Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: coil springs  (Read 3537 times)

0 Members and 1 Guest are viewing this topic.

chris hall

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 245
Re: coil springs
« Reply #20 on: April 29, 2021, 01:23:55 PM »

i like this precision. I just set one of my Acadians to 160 and it feels nice. set another to 140 and a 150 on another so i can compare. Hard to feel the difference on dry test but its evident when playing. bottoming out on acadian i remedy on mine with EVA self adhesive foam. 10 minute job with the self adhesive stuff. cut slightly narrower than the slot. I use 3mm an an acadian (5mm on a martin)...if you like buttons to go down in to fingerboard try 2mm or 1mm EVA.
Logged

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: coil springs
« Reply #21 on: April 29, 2021, 03:48:22 PM »

i like this precision. I just set one of my Acadians to 160 and it feels nice. set another to 140 and a 150 on another so i can compare. Hard to feel the difference on dry test but its evident when playing. bottoming out on acadian i remedy on mine with EVA self adhesive foam. 10 minute job with the self adhesive stuff. cut slightly narrower than the slot. I use 3mm an an acadian (5mm on a martin)...if you like buttons to go down in to fingerboard try 2mm or 1mm EVA.
Interested in your comparison results ,let us know.

My Beltuna has a button height of 5mm and the box I made is just under 6mm, I just lower them from whatever the maximum is using the standard button.

I find that with the normal cajun style keyboard design you can’t put enough padding to keep the buttons flush to keyboard. Mine with maximum padding while still allowing me to remove the keyboard ends up sinking in to the hole.
One reason why I’ll be doing things different on the project I’m doing now.
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: coil springs
« Reply #22 on: April 29, 2021, 04:12:05 PM »

Here's my keyboard design (from Emmanuel Pariselle). Easy to apply padding under levers.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: coil springs
« Reply #23 on: April 29, 2021, 04:42:05 PM »

Here's my keyboard design (from Emmanuel Pariselle). Easy to apply padding under levers.
Very nice Rees, looks like what I’ve got started :D, we think alike again!!
http://forum.melodeon.net/index.php/topic,23700.msg323984.html#msg323984

Beltuna uses the exact same design but with scissor springs. I like that you can pad it easy and that you can remove the levers if needed.

I just measured my Pepperpot buttons  ( which is not coil sprung ) hows under 50g for light.
« Last Edit: April 29, 2021, 04:46:53 PM by boxcall »
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: coil springs
« Reply #24 on: April 29, 2021, 05:36:26 PM »

I’ve padded under the keys of all my own rows.  Sometimes you have to be incredibly creative when access under the levers is limited. Rees’ design is ideal.
Logged
C#/D player

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: coil springs
« Reply #25 on: April 29, 2021, 06:56:32 PM »

I’ve padded under the keys of all my own rows.  Sometimes you have to be incredibly creative when access under the levers is limited. Rees’ design is ideal.
Matt, I did pad with two strips of the red piano felt = 3mm or less. No room for more on mine with 14mm space inside, button 9mm height , lever 3mm and plus felt.

So yes, Rees’s design it is! or is it Emmanuel’s or maybe Beltuna’s ??? ;)

I used a dovetail jig i have to make a wood jig that I used to make all the cuts. Nice thing with this type dovetail jig is it is easily repeatable and accurate. I could not get the same results using my tablesaw setup, could have been my setup.
I tried Melodie’s (as seen on how it made) keyboard design but failed when routing out the pocket for the keys, got a little to close with router and knock off a leg ( piece between the lever ). Not sure what they do to tie in the legs on the back or do they not? Legs would be prone to moving if nothing was done.
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal