Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: My first project, a Lovely Old Hohner 3 voice.  (Read 1454 times)

0 Members and 1 Guest are viewing this topic.

fiddleboxdavey

  • Good talker
  • **
  • Offline Offline
  • Posts: 80
  • Castagnari, Vander Aa & impending B.Gaillard C#/Ds
My first project, a Lovely Old Hohner 3 voice.
« on: December 27, 2018, 10:21:11 PM »

Hello folks.
Here’s what is hopefully going to be my first project- a lovely old Hohner 3 voice.
Everything is in really good nick on it apart from the reed leathers, which are all curled over, so they will need replacing. Minimal tarnishing on the reeds and on the whole look in good condition. It’s in B/C
I’d really appreciate some advice as to where to start. I restore violins for a living so there may be some transferable skills somewhere! It’s a good quality box- real MOP buttons and every reed is stamped Hohner, Germany. 
Finding the time Is going to be a challenge but I’ve made it my one and only New Years Resolution!

Many thanks in advance.
Davey.
« Last Edit: December 27, 2018, 11:21:21 PM by fiddleboxdavey »
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: My first project, a Lovely Old Hohner 3 voice.
« Reply #1 on: December 27, 2018, 10:31:31 PM »

You can compress image files on an iPhone by emailing them to yourself and choose one of the smaller size options when you send.  Then when they arrive save them as photos.

The reeds stamped made in Germany are the best that Hohner made, look after them!


Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

fiddleboxdavey

  • Good talker
  • **
  • Offline Offline
  • Posts: 80
  • Castagnari, Vander Aa & impending B.Gaillard C#/Ds
Re: My first project, a Lovely Old Hohner 3 voice.
« Reply #2 on: December 27, 2018, 11:24:19 PM »

Thanks for the info Theo. I’ve managed to upload two photos.
I’ll be really careful with the reeds. If anything other than valve replacement is needing done, I’ll send the box down to you!
Davey
Logged

fiddleboxdavey

  • Good talker
  • **
  • Offline Offline
  • Posts: 80
  • Castagnari, Vander Aa & impending B.Gaillard C#/Ds
Re: My first project, a Lovely Old Hohner 3 voice.
« Reply #3 on: December 27, 2018, 11:37:04 PM »

Is there a good accordion restoration book that anyone could recommend?
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: My first project, a Lovely Old Hohner 3 voice.
« Reply #4 on: December 27, 2018, 11:44:30 PM »

http://accordionrevival.com/ has a lot of useful information buried in a rather wordy format.  Its about piano accordions in the main, but much of the material is applicable.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Pearse Rossa

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 723
Re: My first project, a Lovely Old Hohner 3 voice.
« Reply #5 on: December 28, 2018, 12:31:37 AM »

I’d really appreciate some advice as to where to start.

The wax looks to be well past its best before date, so I would start by removing and cleaning all the reeds.
Clean away all the old wax from the reed blocks.
Then re-valve and re-wax.
That's enough to be getting on with for now and should keep you out of trouble for a while.
Later, you will need to fine tune, sort out leaky gaskets maybe, possibly re-face the pallets.
What is the bass layout? If it's original Hohner layout, it won't be much use for B/C playing.
You will need to sort that out.
The list could get longer, but I would start with the reeds and waxing.
Logged

fiddleboxdavey

  • Good talker
  • **
  • Offline Offline
  • Posts: 80
  • Castagnari, Vander Aa & impending B.Gaillard C#/Ds
Re: My first project, a Lovely Old Hohner 3 voice.
« Reply #6 on: December 28, 2018, 01:17:37 AM »

Thanks Theo & Pearse.
That’s good advice.
I’ll hopefully get started once the Hogmanay gigs are out the way.
I’ll let you know how I get on!
Davey.
Logged

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: My first project, a Lovely Old Hohner 3 voice.
« Reply #7 on: December 29, 2018, 12:23:43 AM »

fiddleboxdavey,

Your accordion looks really nice & is interesting - it's similar to some of the fanciest early "Double Ray" models but lacks the Double Ray stencilling and the black pearl  button (black dot) in the B row.

I've seen a few similar fancy 3 voice BC double ray models with pearl buttons, but unlike yours all of them had the Double Ray stencilling and black dot. And all of the ones I've seen in hand had 21 melody keys - but yours has 23, which I would prefer!

I think Theo has mentioned seeing a 23 button version of the fancy 1930s pearl-button BC in 3 voices, and I think there was one listed for sale on donedeal.ie in County Sligo a couple of years ago that also had 23 buttons.

Thanks to Theo, I also had a 4 voice one that looks even more like yours, a BC with 23 melody keys and no "Double Ray" stencil design (see below).


PG

Edited to add photo of 3 BC Hohners from ca 1930s.  Left: 3 voice MMM with "HOHNER GERMANY" stamped reeds, 21 pearl melody buttons including a "black pearl dot," and Double-Ray stenciling. Middle: compact 3 voice  MMM with zinc plate reeds, black dot button, and double ray stenciling. Right: 4 voice LMMM with "HOHNER GERMANY" stamped reeds and coupler behind keyboard, 23 melody buttons, no Double Ray stenciling and no black dot. Bellows on middle box are unoriginal replacements. Thanks to Theo for the two grey ones.
« Last Edit: December 29, 2018, 03:47:27 AM by pgroff »
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal