Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Interspecies breeding?  (Read 1163 times)

0 Members and 1 Guest are viewing this topic.

j.b.c.

  • Good talker
  • **
  • Offline Offline
  • Posts: 61
Interspecies breeding?
« on: August 29, 2018, 10:22:16 AM »

Two questions.

- Which reedblocks can be taken from instrument "A" and without modification placed into instrument "B"?

- Which bass ends can be fit to which treble ends?  Asked differently,  which instruments correspond to which bellows dimension?

Thanx!

Logged

-Y-

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 896
  • Handry 18 (G/C), Mélodie (D), Club IIb (A/D)
    • a database of nearly 500 melodeons here
Re: Interspecies breeding?
« Reply #1 on: September 02, 2018, 12:05:36 PM »

There's no real answer to that, beyond the: "it depends".

Maybe you can switch reed blocks from an accordion to another, but it would most probably need to have been made by the same factory, at a similar time. I don't think reed blocks dimensions are standardized.
Similarly, the size of the cases depends on the instrument. If you're lucky it may fit, but no general rule for it.

j.b.c.

  • Good talker
  • **
  • Offline Offline
  • Posts: 61
Re: Interspecies breeding?
« Reply #2 on: September 02, 2018, 12:23:10 PM »

There's no real answer to that, beyond the: "it depends".

Maybe you can switch reed blocks from an accordion to another, but it would most probably need to have been made by the same factory, at a similar time. I don't think reed blocks dimensions are standardized.

Yet reedplates are standarized, or seem to be highly interchangable, and its all downhill from there.

One would think that the reedplate size determines the reedblock size.

Quote
Similarly, the size of the cases depends on the instrument. If you're lucky it may fit, but no general rule for it.

That makes little sense from a manufacturing point of view.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Interspecies breeding?
« Reply #3 on: September 02, 2018, 12:36:15 PM »


Yet reedplates are standarized, or seem to be highly interchangable, and its all downhill from there.

One would think that the reedplate size determines the reedblock size.

No, because some have reedplates fitted with little or no space between the plates, others have a gap of a few mm between the plates.   Reeds can also have different scale length (the length of the reed tongue for a given pitch)
Quote
Quote
Similarly, the size of the cases depends on the instrument. If you're lucky it may fit, but no general rule for it.

That makes little sense from a manufacturing point of view.

No, but historically many accordions have been largely hand built so standardising sizes was of less significance.   Some larger makers, like Hohner, do have standard size models that have been in continuous production for decades.   The Hohner pokerwork for example has predecessors that have been made as far back as the late 1920s, and have many interchangeable parts.  At the same time Hohner have produced scores of different models with slightly different shapes and sizes. See attached list of Hohner models.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Interspecies breeding?
« Reply #4 on: September 02, 2018, 01:09:19 PM »

Ooh! The Hohner model history is very interesting.

I have been wondering what the model names were for the thirties two row instruments. I would never have thought it would be as simple as "Zweireiher".
Germanic WYSIWYG thinking.
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal