Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: My stops won't stop ...  (Read 9133 times)

0 Members and 1 Guest are viewing this topic.

Bananayogi

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 147
My stops won't stop ...
« on: September 03, 2009, 08:32:55 PM »

.. where I want them!!

On my 1 row 4 stop Hohner, the damm things keep sliding back down. I've improvised with pegs, elastic bands etc, but either it looks daft or doesn't work properly. Mostly both.

I guess it's just that using the instrument and pulling the stops up and down over many years has got rid of whatever friction was holding them up to start with.

Is there a simple solution to this?
Logged
Larry Miller Bon Cajun in C, A/D/G Handry, far too many Hohners and a Streb.

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: My stops won't stop ...
« Reply #1 on: September 03, 2009, 08:42:35 PM »

I asked this question of world renowned concertina maker Colin Dipper.

He reckoned you should pour organic honey down the holes! Honestly!

Anyways, there are a number of things you can do.

High-tech method: drill out and re-bush the holes with nylon bushes.

Slightly less high-tech method: Make a spring from piano wire which presses on some part of the stop slide where they emerge from the reed blocks.

Relatively simple method: Attach a block inside with some sort of friction pad that acts upon the blocks at the top of the slides.

My method: Elastic bands.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: My stops won't stop ...
« Reply #2 on: September 03, 2009, 08:43:12 PM »

Yes, especially embarrasing when you start playing a rousing tune and a weak strangled sound comes out!  I got some pipe end caps, slit them and put them under the stops so it's always got all four going.  Another idea that I never actually tried would be a modification of the guitar capo, the type with an elastic strap.  with blocks rotating on the bar, you could select which voices you want and then fasten the strap.  I did notice that some Chinese made four-stops have the slides the other way so the stops are down to open that voice - far more sensible.

Rees, could this be a mod on Hohners?

Rob.
Logged

Quebecois

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1206
  • Accordez-vous donc, c'est si beau, l'accordéon!
Re: My stops won't stop ...
« Reply #3 on: September 03, 2009, 08:48:29 PM »

Some postings on a Cajun accordion board suggests putting melted reed wax on the posts to help seal them and avoid slippage.

I have seen players on Youtube who use "spacers" which look like wide wooden clothespins... Where to get them, I don't know!

Another suggestion would be to use wooden dowels in which you cut a groove lengthwise, just wide enough to receive the stop rod; slide between the body and the stop knob to keep it extended.
« Last Edit: September 03, 2009, 08:52:41 PM by québécois »
Logged
Hohner Morgane D/G, pre-Erica Hohner in C/F and G/C,
Hohner Erica A/D, Roland FR-18

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: My stops won't stop ...
« Reply #4 on: September 03, 2009, 08:59:47 PM »

Yes, especially embarrasing when you start playing a rousing tune and a weak strangled sound comes out!  I got some pipe end caps, slit them and put them under the stops so it's always got all four going.  Another idea that I never actually tried would be a modification of the guitar capo, the type with an elastic strap.  with blocks rotating on the bar, you could select which voices you want and then fasten the strap.  I did notice that some Chinese made four-stops have the slides the other way so the stops are down to open that voice - far more sensible.

Rees, could this be a mod on Hohners?

Rob.

Trouble is, you can't get the slides out (well you can if you remove the whole top panel of the box - major surgery) so I can't see an easy way to do it.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

HallelujahAl

  • Guest
Re: My stops won't stop ...
« Reply #5 on: September 03, 2009, 09:00:22 PM »

Quote
He reckoned you should pour organic honey down the holes! Honestly!
Really is not such a daft idea. Probably the simplest solution. Melted reed wax would also do the same job, as would a wood glue which could be 'roughed up' with sandpaper after it had dried and set.
Another idea that I had was to get some pipe lagging material (small guage I guess) and cut them down to create the spacers necessary.
AL
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: My stops won't stop ...
« Reply #6 on: September 03, 2009, 09:00:33 PM »

My method: Elastic bands.

Me too!

Mind you when I first played 1 rows many years ago it was de-rigeur to use 4 cloths pegs  

Bananayogi

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 147
Re: My stops won't stop ...
« Reply #7 on: September 03, 2009, 09:01:39 PM »

Thanks for the replies. Not sure I fancy pouring honey on it. Apart from the inevitable stickiness, this summer has been a bugger for wasps!

By default, I link all the stops together with an elastic band in a sort of double figure of eight (if that makes sense!). It keeps them all up, but is highly impractical when the usual 'interested bystander' says "what do those knobs on the top do?" since untangling it seems to take longer than it should.

I quite like the drilling out and putting some sort of nylon/rubber bush in there idea. I will have to investigate to see if I can find something suitable.

Cheers all!
Logged
Larry Miller Bon Cajun in C, A/D/G Handry, far too many Hohners and a Streb.

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: My stops won't stop ...
« Reply #8 on: September 03, 2009, 10:13:20 PM »

I drill them out with a scrid less than 1/4 "  bit
press in 1/4 " maple dowel...
slice flush
Redrill pilot hole
Use torch heated rod and insert to burn hole exact size/ interference fit

I've done this dozens of times and they have all held for decade plus

A litle black felt pen colors the dowel nicely

I bought a brand new HA114 B    that had falling stops... dealer could not fix it... I paid $400  US...
did above mentioned repair and resold it the following day for $650.. still in play by that owner and still in fine condition
Logged

Mike Gott

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 285
  • Melodeon and hairy arm
Re: My stops won't stop ...
« Reply #9 on: September 03, 2009, 11:17:02 PM »

Elastic bands for me, including a spare one in case one of the keyboard or bass springs breaks. There is a ready supply of nice colourful red ones available on most pavements in the Uk thanks to the Royal Mail.

Mike
Logged
"Traditional music was for entertainment, it wasn't for a further education class" (Bob Davenport)

Rivington Morris, Bolton, Lancashire.

ACE

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 535
Re: My stops won't stop ...
« Reply #10 on: September 04, 2009, 08:12:28 AM »

I take it the knobs unscrew, just take them off and slip a very small black O ring on the stem, screw back knob. Job done.
Logged
Paddy Clancy, paddlewheel gob iron cheepo g/d anglo

Malcolm Clapp

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1119
  • Loving my Hohner-reeded wet MMM CastaTommy
Re: My stops won't stop ...
« Reply #11 on: September 04, 2009, 08:33:54 AM »


Tried the O rings, but used red ones, which didn't work. Must try a black one sometime.... >:E >:E >:E
Logged
Tuner/repairer, now retired.

old geezer

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 241
  • Hohner Melodeon
Re: My stops won't stop ...
« Reply #12 on: September 04, 2009, 08:34:30 AM »

some simple home handy-man (engineering) fixed mine

I apologize for the nokia quality, here's an update pic

« Last Edit: September 04, 2009, 11:59:33 AM by old geezer »
Logged
Jack Murphy    beyond the black stump

Bananayogi

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 147
Re: My stops won't stop ...
« Reply #13 on: September 04, 2009, 09:18:39 AM »

I take it the knobs unscrew, just take them off and slip a very small black O ring on the stem, screw back knob. Job done.

OK, so you put the O ring on the stem (yes the knobs unscrew). Push the stop down, the o ring is now at the top of the shaft right under the knob since the body of the box has pushed it there. Pull the stop up. It falls down again.  :-\

Your picture did load OldGeezer, but it's a bit too fuzzy to make out. Can you explain what you did?
Logged
Larry Miller Bon Cajun in C, A/D/G Handry, far too many Hohners and a Streb.

ACE

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 535
Re: My stops won't stop ...
« Reply #14 on: September 04, 2009, 10:37:59 AM »

I take it the knobs unscrew, just take them off and slip a very small black O ring on the stem, screw back knob. Job done.

OK, so you put the O ring on the stem (yes the knobs unscrew). Push the stop down, the o ring is now at the top of the shaft right under the knob since the body of the box has pushed it there. Pull the stop up. It falls down again.  :-\

Ah! I just noticed you do a bit of Cajun, so I will type this slowly so you will not have trouble reading it. ;)
'W h e n  y o u   p u l l  t h e  s t o p s  u p (use bass end fingers) h o l d  t h e  r i n g s  d o w n'  (with the melody end fingers) whoops sorry cajun! (the other hand) ;)
Logged
Paddy Clancy, paddlewheel gob iron cheepo g/d anglo

Bananayogi

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 147
Re: My stops won't stop ...
« Reply #15 on: September 04, 2009, 10:47:38 AM »

I take it the knobs unscrew, just take them off and slip a very small black O ring on the stem, screw back knob. Job done.

OK, so you put the O ring on the stem (yes the knobs unscrew). Push the stop down, the o ring is now at the top of the shaft right under the knob since the body of the box has pushed it there. Pull the stop up. It falls down again.  :-\

Ah! I just noticed you do a bit of Cajun, so I will type this slowly so you will not have trouble reading it. ;)
'W h e n  y o u   p u l l  t h e  s t o p s  u p (use bass end fingers) h o l d  t h e  r i n g s  d o w n'  (with the melody end fingers) whoops sorry cajun! (the other hand) ;)

 ;D ;D ;D ;D

Very f u n n y!

I'd prefer to make them work as they are supposed to rather than some two handed operation - or else I might as well stick to the tried and trusted elastic band!
Logged
Larry Miller Bon Cajun in C, A/D/G Handry, far too many Hohners and a Streb.

ACE

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 535
Re: My stops won't stop ...
« Reply #16 on: September 04, 2009, 11:09:41 AM »

I know what you mean, I like things to work as they should do. They do anti-slip paint for boats etc. I do not know how thick it comes but it might be worth seeing if you could get a tester pot. It will save stripping the box down and radical surgery.
Logged
Paddy Clancy, paddlewheel gob iron cheepo g/d anglo

Bananayogi

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 147
Re: My stops won't stop ...
« Reply #17 on: September 04, 2009, 11:37:02 AM »

Good idea!

Certainly less messy than honey!
Logged
Larry Miller Bon Cajun in C, A/D/G Handry, far too many Hohners and a Streb.

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: My stops won't stop ...
« Reply #18 on: September 04, 2009, 01:02:59 PM »

Good idea!

Certainly less messy than honey!

She was pretty messy last night!
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

HallelujahAl

  • Guest
Re: My stops won't stop ...
« Reply #19 on: September 04, 2009, 01:33:02 PM »

Quote
She was pretty messy last night!
ych-a-fi!
Logged
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal