Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Refurb of Hohner 3515 - advice requested  (Read 1909 times)

0 Members and 1 Guest are viewing this topic.

Alyn Iorwerth

  • Member
  • *
  • Offline Offline
  • Posts: 13
Refurb of Hohner 3515 - advice requested
« on: January 29, 2019, 10:26:40 AM »

First of all, thanks to those who identified my old Hohner box for me on another thread.
 
This instrument features a metal fingerplate on the treble end. Having refaced the treble pallets and adjusted the button height by careful bending of the levers, the buttons are rubbing on the sides of the holes in the fingerplate. I don't think that more bending will help very much - there is less than 1mm sideways clearance, which seems very tight when the levers can flex sideways when playing. There is sign of ancient wear on the buttons, which makes me think it's not a new problem.

The holes are oval, not circular, and on the underside, they have a lip. So they are not just drilled through the plate, but must have been formed on some sort of press.

Has anyone else encountered this problem, and how did you solve it?

Thank you
Alyn
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Refurb of Hohner 3515 - advice requested
« Reply #1 on: January 29, 2019, 10:32:07 AM »

Yes I have had to deal with that in every old Hohner I’ve worked on. The only way I’ve found is to bend the levers sideways to get the buttons centralised in the holes. It is important and it takes quite a long time to get it right.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

John MacKenzie (Cugiok)

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2360
  • Fettling... Learning to reed and right.
Re: Refurb of Hohner 3515 - advice requested
« Reply #2 on: January 29, 2019, 11:21:04 AM »

Ideally one would get all the button adjustments done before final fixing of the pallets, glue/wax whatever.  What I do is put the face plate on, then mark each button with an arrow, in pencil, pointing in the direction it needs to go to be central in the hole. I can sort of gauge when they are nearly right, just by looking at them before putting the face plate back, as they will be equidistant one from another.

Sir John
Logged
There is no beginning to my talent :)



: Hohner Club Modell 1. Bb/Eb, de-clubbed : Early Hohner Pressed Wood A/D : 1930's Varnished wood G/C:  Hohner Erika C/F: Bandoneon tuned D/G Pressed wood: Koch F/Bb; G/C Pre Corso

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Refurb of Hohner 3515 - advice requested
« Reply #3 on: January 29, 2019, 11:43:37 AM »

Ideally one would get all the button adjustments done before final fixing of the pallets, glue/wax whatever. 


I would 100% disagree with adjusting the buttons prior to fixing the pallets as I find that refitting the pallets invariably will cause the button placement to change especially if fitting thicker pallet facings. So, in my world, I alway completely finish the mechanism refurb prior to adjusting the button spacing.
YMMV

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Refurb of Hohner 3515 - advice requested
« Reply #4 on: January 29, 2019, 11:46:46 AM »

I agree with Lester on this.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Refurb of Hohner 3515 - advice requested
« Reply #5 on: January 29, 2019, 11:48:19 AM »

I agree with Lester on this.
Me too.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Refurb of Hohner 3515 - advice requested
« Reply #6 on: January 29, 2019, 11:53:53 AM »

Ditto.

And with a removable top keyboard it is a bit easier.   Fix the keyboard in place, but don't fasten the top on. place the top in position, then work on one button at a time.  Make adjustment, replace top and check, repeat until central.  Then repeat for the other buttons.  Then screw the top plate on and check again that all the buttons are central.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

John MacKenzie (Cugiok)

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2360
  • Fettling... Learning to reed and right.
Re: Refurb of Hohner 3515 - advice requested
« Reply #7 on: January 29, 2019, 12:35:22 PM »

What I meant was before final fixing of the refaced pallets to the levers. Everything in place, just not glued. Sorry if that was badly explained.

SJ
Logged
There is no beginning to my talent :)



: Hohner Club Modell 1. Bb/Eb, de-clubbed : Early Hohner Pressed Wood A/D : 1930's Varnished wood G/C:  Hohner Erika C/F: Bandoneon tuned D/G Pressed wood: Koch F/Bb; G/C Pre Corso

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Refurb of Hohner 3515 - advice requested
« Reply #8 on: January 29, 2019, 12:46:01 PM »

What I meant was before final fixing of the refaced pallets to the levers. Everything in place, just not glued. Sorry if that was badly explained.

SJ


Still disagree, everything in place and glued down as any disturbance can cause button offset.

John MacKenzie (Cugiok)

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2360
  • Fettling... Learning to reed and right.
Re: Refurb of Hohner 3515 - advice requested
« Reply #9 on: January 29, 2019, 12:48:43 PM »

Fine ;)

SJ
Logged
There is no beginning to my talent :)



: Hohner Club Modell 1. Bb/Eb, de-clubbed : Early Hohner Pressed Wood A/D : 1930's Varnished wood G/C:  Hohner Erika C/F: Bandoneon tuned D/G Pressed wood: Koch F/Bb; G/C Pre Corso

Alyn Iorwerth

  • Member
  • *
  • Offline Offline
  • Posts: 13
Re: Refurb of Hohner 3515 - advice requested
« Reply #10 on: January 29, 2019, 04:55:54 PM »

Many thanks for all the responses.
I've had a further session gently bending the levers sideways, but I also did a couple of other things first:
1. I thoroughly cleaned the holes with a small file to remove any rust, and waxed the metal to counteract any friction.
2. With a small pair of pliers I bent the flange around the back of each hole to slightly widen the hole (I'm not sure that I made much impact, but I felt better afterwards).
The action is now as smooth and quiet as I could wish for.

On to the bass end now ...

Alyn 
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal