Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: How do I get the fingerboard off of my old Double Ray? First post!  (Read 1792 times)

0 Members and 1 Guest are viewing this topic.

Man1nvan

  • Member
  • *
  • Offline Offline
  • Posts: 21

Hello
Have been lurking on here since accidentally taking up this terribly addictive squeezy box thing and I know some of you knowledgeable people will laugh at my inability to remove the fingerboard from the old box I bought in order to further my knowledge of the innards of these strange little creatures.
I have got hold of a very old double ray ( the one in the square pokerwork shaped box) I have re-valved it and am thoroughly enjoying taking it to bits and am astonished that it still works.  Anyway my current issue is, how do I get the fingerboard off? I have removed the screws and it is loose but It will not slip over the buttons.  I can't see any way of removing the top or bottom of it without breaking it.  Do I have to heat up all of the buttons and pull them off before I can take the finger board off?

Any advice greatfully received

Logged
de-clubbed Hohner Modell 1 C/F,  Student D/G, Victoria Club modell

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: How do I get the fingerboard off of my old Double Ray? First post!
« Reply #1 on: August 13, 2018, 10:00:05 PM »

It should slip off, though sometimes it helps to pull from one end and push the buttons down starting from that end.  Sometimes people stuff things inside the keyboard in order to limit button travel.  I’ve seen bits of cardboard, felt, leather, polystyrene and other synthetic materials used.  This can make your task harder.  Sometimes such stuffing can be encouraged to come out of the part removed keyboard by a combination of gravity, and a thin pointed tool poked down beside a button.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Man1nvan

  • Member
  • *
  • Offline Offline
  • Posts: 21
Re: How do I get the fingerboard off of my old Double Ray? First post!
« Reply #2 on: August 14, 2018, 11:53:39 AM »

That worked but it was fairly brutal !  Thanks  (:
Logged
de-clubbed Hohner Modell 1 C/F,  Student D/G, Victoria Club modell

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: How do I get the fingerboard off of my old Double Ray? First post!
« Reply #3 on: August 14, 2018, 11:56:52 AM »

Was there extra stuffing under the buttons?
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Man1nvan

  • Member
  • *
  • Offline Offline
  • Posts: 21
Re: How do I get the fingerboard off of my old Double Ray? First post!
« Reply #4 on: August 16, 2018, 09:57:57 PM »

There was some wood a fag end and a lot of fluff   it smells better now as well  but still sounds awful :-)
Logged
de-clubbed Hohner Modell 1 C/F,  Student D/G, Victoria Club modell

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: How do I get the fingerboard off of my old Double Ray? First post!
« Reply #5 on: August 16, 2018, 10:30:05 PM »

When you re-valved it did you replace the old wax too? That can be a source of reeds sounding terrible when the wax no longer holds the reed plates securely.  Often it's not possible to see that the reed plates are loose, but if you see a whitish line when you scratch the wax with a fingernail then it is dead.  Is there any rust on the reed tongues?  That make put reeds badly out of tune too.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Man1nvan

  • Member
  • *
  • Offline Offline
  • Posts: 21
Re: How do I get the fingerboard off of my old Double Ray? First post!
« Reply #6 on: August 21, 2018, 10:14:04 PM »

I did 're wax them but they are still a bit duff.  They had a fair bit of rust, one reed has snapped off.  A couple came back to life with a bit of poking and cleaning and a couple of others had to be bent a bit to work.  Next step is to bodge up a tuning thingy and attack them with a file.   I bought this box to learn on  and my word what a learning experience it is.  It has saved me several evenings of telly so far.
I have managed to get the c row playable (a long way away from actual people) but the b row   that is a challenge!
The average difference between the reeds of the same note is about 10, the bottom row of reeds all being tuned lower, so it is very warbley,  was this normal for these? 
Also I would say that given the variety of scrapes, gouges and file marks on the reeds that several other people have had a go before me, so if I bugger it up I am not wholly to blame :-)    that said it would be nice to play it one day

Another thing I have noticed is that this box has a noticeably richer lush kind of sound than my later erica so i will persevere
« Last Edit: August 21, 2018, 10:25:23 PM by Man1nvan »
Logged
de-clubbed Hohner Modell 1 C/F,  Student D/G, Victoria Club modell

Barlow

  • Bad player, good talker apparently
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 111
  • Castagnari Lilly B/C Erica D/G
Re: How do I get the fingerboard off of my old Double Ray? First post!
« Reply #7 on: August 22, 2018, 08:44:36 AM »

You have painted a wonderful picture of your situation Man1nVan, which I can relate to, but I would love to see some photos too.
 
Logged
. . .
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal