Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Hohner 114 Reed waxing  (Read 1241 times)

0 Members and 1 Guest are viewing this topic.

Larry Corn

  • Member
  • *
  • Offline Offline
  • Posts: 8
Hohner 114 Reed waxing
« on: November 19, 2018, 06:08:12 PM »

First time post here so greetings to all. If I may, please permit me to ask a question. How do you folks wax those second and third row reeds in a 114. It's probably been addressed somewhere in here but either I'm not finding it or not grasping it. I was fortunate enough to have picked up a small bit of knowledge from an old Italian repairer, but that was 30 years ago. And those reed blocks were removable!
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hohner 114 Reed waxing
« Reply #1 on: November 19, 2018, 06:28:07 PM »

It is tricky! In simple terms:
The two outward facing banks of reeds are ok, just use your normal method.

For the inner reed banks:
Some hot wax on the bottom end of the reed plate then press into place. Repeat for all the plates. Then run melted wax down between the plates, than run a bead of wax along the top edges.

Then tune all the reeds.

Easier said than done, but not impossible.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Larry Corn

  • Member
  • *
  • Offline Offline
  • Posts: 8
Re: Hohner 114 Reed waxing
« Reply #2 on: November 21, 2018, 02:14:59 PM »

That was a great idea. Thanks.
Logged

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Hohner 114 Reed waxing
« Reply #3 on: November 21, 2018, 02:36:35 PM »

In addition to other methods, I’ve also used a paintbrush to get wax in there but you need a very steady hand and a lot of patience.
Logged
C#/D player

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hohner 114 Reed waxing
« Reply #4 on: November 21, 2018, 02:54:23 PM »

I've never tried a paintbrush, though I've seen a video demo.  It looks like it would be slower than my method (I'm pretty fast!) and as far as I can tell the paintbrush deposits a fairly thin layer of wax.  I like to get a good solid bead of wax around every plate.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Hohner 114 Reed waxing
« Reply #5 on: November 21, 2018, 06:31:14 PM »

I've never tried a paintbrush, though I've seen a video demo.  It looks like it would be slower than my method (I'm pretty fast!) and as far as I can tell the paintbrush deposits a fairly thin layer of wax.  I like to get a good solid bead of wax around every plate.

Yes, Theo, you are correct. One has to build up the wax in a few (quick) layers. I do believe your method would work quicker, and I plan on trying that out myself the next time I wax.
Logged
C#/D player

MarioP

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 217
  • Enjoying the MADNESS
    • AnyITsolution.Services
Re: Hohner 114 Reed waxing
« Reply #6 on: November 22, 2018, 01:20:58 AM »

I may try this on my preciosa .. thanks as well..
Logged
Hohner Corso A/D x2, G/C, Corona II A/D/G from the 60s.
Hohner Pre Corona II BsEsAs,Club IV C/F Pre-War, Liliput C/F, Mignon I (G) Piano from the 30s, Kromatica III from the 60s harmonica. Hohner Kids I. Pearl Forum series 80s, Zildjian, Sabían, Wuhan cymbals. Ludwig snare 70s.

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Hohner 114 Reed waxing
« Reply #7 on: November 27, 2018, 12:13:13 AM »

"I like to get a good solid bead of wax around every plate."

So do I, now. Today, I was playing my 114G, which I've still not finished modifying to my liking, and when I picked it up from the floor, I heard something rattling inside. Lo and behold, a bass-end reedplate had fallen off!

My modifications have been confined to the bass-end, where I've waxed everything, instead of glueing, so that I can undo what I've done and change it at will. Since the last messing about, the C/B bass seemed rather muted, and I thought it might be because the home made chamber was too big. It was the higher octave reed which fell off that particular block. No bother, I'd just wax it back in.

When I got down to it, I decided to take Theo's advice and pile a bit more wax in there (to stop it falling off again!) plus topping up the other reedplates while I had the soldering iron hot. I was astonished at the difference it made to the volume, all the modified bits are now super loud, I just hope they aren't too loud for the rest of it!

Thanks again, Dear Leader.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal