Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Flowable Silicone  (Read 3448 times)

0 Members and 1 Guest are viewing this topic.

stevejay

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 709
Flowable Silicone
« on: September 01, 2009, 05:59:35 PM »

Would flowable silicone be totally unsuitable as a substitute for wax in setting reeds?
I guess yes, but would like to hear why.. Maybe it wouldn't hold well, but it does in other applications..
Sorry, it just crossed my mind, and a person could just walk to a harware store to purchase it. ;D
« Last Edit: September 01, 2009, 06:02:00 PM by stevejay »
Logged

RGF

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 214
Re: Flowable Silicone
« Reply #1 on: September 01, 2009, 06:29:48 PM »

I'm really just a hobbiest at this, and I'm sure there will be more authoritative comments to follow, but I can think of several reasons why I would not want to try that. For one, it won't really flow in the same way that wax does -- wax just puddles out so smoothly when you manage to get it right.  If I had to remove/replace a reed for some reason, I think it would be much easier to do if it were waxed in place. And -- here's where my amateur "expertise" falls short -- I think the wax has the property of contracting somewhat as it cools, drawing the reed plate back tightly against the block. (I may stand corrected here.)

But I think the biggest reason might just be due to the aromas involved....silicone sealant so reminds me of sticking one's nose in the vinegar bottle, while I find reed wax to be most pleasant. To paraphrase the famous line from Apocalypse Now: "I love the smell of reedwax in the morning!"

Bob
Logged

HallelujahAl

  • Guest
Re: Flowable Silicone
« Reply #2 on: September 01, 2009, 06:54:44 PM »

I think that it appears on the surface to be a good suggestion. But who's going to try it? I really like the idea of just sticking a tube of the stuff into a gun - shaving off a nossle - and goo and go! But I'm never going to test the theory ;D
AL
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Flowable Silicone
« Reply #3 on: September 01, 2009, 06:58:57 PM »

I have always believed that if a method has been tried and found successful over a long period then at the very least I should try the traditional method first, then try to innovate.  That way you have a sound basis for comparison and you can judge whether the new method has advantages.

What I can say emphatically is that silicone or any adhesive are not a good substitute for bellows gaskets!  I have had a couple of occasions to remove badly applied silicone from reeds, it was not fun!

In theory I don't think silicone would be effective for these reasons:

- difficult to remove when a reed has to be replaced,
- more difficult to get an airtight seal unless it flows as easily as melted wax
- its probably to soft to make a good acoustic link between reedplate and reedblock.

If you want a less messy alternative to wax you could try screws as used by some of the best quality accordions
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Andy Simpson

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 938
Re: Flowable Silicone
« Reply #4 on: September 01, 2009, 07:38:27 PM »

Silicone is nigh on impossible to remove completely. Wax probably wouldn't adhere properly to the reedblocks or reedplates once it had been used so there'd be no going back.
« Last Edit: September 01, 2009, 07:47:31 PM by WhatsAMelodeon? »
Logged

Falseknight

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 449
    • False Knight
Re: Flowable Silicone
« Reply #5 on: September 01, 2009, 08:38:26 PM »

Silicone doesn't re-adhere to old silicone - let alone anything else.

I suppose my worry with wax (though in this weather it's possibly not the problem it could be) is that the properties are too temperature dependent - it gets brittle when cold and softens over quite a wide range of temperature - so reeds can drop off if insufficient care is taken.

Perhaps if someone could come up with a formulation with a sharper solid/liquid transformation - maybe at say 14-20 deg C higher temperature that would be a useful way forward.
Logged

an bosca ceoil

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 347
Re: Flowable Silicone
« Reply #6 on: September 02, 2009, 02:21:26 AM »

Silicone DOES adhere - to everything you do not want it to - and in my estimation wax is far more "user friendly"
 in comparison.
You can vary the proportion of wax to rosin for extremely hot or cold climates but I was told that you could make it "tougher" by adding dental wax.
Logged

Falseknight

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 449
    • False Knight
Re: Flowable Silicone
« Reply #7 on: September 02, 2009, 07:43:10 AM »

I'll rephrase that - nothing else will adhere to old silicone either.
Logged

Malcolm Austen

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 495
  • any old hohner
Re: Flowable Silicone
« Reply #8 on: September 02, 2009, 08:51:28 AM »

The two part Silicone are very corrosive to aluminium, I do not know about the single part silicone in a tube but it may well do.
I would think that the main problem with silicone is that they are flexable when set, which is the last thing you want, wax will shrink as it solidifies and pull the reed plate firmly down onto the reed block.
Logged
aka malodeon

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Flowable Silicone
« Reply #9 on: September 02, 2009, 11:19:35 AM »

A customer at Sidmouth brought in a Russian Garmoshka. It's one of those pink things with two bells on that turn up on eBay now and then. It's like a normal melodeon but with all the notes reversed - I had great fun at Sidmouth asking people to play it.

Anyway, the customer wished me to turn all the reeds over so that it played "properly" (a travesty in my opinion, but the customer is always right).
No problem says I. Ha!
Instead of reed wax those pesky Garmoshka builders use the Russian equivalent of Araldite.
The reed blocks are made from very thin matchwood, so that every time you dig a reed out half the reed block tears away with it.

Be warned!
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Malcolm Clapp

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1119
  • Loving my Hohner-reeded wet MMM CastaTommy
Re: Flowable Silicone
« Reply #10 on: September 02, 2009, 12:50:05 PM »

The two part Silicone are very corrosive to aluminium,

I've seen Hohner Atlantic piano accordions from the late 1950s (?) with reedplates attached with silicone, but interestingly, the reedplates were a gold colour (annodised?).  Perhaps they had experienced corrosion problems at the R & D stage??? I saw some of these in UK, so it wasn't a "tropical" treatment just for the Oz market.
Logged
Tuner/repairer, now retired.
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal