Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2 3   Go Down

Author Topic: Instrument mic(s)  (Read 7417 times)

0 Members and 1 Guest are viewing this topic.

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Instrument mic(s)
« on: November 24, 2018, 09:13:55 AM »

Not sure if this is the right place for this...
Apart from Microvox, anyone use other make/type of clip on mics for their box(es). I’m looking for a solution that can easily be swapped from one instrument to another, but that is clip on/velcro whatever, rather than installing an internal mic (which might be the way to go but I don’t really want to be drilling holes in the case). Gear4music have quite a selection of other instrument mics...just wondering if anybody can offer advice. Currently I have a couple of mics on a stand but these get in the way and aren’t hugely convenient.

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Instrument mic(s)
« Reply #1 on: November 24, 2018, 09:30:11 AM »

In the past I've used AKG 416 goose neck mics, now superceded by the 516 I believe.
The mics had a clip on the distal end which clipped into a small oval plastic plate mounted on the upper surface of the instrument case. I used two mics for the treble and bass ends.

The plastic plate could be secured to melodeon using one of these options:

1. screwed/bolted through the case work
(you say you don't want to do this; I didn't either).

2. temporarily secured with the plastic 'putty' supplied by AKG.
(I used a substantial blob of Blu tack, which worked quite well and enabled me to experiment with the ultimate placing positions)

3. Self-adhesive Velcro patches; 'hooks' applied to the plastic oval plate, 'furry bit' applied to the melodeon. Easy to swap mics. Worked very well for a number of years until I sold the melodeon. Since then I've taken to using stand mics.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Instrument mic(s)
« Reply #2 on: November 24, 2018, 09:38:20 AM »

Thanks Steve.

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Instrument mic(s)
« Reply #3 on: November 24, 2018, 09:46:45 AM »

I still use a 416 on my C one-row, as it's easy to mount & dismount as required, not to mention sounding pretty good. I take it we're talking mics for live work?

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Instrument mic(s)
« Reply #4 on: November 24, 2018, 09:55:10 AM »

Yes that’s right

Gena Crisman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1108
  • 🇬🇧
Re: Instrument mic(s)
« Reply #5 on: November 24, 2018, 10:26:12 AM »

I needed a pickup and while considering my options, I came across, via Amazon, a Myers Pickup, from the USA. I've used it in some recordings of me playing since I've stopped borrowing the H2n I've used previously. If you refer to my submission for the Hesleyside Reel, you can see the pickup attached to my instrument: https://www.youtube.com/watch?v=KsGKLVxfEZk - However, the audio was mixed with that of another microphone, so, I want to quickly demo what the individual parts of the process sounded like.

Here's a quick demonstration of the actual audio: https://soundcloud.com/user-889775496/melodeon-myers-pickup-demo

So, I'd say it's... pretty OK? If perhaps a bit pricy for what it is, but, production quality, warranty, accessories etc. I'm pretty certain that it's on par/more expensive vs other options, and I'm thinking not as good as most of the piecemeal solutions you could put together with larger mic capsules. But, I just wanted a hassle free experience since I also had to organise pretty much everyone else, and potentially having a pickup I could use on a non melodeon instrument seemed valuable to me (I also play the baritone ukulele).

I think with a bit of EQ it's perfectly fine for live work, otherwise it sounds a little bit... I'm not even sure the right adjective. Critically to some, there is no bass volume balance control, it just spews the whole lot mixed together out over a single 1/4 TS cable, and uses an internal coin cell for power (doesn't want phantom power). For posterity, I'm using a Behringer UMC404HD Audio Interface that seems to be generally considered 'decent', with the pickup connected for instrument rather than line level. No noise reduction effects or EQ was performed on the recording, and any periods of true silence are from me editing together multiple takes of me speaking or quieting out gross lip smacking noises.

I'm not sure that I would whole heartedly recommend it - I don't regret buying it or anything, I just haven't had the opportunity to try anything else.
Logged

Howard Jones

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1203
Re: Instrument mic(s)
« Reply #6 on: November 24, 2018, 11:52:13 AM »

I use an AKG 516 which I find is fine for live work, and has a more robust mount than the discontinued 416 which tended to break (I still use a 416 on the bass end.  My melodeon is pretty battered, so I didn't mind permanently fixing the mounting plate onto it, but you could use velcro or the supplied 'putty'.  AKG also do clip-on versions which have the same mic capsule.  NB this requires phantom power.   AKG seem to have discontinued the battery power supply unit but Thomanns make a clone, or if your mixing desk supplies phantom power there is a separate adaptor.

Thomanns tbone CC75 is a cheap workhorse clip-on mic which is adequate for live work.  I find the problem is finding something to clip them to, but I've used them on the bass end of the melodeon and on my anglos, clipped to the hand straps. I've had a couple of reliability issues but Thomanns were very good about replacing them, and anyway they're cheap as chips (at least before we leave the EU).

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Instrument mic(s)
« Reply #7 on: November 24, 2018, 12:03:15 PM »

Lots of v helpful suggestions. Thanks. I like Gena's mics but not the price  (:) I hadn't seen the Thomann's offering. And I quite like the C518...

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Instrument mic(s)
« Reply #8 on: November 24, 2018, 12:10:07 PM »

Thomanns tbone CC75 is a cheap workhorse clip-on mic which is adequate for live work.  I find the problem is finding something to clip them to, but I've used them on the bass end of the melodeon and on my anglos, clipped to the hand straps. I've had a couple of reliability issues but Thomanns were very good about replacing them, and anyway they're cheap as chips (at least before we leave the EU).

From the Thomanns website


The price in GBP is a guideline price only! 

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Instrument mic(s)
« Reply #9 on: November 24, 2018, 12:42:03 PM »

At the risk of avoiding your question, why don't you like the Microvox Roger?  I've found it's the cheapest and easiest to use system and gives a more than adequate result for live gigging. Also, it has the advantage that you only need one input for bass and treble. Works great with an Xvive wireless link, as well.

The Myers pickup recommended by Gena seems to have the same advantages. It costs 50% more but, maybe, the sound quality is better.
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Stotty

  • Stotty
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 191
Re: Instrument mic(s)
« Reply #10 on: November 24, 2018, 01:35:56 PM »

At the risk of avoiding your question, why don't you like the Microvox Roger?  I've found it's the cheapest and easiest to use system and gives a more than adequate result for live gigging. Also, it has the advantage that you only need one input for bass and treble. Works great with an Xvive wireless link, as well.

The Myers pickup recommended by Gena seems to have the same advantages. It costs 50% more but, maybe, the sound quality is better.

I wondered if you had found s atisfactory wireless kit!  have also been pleased with a couple of quick trys with the Microvox / Xvive combination (with a borrowed Microvox) on a Nuage with a metal grill.  Not sure I want to stick velcro on a wooden grill yet!

I have used a "Smooth Hound" wireless kit on my Streb and that is also good, but not quite so convenient as the Xvive  because it needs mains power at the receiver end and 2 x AAA batteries in the transmiter end, whereas the X-vive is rechargeable at both ends.

We have tried a Myers set on a English concertina with the two pick-ups tucked into the folds of the thumb straps at each end (and the jack plug connection box on the players belt).  The Myers pick-ups seems OK, but not much "gain".
Logged

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Instrument mic(s)
« Reply #11 on: November 24, 2018, 01:51:02 PM »


I wondered if you had found s atisfactory wireless kit!  have also been pleased with a couple of quick trys with the Microvox / Xvive combination (with a borrowed Microvox) on a Nuage with a metal grill.  Not sure I want to stick velcro on a wooden grill yet!

I have used.  a "Smooth Hound" wireless kit on my Streb and that is also good, but not quite so convenient as the Xvive  because it needs mains power at the receiver end and 2 x AAA batteries in the transmiter end, whereas the X-vive is rechargeable at both ends.


I'm the other way round: My own Microvox and a borrowed Xvive U2 (from our fiddler). I think it's a brilliant piece of kit. Self contained, mains free (essential for playing out) and a charge lasts at least 3 hours. There are cheaper options but they don't seem as reliable. I hope I'm having one for Christmas. I've dropped gentle hints like sending my wife links showing exactly what I'm after.
« Last Edit: November 24, 2018, 01:53:40 PM by Tone Dumb Greg »
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Instrument mic(s)
« Reply #12 on: November 24, 2018, 02:31:55 PM »

If the reason for wanting the mic is for live gigs with a PA, I'd strongly suggest not using any solution which combines bass and treble into a single channel, because it makes it impossible for whoever is doing the sound to either change the balance between the two ends, or use different EQ on the two to get the best sound, or bring up just the treble end when the box is taking the lead. It's like stripes on toothpaste, if you keep them separate you can always mix them afterwards (into a single input channel if necessary) but the reverse is impossible...

You might not think this is a problem now if it's just you plugged into a PA on your own or with a small band and nobody on the desk, but sooner or later you're going to get sworn at for having a single channel ;-)
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Instrument mic(s)
« Reply #13 on: November 24, 2018, 03:11:47 PM »

If the reason for wanting the mic is for live gigs with a PA, I'd strongly suggest not using any solution which combines bass and treble into a single channel, because it makes it impossible for whoever is doing the sound to either change the balance between the two ends, or use different EQ on the two to get the best sound, or bring up just the treble end when the box is taking the lead. It's like stripes on toothpaste, if you keep them separate you can always mix them afterwards (into a single input channel if necessary) but the reverse is impossible...

You might not think this is a problem now if it's just you plugged into a PA on your own or with a small band and nobody on the desk, but sooner or later you're going to get sworn at for having a single channel ;-)

That's one of the reasons I am interested in why Roger wants alternatives to Microvox units.
 
You make a fair point if your talking in the context of stage work. I don't do much but, if I do, I prefer to use a mic on a stand for the treble side. A Sure SM57 is plenty good enough for me. I have an old Microvox twin pickup bass unit I use with it, with the output delivered via a belt Power Supply.

Getting down and dirty playing for border morris is a bit different. I want maximum mobility and acceptable sound.
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Instrument mic(s)
« Reply #14 on: November 24, 2018, 04:15:41 PM »

If the reason for wanting the mic is for live gigs with a PA, I'd strongly suggest not using any solution which combines bass and treble into a single channel, because it makes it impossible for whoever is doing the sound to either change the balance between the two ends, or use different EQ on the two to get the best sound, or bring up just the treble end when the box is taking the lead. It's like stripes on toothpaste, if you keep them separate you can always mix them afterwards (into a single input channel if necessary) but the reverse is impossible...

You might not think this is a problem now if it's just you plugged into a PA on your own or with a small band and nobody on the desk, but sooner or later you're going to get sworn at for having a single channel ;-)

That's one of the reasons I am interested in why Roger wants alternatives to Microvox units.
 
You make a fair point if your talking in the context of stage work. I don't do much but, if I do, I prefer to use a mic on a stand for the treble side. A Sure SM57 is plenty good enough for me. I have an old Microvox twin pickup bass unit I use with it, with the output delivered via a belt Power Supply.

Getting down and dirty playing for border morris is a bit different. I want maximum mobility and acceptable sound.

I also use a stand mic for treble and a clip-on for bass -- a cheap cardioid tie-clip clipped on inside the bass end strap, cost me less than a tenner.

(reason is so it only picks up the bass end, a gooseneck clip-on picks up some treble end as well, which is a big problem when using a POG on the bass end, you don't want a very slightly delayed quiet octave-down treble end accompanying you...)

If you're playing for border at a festival or stage/ceilidh spot then usually where there's a PA there will also be an array of stand mics and a sound guy, who would generally prefer not to be hooking up individual instrument mics and having to find and set up a channel for them.

IIRC the Microvox mics all have a single output with a balance control. They also use unreliable connectors like phonos and jacks which are just asking for trouble when you're moving around (I've seen/heard plenty). If you want to use clip-ons I'd agree that a couplke of AKGs or their cheaper clones are probably the best solution -- the AKGs are obviously not cheap, though...
« Last Edit: November 24, 2018, 04:27:44 PM by IanD »
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Instrument mic(s)
« Reply #15 on: November 24, 2018, 04:40:00 PM »


...the Microvox mics all have a single output with a balance control...

They also make discrete bass and treble units. The 400 and the 305. The bass unit needs a power supply.
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Andy Next Tune

  • aka Andy Wooles
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1127
  • Melodeon with Accidentals? Make a PI Claim!!!
    • www.shavethedonkey.co.uk
Re: Instrument mic(s)
« Reply #16 on: November 24, 2018, 05:02:41 PM »

The Microvox PSU's take two mics as input but then deliver a single combined output signal. There is also a third party Microvox power supply which acts as a DI box as well, with XLR rather than jack output, however it is still a single combined signal.

If you already have Microvox kit and would like two separate output signals, then speak to Rachel at Microvox. She has made dual output PSU's for a few people in the past at a similar cost to a standard PSU. (I enquired last year, but did not go ahead in the end.)
Logged
Andy, from the now ex-County Palatine of Cheshire

Caring for a European community of melodeons from France, Italy, Germany, Wales and Suffolk!

Gena Crisman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1108
  • 🇬🇧
Re: Instrument mic(s)
« Reply #17 on: November 24, 2018, 05:28:20 PM »

I like Gena's mics but not the price

Yeah... I believe I only decided to take the chance on the Myers since I priced up a Microvox 400 + 405 + PSU unit, and that worked out (and still seems to work out as) more expensive, and playing a fairly compact Black Pearl 2, I wasn't sure the 310 would be a good fit for it. It didn't help that I had had the opportunity to interact with an m310 unit and didn't really like the options for attaching it or how it was physically constructed.

Honestly it was very difficult to find what felt like informative/non marketing reviews and examples of any pickup systems - Myers seem to have have encouraged a good few people to try their products on youtube but, well, that's more like an un-reccomendation for me sometimes. For equipment that is ostensibly able to be used to let you record your instrument, recordings seemed few and far between. Tell you what, don't know why I never thought about it until now, but, next week I'll ask to borrow the M310 from its current custodian and drum up a recording of it, because frankly even I want to know how the two compare.

I did have concerns over sending my audio all over one cable, but, that works super conveniently when it's fine and means I wasn't hogging inputs on our somewhat limited mixer (we also have a hard no-phantom-power rule right now), and I didn't feel like it would be an issue down the line since, as noted here, one of the most common solutions is
a clip-on for bass -- a cheap cardioid tie-clip clipped on inside the bass end strap, cost me less than a tenner.
And I figured if it was ever a problem, I'd just do that.
« Last Edit: November 24, 2018, 05:32:25 PM by Gena Crisman »
Logged

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Instrument mic(s)
« Reply #18 on: November 24, 2018, 06:01:19 PM »

I have a couple of matched mics to go on a stand, and I also have a Behringer 802 mixing console, with phantom power etc so I can feed to the PA (and plug in my geetar when I need to). So I don’t really want the power supply stuff with a Microvox. The AKG mics with clips might work ok.  But i need to switch from melodeon to pa (sorry everybody...) and back quite quickly....so maybe the stand mics are best anyway. But I like the idea of clipped in swan neck mics, which don’t need power supply and are cheaper than the Microvox. I was put off by the MV because it’s quite big and ugly....which sounds like unfounded prejudice as I write this. Perhaps I should stick to mics on a stand. ...

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Instrument mic(s)
« Reply #19 on: November 24, 2018, 06:48:36 PM »

I think you are right to move away from Microvox.  As IanD says the connectors are not the best.  I’ve had quite a lot of experience running a sound desk with people using Microvox pickups and those particular ones were plagued by unreluabke connections.  For me the sound quality is not quite good enough, even for live stage settings.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: [1] 2 3   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal