Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Castagnari button squeak  (Read 3153 times)

0 Members and 1 Guest are viewing this topic.

Wolfgang

  • Member
  • *
  • Offline Offline
  • Posts: 23
Castagnari button squeak
« on: August 05, 2018, 12:34:08 PM »

Hello everyone!

I've two squeaking bass buttons on my new used Castagnari. It comes from the spot where the little springs rub on the metal levers. I've tried cleaning them thorughly and applying a tiny bit of graphite powder. Worked for two or three weeks, but now the squeak is coming back. Any advice on how to fix that for longer? I thought I should avoid machine oil?

Thanks and greetings,
Wolfgang
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Castagnari button squeak
« Reply #1 on: August 05, 2018, 01:16:03 PM »

It's an annoying and frustrating problem which occurs sometimes. You have done the right thing so far, using graphite. It's best to avoid all oil or grease, as this will only attract dust and muck. You could try the following:

1. Add the graphite in a suspension with a little methanol. The methanol will carry the graphite further than just the powder alone and then will evaporate, leaving a film of graphite.

2. You could try just opening up the 'U'-shaped end of the spring by a tiny amount using a small screwdriver blade or similar. This would reduce the area of contact a little and may solve the squeak, especially if graphite is used too.

3. You seem fairly certain that the squeak comes from the point of contact that you've already mentioned, but it could be coming from elsewhere too; sometimes the coils of the spring can cause squeaks and a bit of graphite/methanol suspension can work here too.



Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

pete /acorn

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 930
  • .Cast Trilly
    • Acorn Instruments
Re: Castagnari button squeak
« Reply #2 on: August 05, 2018, 01:39:10 PM »

I use PTFE dry lubricant spray,Spray some into the cap then apply with small paint brush,
Available fro Toolstation.

Logged
Acorn Instruments are specialist retailers of Castagnari Instruments,and have an extensive stock of new instruments on the shelf for prompt delivery in standard layouts however these can easily be changed to customers special requirements,we have over 600 reeds in stock
 We also have the largest stock in the UK of  pre loved melodons all fully serviced,and with 12 months warranty
UK and international customers catered for
www.acorninstruments.co.uk

Geoff P.

  • Member
  • *
  • Offline Offline
  • Posts: 27
Re: Castagnari button squeak
« Reply #3 on: August 05, 2018, 02:27:41 PM »

I had the same problem, and used Pete's solution successfully, but the squeak has come back again after a few months. Shouldn't happen on a very expensive new box!
Logged

pete /acorn

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 930
  • .Cast Trilly
    • Acorn Instruments
Re: Castagnari button squeak
« Reply #4 on: August 05, 2018, 04:29:50 PM »

Geof
I have sent you an email,I will sort that under warranty

Pete
Logged
Acorn Instruments are specialist retailers of Castagnari Instruments,and have an extensive stock of new instruments on the shelf for prompt delivery in standard layouts however these can easily be changed to customers special requirements,we have over 600 reeds in stock
 We also have the largest stock in the UK of  pre loved melodons all fully serviced,and with 12 months warranty
UK and international customers catered for
www.acorninstruments.co.uk

Wolfgang

  • Member
  • *
  • Offline Offline
  • Posts: 23
Re: Castagnari button squeak
« Reply #5 on: August 05, 2018, 08:28:45 PM »

Thanks for the shared wisdom everyone. My box is still under waranty too, but I don't want to ship it.

I'll try maybe the dry PTFE. Can I use the WD-40 brand, they have a dry product as well?

Greets, Wolfgang

Logged

benammiswift

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 158
  • Squeezing for Derbyshire
    • benammiswift.co.uk
Re: Castagnari button squeak
« Reply #6 on: August 05, 2018, 11:00:46 PM »

Very simple fix, use a screwdriver to push the spring away from the rod a little then apply some graphics from a pencil. Works a treat, took me ages to track it down but fixed on many Castagnaris and is easy
Logged
Castagnari Handry 18

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Castagnari button squeak
« Reply #7 on: August 05, 2018, 11:06:55 PM »

Thanks for the shared wisdom everyone. My box is still under waranty too, but I don't want to ship it.

I'll try maybe the dry PTFE. Can I use the WD-40 brand, they have a dry product as well?

Greets, Wolfgang

Is it as aromatic?
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Wolfgang

  • Member
  • *
  • Offline Offline
  • Posts: 23
Re: Castagnari button squeak
« Reply #8 on: August 06, 2018, 08:09:10 AM »

Very simple fix, use a screwdriver to push the spring away from the rod a little then apply some graphics from a pencil. Works a treat, took me ages to track it down but fixed on many Castagnaris and is easy

Thanks, I'll try that first.
Logged

Wolfgang

  • Member
  • *
  • Offline Offline
  • Posts: 23
Re: Castagnari button squeak
« Reply #9 on: August 06, 2018, 08:11:09 AM »

Logged

pete /acorn

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 930
  • .Cast Trilly
    • Acorn Instruments
Re: Castagnari button squeak
« Reply #10 on: August 06, 2018, 09:33:53 AM »

Hi
Something I have done in the past also,if you undo the spring just rub the rod where the spring sits with some fine wet and dry or emery cloth before applying lubricant
Logged
Acorn Instruments are specialist retailers of Castagnari Instruments,and have an extensive stock of new instruments on the shelf for prompt delivery in standard layouts however these can easily be changed to customers special requirements,we have over 600 reeds in stock
 We also have the largest stock in the UK of  pre loved melodons all fully serviced,and with 12 months warranty
UK and international customers catered for
www.acorninstruments.co.uk

Geoff P.

  • Member
  • *
  • Offline Offline
  • Posts: 27
Re: Castagnari button squeak
« Reply #11 on: August 06, 2018, 12:09:49 PM »

Sorted using Pete's emery paper + PTFE suggestion. Hope it's a permanent fix this time.
Logged

Wolfgang

  • Member
  • *
  • Offline Offline
  • Posts: 23
Re: Castagnari button squeak
« Reply #12 on: August 08, 2018, 08:32:58 AM »

Very simple fix, use a screwdriver to push the spring away from the rod a little then apply some graphics from a pencil. Works a treat, took me ages to track it down but fixed on many Castagnaris and is easy

Thanks, I'll try that first.

Done that, let's see how long it keeps the squeak away. If not, I'll try one of the other sugggested fixes. Thanks again, everyone!

Logged

Wolfgang

  • Member
  • *
  • Offline Offline
  • Posts: 23
Re: Castagnari button squeak
« Reply #13 on: September 08, 2018, 12:32:38 PM »

3. You seem fairly certain that the squeak comes from the point of contact that you've already mentioned, but it could be coming from elsewhere too; sometimes the coils of the spring can cause squeaks and a bit of graphite/methanol suspension can work here too.

I was fairly certain, but it seems I was indeed wrong. No treatment worked out well. Obviously there's a second spot where the spring rubs on the lever (yellow circles). I've tried to bend them away a little and applied some dry lubricant there. Seems that fixed it now, hopefully for a while.


Thanks for all the input! I enjoy my Casta a lot :-)

Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal