Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Thumb & Bass strap adjustment/replacement  (Read 3240 times)

0 Members and 1 Guest are viewing this topic.

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Thumb & Bass strap adjustment/replacement
« on: January 28, 2019, 09:24:35 PM »

A bit of advice needed...

1) Thumb-strap: One of my Hohners has what is obviously a replacement thumbstrap, neatly done and fixed with a shiny new rivet but made of artificial leather. The edge of the strap rapidly cut into my thumb. I have removed the strap and put on a soft leather substitute, button holed and slipped over the rivet head, but it keeps coming off....

So how do I remove the rivet to do the job from scratch?

2) Bass strap-The bass strap as fitted to my Hohner 1040 leaves a lot of wriggle room for my left hand this makes it difficult to rapidly switch from bellows push to pull.
Is the standard solution to shorten the strap so it touches the back of my hand?

Answers on a post-card please
Logged

ju

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 174
Re: Thumb & Bass strap adjustment/replacement
« Reply #1 on: January 28, 2019, 10:01:34 PM »

I just cut off my rivet and fitted a new strap with a bolt and washers and locking nut . Not pretty but works well . Just take the keyboard off and cut rivet from the inside with some sharp nose pliers.
« Last Edit: January 28, 2019, 10:06:53 PM by ju »
Logged

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Thumb & Bass strap adjustment/replacement
« Reply #2 on: January 28, 2019, 10:44:15 PM »

A bit of advice needed...

2) Bass strap-The bass strap as fitted to my Hohner 1040 leaves a lot of wriggle room for my left hand this makes it difficult to rapidly switch from bellows push to pull.
Is the standard solution to shorten the strap so it touches the back of my hand?


Could you fit something like this?

http://www.cgmmusical.co.uk/CGM_Musical_Services/Bass_Straps.html#23
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Thumb & Bass strap adjustment/replacement
« Reply #3 on: January 29, 2019, 07:59:52 AM »

To adjust the bass strap, just undo the bottom fixing and make new screw holes a short distance away from the existing ones and refit. I emphasis the 'short distance' bit as the effect of the reduction in length is more than you may think.

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Thumb & Bass strap adjustment/replacement
« Reply #4 on: January 29, 2019, 08:48:09 AM »

Just to add to Lester's answer - the new screw holes should be made in the leather strap, not in the wooden casework of the box (as I have sometimes come across :'( )
Shifting the screw holes even just 5 mm can make a noticeable difference.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: Thumb & Bass strap adjustment/replacement
« Reply #5 on: January 29, 2019, 10:12:52 PM »

Thanks for all the answers...Done the bass strap. Took it in 5mm twice and it feels a lot better- the previous owner obviously had bigger paws than me. Steve's advice was well timed- I renewed a bass strap on a Casali PA last year and found two sets of screw holes under one end...I nearly learnt by example.
Peadar
Logged

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Thumb & Bass strap adjustment/replacement
« Reply #6 on: January 30, 2019, 06:45:38 AM »

My standard fix is to replace the rivet with a T-nut glued in place from the inside of the keyboard.
https://www.albanycountyfasteners.com/T-Nuts-s/414.htm

You can bend off the prongs so it sits flat inside the keyboard.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: Thumb & Bass strap adjustment/replacement
« Reply #7 on: April 07, 2019, 08:05:25 PM »

Back to the Bass Strap...
Replaced the (perished) rubberised canvas bass strap on the Antoria growl box with a leather one... Will need to slacken it off I think. Holds my hand really securely- so securely I can work neither the air  valve nor the bass buttons.

Hmm.
Logged

Jesse Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 761
  • Buffalo, NY, USA
Re: Thumb & Bass strap adjustment/replacement
« Reply #8 on: April 07, 2019, 08:29:03 PM »

Aside adjusting the length of the bass strap, you may find that experimenting with different hand positions will help. If you kind of curve your hand like you are cupping a ball it will increase the tension against the strap.
Logged
Hohner Pokerwork D/G (x2!), Hohner one row four stops in D and C, Hohner Presswood C/F.

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Thumb & Bass strap adjustment/replacement
« Reply #9 on: April 08, 2019, 12:02:41 PM »

If your box is equipped with the usual pair of shoulder straps you don't need a thumb strap.
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Thumb & Bass strap adjustment/replacement
« Reply #10 on: April 08, 2019, 12:05:37 PM »


If your box is equipped with the usual pair of shoulder straps you don't need a thumb strap.

No you have pair of shoulder straps don't need a thumb strap but you may chose to use one.
Also you don't need a thumb strap if you only use a single shoulder strap but you may choose to use one.

Mark Leue

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 175
Re: Thumb & Bass strap adjustment/replacement
« Reply #11 on: April 08, 2019, 01:40:06 PM »

I find myself using different hand positions when playing faster cross row passages than using a thumb strap would allow, but that's just me. I watched a good player the other day who does use a thumb strap, and I noticed that his Castagnari thumb strap was on a one fastener pivot, which allowed a lot better access to the keyboard length then you can get on the hand trapping Hohner ones.
Logged

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: Thumb & Bass strap adjustment/replacement
« Reply #12 on: April 08, 2019, 09:31:01 PM »

If your box is equipped with the usual pair of shoulder straps you don't need a thumb strap.

I am not sure that shoulder straps where common at the time boxes were still being labelled " Made in Saxony". Just a bit reluctant to fix the brackets on the old lady.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal