Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: The Green Machine  (Read 3654 times)

0 Members and 1 Guest are viewing this topic.

Fred

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 719
  • G/C Pariselle, D/G Loffet & maybe too many Hohners
Re: The Green Machine
« Reply #20 on: October 28, 2018, 02:48:50 PM »

That seems a high price for something in such poor condition and with no treble reeds.

I'm shocked by the condition and the asking price.  :o
Logged

Pat McInnis

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 390
Re: The Green Machine
« Reply #21 on: October 28, 2018, 03:54:52 PM »

That seems a high price for something in such poor condition and with no treble reeds.

Yankee dollars too. It would have been $160 by the time it landed here in Canada. Pass.
Logged

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: The Green Machine
« Reply #22 on: November 07, 2018, 01:20:55 PM »

Just a small point which may or may not be of use.  I had several broken bass buttons on my Pokerwork, so bought a new set.  They pull off the rods, which are actually stamped from sheet.  I didn't notice before fitting the new ones, so can't make a recommendation based on practical experience, but...  The new buttons come with a round hole drilled in the centre and are tapped down onto the rectangular section "rod" BUT the shoulders which set the full depth of insertion are not level so it is easy to get the new buttons askew.  I would suggest filing down the higher should to match the lower one.  I can't tell you how p*ssed I was to have one of my new buttons also p*ssed! (one tap too many with the toffee hammer)

Rob.
Logged

Pat McInnis

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 390
Re: The Green Machine
« Reply #23 on: November 07, 2018, 03:03:19 PM »

Just a small point which may or may not be of use.  I had several broken bass buttons on my Pokerwork, so bought a new set.  They pull off the rods, which are actually stamped from sheet.  I didn't notice before fitting the new ones, so can't make a recommendation based on practical experience, but...  The new buttons come with a round hole drilled in the centre and are tapped down onto the rectangular section "rod" BUT the shoulders which set the full depth of insertion are not level so it is easy to get the new buttons askew.  I would suggest filing down the higher should to match the lower one.  I can't tell you how p*ssed I was to have one of my new buttons also p*ssed! (one tap too many with the toffee hammer)

Rob.

This is a great small point. You may have save me from throwing a wrench through my window. Hah You glued them too or just pressure fit?
Logged
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal