Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 2 [3]   Go Down

Author Topic: Converting a two row to a one row  (Read 9233 times)

0 Members and 1 Guest are viewing this topic.

Pearse Rossa

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 723
Re: Converting a two row to a one row
« Reply #40 on: February 21, 2020, 12:42:25 AM »

Thank you baz, Steve and boxcall. I am genuinely humbled by your kind comments.

Quote
I don’t see anything about what you used for reeds
I used a new set of dural quality, LMMH reeds in the key of D, sourced from Fratton Accordions.
They're not bad at all, but next time I think I will go a grade better.
For the left-hand chords, I used spare reeds that were knocking about the place.
I made up the bass as well but opted not to install them (for now at least).
I wanted to keep the instrument as light as possible, and besides, I don't think they added much to the 4-voice mix.
I just came across your own project recently boxcall, and read it with great interest. Well done there.
Actually, you might be able to help me out if you don't mind. I would be interested to know what the degree
of tremolo is on the MM reeds in your Beltuna.
Indeed, if anyone reading this can offer advice on that, I would appreciate it.
« Last Edit: February 21, 2020, 02:47:02 AM by Pearse Rossa »
Logged

Pearse Rossa

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 723
Re: Converting a two row to a one row
« Reply #41 on: February 22, 2020, 03:50:13 PM »

Yesterday I repadded the pallets.

I wanted to acknowledge Lester's excellent tutorial "Hot Rod a Hohner Episode 2 - Reface Treble Pallets".
As this was a task I had never performed previously, this video proved invaluable.
So, here's to Lester.
Logged

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Converting a two row to a one row
« Reply #42 on: February 22, 2020, 04:29:25 PM »

Thank you baz, Steve and boxcall. I am genuinely humbled by your kind comments.

Quote
I don’t see anything about what you used for reeds
I used a new set of dural quality, LMMH reeds in the key of D, sourced from Fratton Accordions.
They're not bad at all, but next time I think I will go a grade better.
For the left-hand chords, I used spare reeds that were knocking about the place.
I made up the bass as well but opted not to install them (for now at least).
I wanted to keep the instrument as light as possible, and besides, I don't think they added much to the 4-voice mix.
I just came across your own project recently boxcall, and read it with great interest. Well done there.
Actually, you might be able to help me out if you don't mind. I would be interested to know what the degree
of tremolo is on the MM reeds in your Beltuna.
Indeed, if anyone reading this can offer advice on that, I would appreciate it.
Mine is around + 8 or + 9 ish on the +M reeds , while doing this check I’ve noticed a few spots where its drifted M reeds being a little sharp.

On a picture I have save of Triskel’s ( Acadian) its plus 7.5 on one M and minus 7.5 on the other M reeds.
Dedic tuning which might be better for a box with no stops, ?

Same amount of tremolo approx. but the latter will be on pitch .
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Converting a two row to a one row
« Reply #43 on: February 22, 2020, 05:32:52 PM »

I’ve owned two Beltuna 4-stops. The first was in D (no longer in my possession) and I remember it being tuned 440-442 (the M+ reeds obviously being tuned to 442). I currently have one in the key of G that was originally 440-441 but I’ve since tuned it up to 440-442.

Matt
Logged
C#/D player

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Converting a two row to a one row
« Reply #44 on: February 22, 2020, 06:18:35 PM »

Quote
On a picture I have save of Triskel’s ( Acadian) its plus 7.5 on one M and minus 7.5 on the other M reeds.
Dedic tuning which might be better for a box with no stops, ?

As I recall, Triskel had specifically requested stronger tremolo than normal.  My Acadian is marked +5/-5 inside, which is more typical of the 'Quebecois tuning' used by Marc Savoy.  Incidentally, the box sounds fine on LM-H and LM+H settings, maybe thanks to the moderate offsets.

I was working on a Messervier last week and that one had M voices tuned nominally 0/+10.  Nice sound too.

This week it's a Morelli I have on the bench.  This one is 0/+20 (more tremolo than my ears like..).
Logged

Pearse Rossa

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 723
Re: Converting a two row to a one row
« Reply #45 on: February 22, 2020, 10:36:10 PM »

Thanks for the replies fellas. That information is very useful to me.
Logged

richard.fleming

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 556
Re: Converting a two row to a one row
« Reply #46 on: February 23, 2020, 10:18:46 AM »

but here's a wee tune.


Not an obvious choice of tune for a one-row..
Logged
Old Paolo Sopranis in C#/D and D/D#

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Converting a two row to a one row
« Reply #47 on: February 23, 2020, 01:49:39 PM »

"Not an obvious choice of tune for a one-row.."

Please forgive my usual ignorance; but "Why not?"
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Converting a two row to a one row
« Reply #48 on: February 23, 2020, 02:44:07 PM »

"Not an obvious choice of tune for a one-row.."

Please forgive my usual ignorance; but "Why not?"

Indeed.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Pearse Rossa

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 723
Logged

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: Converting a two row to a one row
« Reply #50 on: February 23, 2020, 10:14:41 PM »

Pearse ,

Showing my ignorance, but as a matter of interest what was your "wee tune"?

P
Logged

MikeK

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 354
Re: Converting a two row to a one row
« Reply #51 on: February 23, 2020, 10:26:24 PM »

On youtube it shows the title as   When The Tide Comes In
Logged
I always respect my elders but they are getting fewer in numbers.

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Converting a two row to a one row
« Reply #52 on: February 23, 2020, 10:49:44 PM »

I’ve owned two Beltuna 4-stops. The first was in D (no longer in my possession) and I remember it being tuned 440-442 (the M+ reeds obviously being tuned to 442). I currently have one in the key of G that was originally 440-441 but I’ve since tuned it up to 440-442.

Matt
That’s what mine is using Hz 440- 442 but as I said a few notes M reeds have gone up in pitch
The A note being the worst , time for a check up I guess.

Do reeds tend to go sharp rather then flat over time?
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

Pearse Rossa

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 723
Re: Converting a two row to a one row
« Reply #53 on: February 24, 2020, 12:10:44 AM »

Pearse ,
Showing my ignorance, but as a matter of interest what was your "wee tune"?
P
On youtube it shows the title as   When The Tide Comes In

The tune is known by several different titles. I choose to call it "When the tide comes in" because it's my favourite title, and I live right beside the sea.
Logged

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: Converting a two row to a one row
« Reply #54 on: February 24, 2020, 09:12:52 PM »

Pearse ,
Showing my ignorance, but as a matter of interest what was your "wee tune"?
P
On youtube it shows the title as   When The Tide Comes In

The tune is known by several different titles. I choose to call it "When the tide comes in" because it's my favourite title, and I live right beside the sea.

Thanks.
Remiss of me not to have seen the title on you tube...but the way my internet is at the moment it was a small miracle I managed to view it at all.
Logged
Pages: 1 2 [3]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal