Here's the process I did to limit the button travel on my 60s paolo soprani recently:
- I started off by reverse engineering some work I had done by a tuner in Ireland. He used felt strips to limit the travel on another accordion of mine.
- I was able to find thin felt strips that were sticky on one side so they would be easy to layer to the thickness of my liking.
- Removed the back plate of the fingerboard, there was already a felt strip there which was quite dirty from decades of dust buildup. I used a lint roller to make it look like new again; this also helped with the adhering for the next step.
- Marked out the width of the strip needed by looking at the existing button impressions on the felt.
- Cut the strips to size and stacked them. Turns out I needed 2 of these.
- Limiting the travel like this gave this box a new lease of life. It feels completely different and is way faster to play.
- The only downside I can see to limiting travel is that the pallets can't travel out from the soundboard as much anymore thus changing the tone and lowering the volume slightly.
- Pictures of the whole process attached. Enjoy.