Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Best adhesive?: 1930s pearl buttons to wood button stems  (Read 1818 times)

0 Members and 1 Guest are viewing this topic.

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Best adhesive?: 1930s pearl buttons to wood button stems
« on: January 18, 2019, 02:47:36 PM »

Hi all,

I'd be interested to learn and share best practices (and especially best products) for gluing pearl accordion buttons to wood button stems. I've used various adhesives in the past but always wonder what has worked best for others.

Thanks,

Paul Groff
« Last Edit: January 18, 2019, 09:26:00 PM by pgroff »
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Best adhesive?: 1930s pearl buttons to wood button stems
« Reply #1 on: January 18, 2019, 04:14:23 PM »

Araldite is what I use, as taught by Emmanuel Pariselle.
Apply to button, place on lever and give it a little twist to spread the glue about. DO NOT CLAMP!
I usually rough up the surfaces before glueing.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Best adhesive?: 1930s pearl buttons to wood button stems
« Reply #2 on: January 18, 2019, 08:27:31 PM »

On the bandoneon chemnitzer concertinas I’ve worked on, the buttons are glued to levers with animal glue. In fact the chemnitzer was mostly held together with animal glue.

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: Best adhesive?: 1930s pearl buttons to wood button stems
« Reply #3 on: January 18, 2019, 09:24:59 PM »

Thanks all! 

I do see araldite recommended often (I think this is what we call "epoxy" in the US, usually made by mixing 2 components). I worry about its use in a historical instrument where reversibility is usually valued.

Animal glue was certainly used in some of the original instruments and is very reversible. But accordion buttons are often torqued sideways in some styles of playing, not always depressed directly downward, and I tend to think that animal glue ("hide glue") has little shear strength. That's why it's used where reversibiity is important.

Cyanoacrylate ("super glue") is often used by luthiers for pearl inlay etc and is somewhat reversible using acetone or special solvents to dissolve the adhesive.

Various contact cements have been recommended too.

I've tried most of these!  Most have worked but again I'm hoping to learn from others' experiences if there were any superstar adhesives or some that later turned out to be a problem.

In any case, little pegs or screws set into the underside of the pearl button seem important for best results, and most (but not all) of the 1930s pearl buttons have those.

Should have mentioned that I'm not so worried about gluing the pearl buttons that have a screw coming right through the button and visible from the top. I do glue those but I'm sure animal glue is enough since there is a strong screwed connection.

PG
« Last Edit: January 18, 2019, 09:28:07 PM by pgroff »
Logged

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: Best adhesive?: 1930s pearl buttons to wood button stems
« Reply #4 on: January 18, 2019, 09:39:59 PM »

Araldite is an epoxy resin- UK brand name- sold in small packs.

Animal glue- what exactly is it and where can you get it from? (in UK or Ireland)
Logged

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Best adhesive?: 1930s pearl buttons to wood button stems
« Reply #5 on: January 18, 2019, 09:48:29 PM »

Araldite is an epoxy resin- UK brand name- sold in small packs.

Animal glue- what exactly is it and where can you get it from? (in UK or Ireland)
Animal glue is called pearl glue. It's supplied as tiny "pearls" about the size of lentils. There's loads available on eBay and any cabinet suppliers will sell it. Heat it in a double boiler with some water.
YouTube will be your friend here.
Sometimes known as hot glue. (As opposed to hot melt glue)
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Stockaryd

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 255
Re: Best adhesive?: 1930s pearl buttons to wood button stems
« Reply #6 on: January 18, 2019, 11:03:03 PM »

. . . Or hide glue.  Or fish glue.  All comes in pearls,  -  so pearl glue is a good name.

50%   pearls - 50% water,  wait for a few hours. Then gently warm up.

  (I warm it in a microwave for 5 - 10 seconds, (but do NOT tell anyone,)  -  if it is not warm enough - 5 seconds more )

I use a small ceramic egg-cup. And a watercolour brush. 
Logged
Hohner Corso, Hohner Erica, Emmanuel Pariselle, Gessner,   Koch,   Mariotti,    "China  NoName",   4 Toy,     -and now some more

Psuggmog Volbenz

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 318
    • musical whimsy
Re: Best adhesive?: 1930s pearl buttons to wood button stems
« Reply #7 on: January 19, 2019, 07:02:43 AM »

My first choice in this context, would be hot hide glue. However, all hide glue is not created equal. Pearl sized glue pellets is only one of many forms the glue comes on, often used  in this shape by traditional furniture makers. The glue I use is more the size of grains of sand, in its dry form. The ratio of water to glue drastically influences glue strength. One of the advantages of properly applied hide glue is that it doesn't "creep" under load, unlike alphatic resin glues. Hide glue is not a good gap filling adhesive and thus poorly suited to dirty, sloppy or imprecise fit ups. Hot glue joints can be very strong if applied properly, but there is a very narrow "time-temperature" window; approximately 90 secs before the hot glue begans to gel and fails to bond properly. Hot hide glue applied to clean glass and forcibly removed, can cause to glass to chip before glue glue bond fails. Good technique and attention to detail is required, but for some applications, there is still no better adhesive. If you were using plastic buttons, I would choose some other adhesive.
Logged
I'm squeezin' and they're wheezin': old junker boxes

Psuggmog Volbenz

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 318
    • musical whimsy
Re: Best adhesive?: 1930s pearl buttons to wood button stems
« Reply #8 on: January 19, 2019, 07:07:15 AM »

My preference, when repairing vintage instruments, is to use the same materials used when the instrument was created. When making an instrument inspired by a vintage instrument, I use whatever seems to be the best suited to the modern techniques and materials involved.
Logged
I'm squeezin' and they're wheezin': old junker boxes

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Best adhesive?: 1930s pearl buttons to wood button stems
« Reply #9 on: January 19, 2019, 08:35:11 AM »

Animal glues would have been used on all of the buttons originally on vintage instruments and their present condition often demonstrates that the bond may last a century or so.  I also prefer to use the original type of adhesive.  Recently I’ve been using fish glue for small repairs and find it very convenient.  I’ve used it to replace bone buttons with good results.  It has the advantage of not requiring heat, and has a longer open time.  Like other protein glues it is reversible with heat and moisture.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Psuggmog Volbenz

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 318
    • musical whimsy
Re: Best adhesive?: 1930s pearl buttons to wood button stems
« Reply #10 on: January 20, 2019, 09:26:47 AM »

I keep a bottle of fish glue in my refrigerator and small batches of hydrated hide glue in the freezer. The rest of my hide glue is keep dry in sealed metal canisters. The frozen portions are kept in old plastic 35mm film canisters and quickly thawed in a microwave oven.
Logged
I'm squeezin' and they're wheezin': old junker boxes

Stockaryd

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 255
Re: Best adhesive?: 1930s pearl buttons to wood button stems
« Reply #11 on: January 20, 2019, 02:43:28 PM »

Pugmog Volbenz,  You are the first.

 I have just tried to save hide glue in a freezer for four months. When I tested the glue, the hide glue worked perfectly.
If/when I have it in the fridge then it can become mold after 3 weeks.

 I save it in small glass jars with metal lid.
Logged
Hohner Corso, Hohner Erica, Emmanuel Pariselle, Gessner,   Koch,   Mariotti,    "China  NoName",   4 Toy,     -and now some more

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Best adhesive?: 1930s pearl buttons to wood button stems
« Reply #12 on: January 21, 2019, 09:50:31 AM »

Adding a few Thymol crystals will stop the mould.
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal