Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Which reed to ping?  (Read 956 times)

0 Members and 1 Guest are viewing this topic.

Boxhead

  • Good talker
  • **
  • Offline Offline
  • Posts: 59
Which reed to ping?
« on: January 07, 2019, 11:05:23 AM »

 Hello everyone and a Happy New Year to you all.

Question from a complete ignoramus here!

On my friend's b/c box the top B on the inner row has stopped sounding, it's on the highest key on the inner row, on the pull. The push note is fine. I would like to try pinging the reed before I send it off for what could be a costly repair. My question is,  exactly which reed on the block would I need to do this on? I don't really understand which reeds work on the pull and which work on the push and which reeds correspond to which buttons. I have noticed the last reed on the block appears to appears to be very flush with it's groove and there appears to be no edge on the reed tip which is proud enough to ping, could this be the problem?

Thanks in advance for any replies

Boxhead
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Which reed to ping?
« Reply #1 on: January 07, 2019, 11:17:59 AM »

No, if it's a pull reed that is not sounding it is the one on the underside of the reed plate that may be hidden by a valve.   The very small reeds for the highest notes can have no visible gap. That is important for good reed response.

If it's the highest note on the inner row then you need to be looking at the end reed on the shorter reed block.  And if it is a 2 voice box there will two reeds to check, one on each side of the block, and on the underside of the reed plate.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Boxhead

  • Good talker
  • **
  • Offline Offline
  • Posts: 59
Re: Which reed to ping?
« Reply #2 on: January 07, 2019, 11:42:54 AM »

Thanks so much Theo, It worked! I am back in Mrs Boxhead's good books, she didn't quite trust me fiddling around with her instrument, now I think she is convinced! (:) There seemed to be a lot of clearance on that reed compared to the others on the row, so I pinged it and moved it to be very slightly more flush. With the information you gave me I could tell I was pinging the right reed because it corresponded with the sound of the B on the piano keyboard. Nice one.

Boxhead
Logged

Cam Button

  • Good talker
  • **
  • Offline Offline
  • Posts: 65
Re: Which reed to ping?
« Reply #3 on: February 10, 2019, 10:56:59 PM »

Thank you. A5 sounds now.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal