Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: reducing bellow folds  (Read 3804 times)

0 Members and 1 Guest are viewing this topic.

mikesamwild

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 638
  • Melodeon, Button Accordion, Anglo Concertina
reducing bellow folds
« on: September 02, 2009, 11:25:41 AM »

I was at Whitby and in a Moor Music workshop we discussed bellows 'play'
Mark Bazely said Bob Cann his Grandad said keep the action tight.  One woman said her tutor taped some of the folds to do the same.

In a session Chris Sherburn was playing an Anglo Concertina with 4 fold bellows ( a lot fewer than usual)  This seems to give more pressure control and speed of ornamentation , I suppose you need nifty air button control.


Has anyone either reduced the number of folds or taped some together in a controlled experiment, and with what conclusions?)

After my first years on a Pokerwork for Moris in the rain and wrecked bellows, when you couldn't easily buy replacements , I concentrated on tight bellows control and cross row playing etc
Logged
Mike in Sheffield

If music be the food of love -who finds the time?

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: reducing bellow folds
« Reply #1 on: September 02, 2009, 12:10:04 PM »


In a session Chris Sherburn was playing an Anglo Concertina with 4 fold bellows ( a lot fewer than usual)  This seems to give more pressure control and speed of ornamentation , I suppose you need nifty air button control.


Isn't it more likely to be down to Chris Sherburn's skill as a concertina player? 

Hands up everyone who has tried to emulate a great player by getting the same instrument, and then been disappointed with the result.  :( My hand us up! 

Need a hands up emoticon.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

HallelujahAl

  • Guest
Re: reducing bellow folds
« Reply #2 on: September 02, 2009, 01:07:12 PM »

Quote
Hands up everyone who has tried to emulate a great player by getting the same instrument, and then been disappointed with the result.   My hand us up! 

YUP! Me too  >:(

An experience that I can relate to bellows folds is when I made my first set of concertina bellows. I decided after looking at the maths that a deeper bellows fold would enable the player to be able to move more air around, give greater control and generally be a better set of bellows rather than a shallow set. The theory was great, but in practice the folds at the ends nearest to the inner reed sets interfered with reeds and valves when closing the bellows up creating a grating sound. So  :-[  it was back to the drawing board and I had to make myself a completely fresh bellows jig - which I duly did. Then I discovered Bob Tedrow's method of bellows manufacture which doesn't use a full-blown bellows jig! Blast...Still I now can make bellows of any number of folds etc

BTW I don't believe fewer folds gives any greater control - in fact possibly less as you could end up struggling to play notes (especially where you have a string of notes on the pull for example) that with a full size bellows you'd have no problems getting. I think that a tight action probably has much more to do with other factors - like how aggressively, loudly you play - button action - etc.
AL
Logged

george garside

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5401
Re: reducing bellow folds
« Reply #3 on: September 02, 2009, 01:43:56 PM »

short bellows can only play short whereas long (normal) lngth ones can play long & short as required.    Whilst I am a strong advocate of playing with as little bellows open as possible to provide more control  there are certain parts of certain tunes ( in certain keys!) that leave the plaayer with no choice but to open them up wide, preferably for as short a time as possible. With ultra short bellows you would be well & truly  buggered!

george ;D
Logged
author of DG tutor book "DG Melodeon a Crash Course for Beginners".

TomB-R

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 598
Re: reducing bellow folds
« Reply #4 on: September 02, 2009, 02:00:36 PM »

If a player like Chris Sherburn uses four fold bellows (as MSW says and as you can see in photos,) one assumes there's a reason for it!

I guess he does a lot more fast playing than slow.
Logged

HallelujahAl

  • Guest
Re: reducing bellow folds
« Reply #5 on: September 02, 2009, 03:34:35 PM »

Quote
If a player like Chris Sherburn uses four fold bellows (as MSW says and as you can see in photos,) one assumes there's a reason for it!

I guess he does a lot more fast playing than slow.
Four fold bellows are very common in concertina hexagons circles - perhaps even more so on English & Duets than Anglos, but quite often enough especially at the bottom end of say the Lachenal range. The reason is probably because that's what he learnt on - or that's what he prefers etc...

But in melodeon terms I can see no good reason at all for taping up one's bellows - it might make one look a bit Jimmy Shandish, but it certainly won't enable you to play like him!

Mind you - I made myself an eight-fold set of bellows for my Wheatstone EC - brill ;D never run out of air...ever
AL
Logged

Howard Jones

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1203
Re: reducing bellow folds
« Reply #6 on: September 02, 2009, 03:52:39 PM »

My first anglo concertina had only 5-fold bellows, and I certainly appreciated the difference when I moved up to another instrument.  It taught me to use the air-button though.  However the construction has a lot to do with it - my current instrument (a Crabb) has only 6 folds but more "stretch" than a Lachenal I had previously which had 7 folds.

I think this is far more critical with concertinas (anglos anyway) than with melodeons, which usually seem to have ample bellows capacity.  With both instruments, however, the key is in using the air button and forward planning in which direction to play phrases, in order to make the best use of what you've got.

It's good to learn to play with minimum bellows movement as this can improve control.  However, I can't see any benefit in deliberately reducing the capacity of your bellows, except perhaps as a temporary learning aid

Randal Scott

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 399
  • Detroit MI
Re: reducing bellow folds
« Reply #7 on: September 03, 2009, 10:42:50 PM »

Has anyone...reduced the number of folds..?

I'm still trying...been dieting for a year!
Logged

Chris Brimley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2038
Re: reducing bellow folds
« Reply #8 on: September 08, 2009, 12:35:33 PM »

Something that I've wondered about is why it is that all box makers assume that the LH side should be the same size as the RH?  What's wrong with the LH side being smaller? It's got fewer buttons, and it needs to be lightweight.  You can get a pretty good bass sound from relatively small box, so I don't think that's the reason.  The bellows folds would have to reduce in size from right to left, but is that a problem?
Logged

TomB-R

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 598
Re: reducing bellow folds
« Reply #9 on: September 08, 2009, 12:46:19 PM »

Something that I've wondered about is why it is that all box makers assume that the LH side should be the same size as the RH?  What's wrong with the LH side being smaller? It's got fewer buttons, and it needs to be lightweight.  You can get a pretty good bass sound from relatively small box, so I don't think that's the reason.  The bellows folds would have to reduce in size from right to left, but is that a problem?

On the basis of my extensive experience of bellows making (ok, one set) I'd say it could be done, but you'd need a very good reason!
For a start the "trenchboard" the folded cardboard would have to have offset rather than equal folds otherwise the bellows wouldn't close. All the bellows papers would be different lengths (well, pairs of each length) and the same with the bellows tape.

It "could" be done, but blooming hard work!

Al will be able to say how hard it would be with concertina style bellows construction.
Logged

Chris Brimley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2038
Re: reducing bellow folds
« Reply #10 on: September 08, 2009, 02:32:28 PM »

TomB-R, are these problems insurmountable?  I'm not a craftsman, but at first sight I would have thought there could be a number of fixes for the problems you set out?  For example, how about if each bellow was joined with a sort of nh section, it might be easy. (I don't know if this will come out in translation, but the idea is that the 'n' is joined to the top part of the 'h'.)
Logged

HallelujahAl

  • Guest
Re: reducing bellow folds
« Reply #11 on: September 08, 2009, 04:02:37 PM »

Using hinged bellows cards (a la concertina bellows construction) would make the idea of reducing the folds in size a reasonable thing to prosecute. But I'm still unsure why you'd want to do it? Concertina type bellows of all shapes and sizes have been produced in the past - mainly for circus acts & music-hall shows I think. Some have even had bellows specially constructed so that they 'split' down the middle during the performance but still enable the instrument to carry on playing at one end.

I've been thinking long and hard about using concertina type bellows construction for melodeon bellows. Its been done before quite successfully I believe (Johann Pascher has sent me pictorial evidence). And would not necessitate applying metal bellows corners. The only thing is it would look a little 'odd' - but that's a minor issue.

The other factor is that one could also choose to have as many folds as one liked. Hinged boards would also mean that the bellows wouldn't be all stiff and hard to play in. In fact they probably wouldn't need playing in at all.
AL
Logged

TomB-R

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 598
Re: reducing bellow folds
« Reply #12 on: September 08, 2009, 05:31:53 PM »

I'm certainly not saying it couldn't be done Chris, and with some industrial-type tooling up it could be quite easy, once the tools and jigs are made!

OTOH an "easy" way to do it would be with camera style bellows construction. Tapering bellows are normal there, and there are instructions on the web of how to build them. Using "nice" concertina materials they could be durable too

Years ago I had a bizarre little Chinese "one row" with a very rounded and arguably futuristic shape! Anyone remember them, or have one?  That had camera style bellows with zigzag corners.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal