Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: 3D Printed Reedblocks  (Read 3572 times)

0 Members and 1 Guest are viewing this topic.

ChrisLDD

  • Good talker
  • **
  • Offline Offline
  • Posts: 64
  • ... but which way is up?
3D Printed Reedblocks
« on: December 29, 2018, 12:04:39 AM »

Just wondering if anyone has tried 3d printing reedblocks...?
Be interested to hear if you have.



Logged
Trying to learn enough magic to make my own melodeon.

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: 3D Printed Reedblocks
« Reply #1 on: December 29, 2018, 09:11:39 AM »

If you can find it, this was dicussed on melnet a few years ago. Probably in the "21st century" thread in this section. I don't remember what conclusions were drawn...
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

Tiposx

  • Durham in England
  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 259
Re: 3D Printed Reedblocks
« Reply #2 on: December 29, 2018, 12:42:07 PM »

Not 3D printed exactly, but Weltmeister are currently producing some lightweight piano accordions (e.g the Rubin model) with plastic reed blocks. They have conventionally waxed on reeds.  They are very popular and sound great on various YouTube videos.

Not sure what they would be like after 80 years or so. My 1936 wooden reed blocks are just fine....
Logged

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: 3D Printed Reedblocks
« Reply #3 on: December 29, 2018, 02:44:55 PM »

The Welty reed blocks are injection moulded and in some cases enable interesting V shaped blocks and air chimneys. They also use foam gaskets and these can decay and or make it hard to remove blocks because the gasket has morphed over time into a sort of rudimentary glue.
I remember (one of )the thread (s) about printing Reed blocks. Printers work by creating layers and it was thought to be tricky and or expensive to achieve. Laser/cnc cutters is the way to go (it seems) and is commonly used by makers. There is a vid also of someone (from Melnet) making a reed block by cnc‘inn thin plywood and then gluing the layers together.

John MacKenzie (Cugiok)

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2360
  • Fettling... Learning to reed and right.
Re: 3D Printed Reedblocks
« Reply #4 on: December 29, 2018, 02:54:58 PM »

Logged
There is no beginning to my talent :)



: Hohner Club Modell 1. Bb/Eb, de-clubbed : Early Hohner Pressed Wood A/D : 1930's Varnished wood G/C:  Hohner Erika C/F: Bandoneon tuned D/G Pressed wood: Koch F/Bb; G/C Pre Corso

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: 3D Printed Reedblocks
« Reply #5 on: December 29, 2018, 04:30:26 PM »

https://www.youtube.com/watch?v=6qAaNlVZHnw

Our old friend Diatonix

Yes, but that's laser cutting, not 3D printing.
Should be a good method to make nice stable blocks though.
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: 3D Printed Reedblocks
« Reply #6 on: December 29, 2018, 07:15:16 PM »

Yes, but that's laser cutting, not 3D printing.
Should be a good method to make nice stable blocks though.

As alluded to by Roger in the previous post:

There is a vid also of someone (from Melnet) making a reed block by cnc‘inn thin plywood and then gluing the layers together.

That's of course if you call a laser a CNC machine. I suppose it is to be fair, I think of a lathe or milling machine when CNC is mentioned, but that refers to the control of the machine, not the cutting/tooling involved? I'm more than happy to be corrected here!
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: 3D Printed Reedblocks
« Reply #7 on: December 29, 2018, 07:54:16 PM »

CNC = Computer Numerical Control, so just as applicable to lasers as to cutters.

As alluded to by Roger in the previous post:

Yes, sorry -  I missed that.
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: 3D Printed Reedblocks
« Reply #8 on: December 29, 2018, 08:51:12 PM »

I can't really see the point. Reed blocks are pretty simple assemblies.
I've come to Melnet as I retire, but I could have knocked up dozens of these jobbies while I still had the workshop.
Even so, given a half decent table saw in my garage, I reckon I could make these at a decent rate.
How do you prepare the materials before you get to the CNC or laser anyway? A 3d printer needs the right sized materials to work on.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

ChrisLDD

  • Good talker
  • **
  • Offline Offline
  • Posts: 64
  • ... but which way is up?
Re: 3D Printed Reedblocks
« Reply #9 on: December 29, 2018, 10:10:03 PM »

My first test print (4 chambers of a bass end reed block).

From idea to reality with just a few button presses - I am astonished!
Logged
Trying to learn enough magic to make my own melodeon.

John MacKenzie (Cugiok)

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2360
  • Fettling... Learning to reed and right.
Re: 3D Printed Reedblocks
« Reply #10 on: December 29, 2018, 10:14:55 PM »

Very interesting indeed  ChrisLDD

SJ
Logged
There is no beginning to my talent :)



: Hohner Club Modell 1. Bb/Eb, de-clubbed : Early Hohner Pressed Wood A/D : 1930's Varnished wood G/C:  Hohner Erika C/F: Bandoneon tuned D/G Pressed wood: Koch F/Bb; G/C Pre Corso

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: 3D Printed Reedblocks
« Reply #11 on: December 30, 2018, 12:05:02 AM »

What will the raw material cost for a full set Chris ? is the raw filament and heating cost significant ??
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

ChrisLDD

  • Good talker
  • **
  • Offline Offline
  • Posts: 64
  • ... but which way is up?
Re: 3D Printed Reedblocks
« Reply #12 on: December 31, 2018, 03:39:16 PM »

What will the raw material cost for a full set Chris ? is the raw filament and heating cost significant ??

Attached is a pic. of the bass reed-block.
It weighs 67g with an additional 14g used for the raft upon which it was printed.

The cost of a 1kg reel of PLA filament is about £20, so the material cost works out at just over £1.60.
However, this print took 16 hours 17 minutes to complete!

Logged
Trying to learn enough magic to make my own melodeon.

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: 3D Printed Reedblocks
« Reply #13 on: December 31, 2018, 03:47:34 PM »

The problem with using "consumer" 3D printers for reed blocks (the type that builds up from melted plastic filament) is that the resulting material has none of the desirable properties for reed blocks -- it's weaker and less stiff than wood.

One of the "professional" 3D printers which uses sintered metal would be another kettle of fish entirely, as would be the cost -- it would be much cheaper and quicker to get them CNC-milled out of solid aluminium, which I seem to remember somebody (ChrisLDD?) trying.

Melted-filament 3D printers are essentially a way of spending several hundred pounds to make fascinating roughly-finished weak plastic gewgaws worth a few tens of pence...
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

ChrisLDD

  • Good talker
  • **
  • Offline Offline
  • Posts: 64
  • ... but which way is up?
Re: 3D Printed Reedblocks
« Reply #14 on: December 31, 2018, 04:09:13 PM »

The problem with using "consumer" 3D printers for reed blocks (the type that builds up from melted plastic filament) is that the resulting material has none of the desirable properties for reed blocks -- it's weaker and less stiff than wood.


I was of the same opinion … right up until I did the first print.
Even with the standard PLA plastic, the result is surprisingly robust (Quick test: dropped a previous print 10 times from a from a height of 1 metre onto a concrete floor … it's so light it just bounces!)


I would imagine that an ABS filament would be even stronger, but I haven't tried it.







 
Logged
Trying to learn enough magic to make my own melodeon.

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: 3D Printed Reedblocks
« Reply #15 on: December 31, 2018, 04:15:44 PM »

The problem with using "consumer" 3D printers for reed blocks (the type that builds up from melted plastic filament) is that the resulting material has none of the desirable properties for reed blocks -- it's weaker and less stiff than wood.


I was of the same opinion … right up until I did the first print.
Even with the standard PLA plastic, the result is surprisingly robust (Quick test: dropped a previous print 10 times from a from a height of 1 metre onto a concrete floor … it's so light it just bounces!)


I would imagine that an ABS filament would be even stronger, but I haven't tried it.

PLA is light, but it's certainly not strong or stiff in comparison with wood (neither is ABS) -- go and look up the material properties if you don't believe me, or try twisting one of the blocks and see how much stiffer a wood one is. Almost all non-composite (non-fibre-filled) plastic materials have the same problem -- wood has surprisingly good properties, or maybe not so surprising if you consider the millions of years of evolution that went into it...
« Last Edit: December 31, 2018, 04:30:52 PM by IanD »
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: 3D Printed Reedblocks
« Reply #16 on: December 31, 2018, 04:20:51 PM »

Quote
However, this print took 16 hours 17 minutes to complete!
:o :o :o

Jesse Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 761
  • Buffalo, NY, USA
Re: 3D Printed Reedblocks
« Reply #17 on: December 31, 2018, 04:30:03 PM »

Obviously, there are so few accordion players in the grand scheme of things that this probably is just a tiny drop in the ocean, but I am generally biased to prefer natural, decomposable materials rather than plastic that will sit in a landfill for all eternity.

A more practical question that comes to mind is whether this will adhere to wax as well as a wood reed block, or if you would use something else to affix the reed plates to the block.
Logged
Hohner Pokerwork D/G (x2!), Hohner one row four stops in D and C, Hohner Presswood C/F.

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: 3D Printed Reedblocks
« Reply #18 on: December 31, 2018, 04:34:27 PM »

Obviously, there are so few accordion players in the grand scheme of things that this probably is just a tiny drop in the ocean, but I am generally biased to prefer natural, decomposable materials rather than plastic that will sit in a landfill for all eternity.

A more practical question that comes to mind is whether this will adhere to wax as well as a wood reed block, or if you would use something else to affix the reed plates to the block.

I'm sure ChrisLDD can confirm, but I expect wax won't stick very well to plastic. And you probably can't use screws or pins, PLA and ABS aren't really strong enough to take them without splitting.

You might have more success making reed blocks out of a well-matured Cheddar ;-)
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

ChrisLDD

  • Good talker
  • **
  • Offline Offline
  • Posts: 64
  • ... but which way is up?
Re: 3D Printed Reedblocks
« Reply #19 on: December 31, 2018, 04:51:23 PM »


PLA is light, but it's certainly not strong or stiff in comparison with wood (neither is ABS) -- go and look up the material properties if you don't believe me, or try twisting one of the blocks and see how much stiffer a wood one is. Almost all non-composite (non-fibre-filled) plastic materials have the same problem -- wood has suprisingly good properties, or maybe not so surprising if you consider the millions of years of evolution that went into it...

I would certainly agree that the PLA would not come off as well in a 'twist-test', but I don't expect the reed-blocks in an accordion to be subjected to that sort of stress … and I don't believe that that's the whole story as to what would make something sound good.

I have a number of empty reed-blocks lying around my desk that I keep for reference, some wood, some aluminium, and now some plastic. They each have their own unique characteristics and associated sound.

My experience so far, is that the reeds I've fitted into the PLA reed-block sound surprisingly good.
And, oh yes ... prototyping is now a doddle!
Logged
Trying to learn enough magic to make my own melodeon.
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal