Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Gaskets  (Read 2958 times)

0 Members and 1 Guest are viewing this topic.

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Gaskets
« on: August 27, 2009, 10:57:07 PM »

Does anyone have an efficient and reliable method for making gaskets to fit between reedblock and soundboard, fondo, thingy?

The best I've come up with so far (for a Hohner Double Ray) is to stick a sheet of gasket material in place on the soundboard and support the box (gasket side) on a hardwood anvil. Using a piece of 12mm O/D pipe sharpened on the inside edge, I then whack it through the hole in the soundboard thus supposedly cutting a neat circle in the gasket. It kind of works but not very well.

Is there a better way?
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: Gaskets
« Reply #1 on: August 27, 2009, 11:18:44 PM »

You might try spending a few pence on some proper hole punches....

Helpful as always
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Gaskets
« Reply #2 on: August 28, 2009, 12:09:16 AM »

............ but how do you get all 42 holes in the right place? Sounds messy to me.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

waltzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 943
Re: Gaskets
« Reply #3 on: August 28, 2009, 12:29:50 AM »

............ but how do you get all 42 holes in the right place? Sounds messy to me.

place a piece of paper over the soundboard and tape in place.  Mark the holes with a pencil, remove the paper and attatch to the gasket material and punch through both paper and gasket material.
Logged

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: Gaskets
« Reply #4 on: August 28, 2009, 04:28:08 AM »

What about gaskets on the blocks ?

Or  make a sandwich of      wood  gasket material  wood

make a jig ( sorry fixture) for your drill press and use brad pointed drill bits to cut clean holes
Logged

HallelujahAl

  • Guest
Re: Gaskets
« Reply #5 on: August 28, 2009, 08:09:11 AM »

Quote
place a piece of paper over the soundboard and tape in place.  Mark the holes with a pencil, remove the paper and attatch to the gasket material and punch through both paper and gasket material.
seems the best method to me.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Gaskets
« Reply #6 on: August 29, 2009, 11:19:12 AM »

I don't do this very often, but I find that I can glue the gasket material in place then cut round each hole with a scalpel with a very sharp blade.  The edge of the hole acts as a guide for the blade. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: Gaskets
« Reply #7 on: August 30, 2009, 02:54:05 AM »

I glued up a sandwich of pine (deal) several sheets of gasket material, another piece of pine
Clamped it all together and drilled holes with my drill press
 a rather satisfactory result...
Logged

Lars

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 797
Re: Gaskets
« Reply #8 on: August 31, 2009, 01:29:05 PM »

What about gaskets on the blocks ?

Hohner did this many moons ago, but not a good idea though... It only takes one drop of wax from the reeds to make the felt a big mess...

I think Theo's desription is the easiest for a one-off project.
Logged

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: Gaskets
« Reply #9 on: August 31, 2009, 04:00:47 PM »

Not if you apply the gasket after you wax

I have  a few accordions with gaskets on the blocks including felting.. not one of them has wax on the block
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal