Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2 3   Go Down

Author Topic: Varnishing the inside?  (Read 6017 times)

0 Members and 1 Guest are viewing this topic.

rileycat

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 429
Varnishing the inside?
« on: February 01, 2019, 06:44:46 PM »

A friend has told  me that he varnished the inside of his Hohner and it made a noticeable improvement to the tone. Not sure what to  think. He lives away so  I can't verify this opinion. Has anyone else tried this? Might it work, any thoughts folks?
Logged

Henry Piper

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 368
Re: Varnishing the inside?
« Reply #1 on: February 01, 2019, 07:22:54 PM »

Some people varnish the insides of drumshells, claiming it improves focus and tone projection,...   whether its true or just a "perceived" improvement I'm unsure, others more expert than me will doubtless be along soon to advise you whether it might work on melodeons.
« Last Edit: February 02, 2019, 10:35:41 AM by Henry Piper »
Logged
From Ottery St Mary Devon. Currently Playing Dino Baffetti BP2 in D/G, Hohner Student 1 P.A conversion  in D/G,  Hohner 3515 Pre-Pokerwork in A/D,   2 row "Beaver Brand" in Bb/Eb, Hohner Pre- Erica in G/C .  Single row permanent 4 voice, 4 bass in C from old Hohner single row and bits of a cheap Cajun box !!,

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Varnishing the inside?
« Reply #2 on: February 01, 2019, 07:31:36 PM »

Before making any change I would be asking myself if I am happy with the sound now.  If yes do nothing.  If no do the well understood mods first such as tuning.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

John MacKenzie (Cugiok)

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2360
  • Fettling... Learning to reed and right.
Re: Varnishing the inside?
« Reply #3 on: February 01, 2019, 07:36:32 PM »

May just have made it more airtight ;)

SJ
Logged
There is no beginning to my talent :)



: Hohner Club Modell 1. Bb/Eb, de-clubbed : Early Hohner Pressed Wood A/D : 1930's Varnished wood G/C:  Hohner Erika C/F: Bandoneon tuned D/G Pressed wood: Koch F/Bb; G/C Pre Corso

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Varnishing the inside?
« Reply #4 on: February 01, 2019, 09:52:37 PM »

A friend has told  me that he varnished the inside of his Hohner and it made a noticeable improvement to the tone. Not sure what to  think. He lives away so  I can't verify this opinion. Has anyone else tried this? Might it work, any thoughts folks?
It's possible that it might make the sound brighter by reducing absorption of high frequencies into the wood -- for example, this has been found to be true for concert halls and recording studios.

It's equally possible that it will make no notieable difference, given Strasser's comments about different box materials making no difference to the sound  -- see https://www.harmonika.com/en/interesting

What's certain is that you can't just take the word of somebody who claims it's made a difference when they know it's been done, there are literally thousands of cases like this in many fields -- when people expect there to be a difference they'll often find one, it's called "expectation bias".

Musical instruments are unfortunately a field like hi-fi where much superficially plausible claptrap is spouted as if it's the gospel truth -- and very often under close examination turns out to be wrong...
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Varnishing the inside?
« Reply #5 on: February 01, 2019, 10:38:32 PM »

[
Musical instruments are unfortunately a field like hi-fi where much superficially plausible claptrap is spouted as if it's the gospel truth -- and very often under close examination turns out to be wrong...

Yes, melodeon fake news.
I have varnished Hohner, Paolo Soprani and my own Wesson reed-blocks and compared them directly with equivalent unvarnished blocks and can honestly say that "sometimes it makes a difference and sometimes it doesn't". Is that clear?
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Varnishing the inside?
« Reply #6 on: February 01, 2019, 10:39:43 PM »

It does mean that wax doesn’t stick so well to reed blocks.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Varnishing the inside?
« Reply #7 on: February 01, 2019, 10:41:58 PM »

Seemingly, the big Russian bayans all have varnished insides. If nothing else, they look great and must be easier to keep clean.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Varnishing the inside?
« Reply #8 on: February 01, 2019, 10:44:45 PM »

It does mean that wax doesn’t stick so well to reed blocks.

True dat
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Varnishing the inside?
« Reply #9 on: February 01, 2019, 11:55:13 PM »

It does mean that wax doesn’t stick so well to reed blocks.
True dat
Castagnari varnish the internal floor of the reed chambers and possibly the side walls (can't remember off-hand without opening up one of my boxes) but the top edges of the reed chamber walls are left unvarnished. So the wax sticks OK.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

richard.fleming

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 556
Re: Varnishing the inside?
« Reply #10 on: February 02, 2019, 02:05:50 AM »

Seemingly, the big Russian bayans all have varnished insides. If nothing else, they look great and must be easier to keep clean.
Yes, maybe we need a thread about how often we dust the insides of our boxes..
Logged
Old Paolo Sopranis in C#/D and D/D#

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Varnishing the inside?
« Reply #11 on: February 02, 2019, 06:25:26 AM »

"Yes, maybe we need a thread about how often we dust the insides of our boxes.."

Only if we want to send half of the melodeon world on a guilt trip!
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Varnishing the inside?
« Reply #12 on: February 02, 2019, 08:45:59 AM »

"Yes, maybe we need a thread about how often we dust the insides of our boxes.."

Only if we want to send half of the melodeon world on a guilt trip!

I blow the dust ut of mine every time I play it.
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

blackdot1234

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 152
Re: Varnishing the inside?
« Reply #13 on: February 02, 2019, 11:22:43 AM »

true castagnari varnish the inside of the reed blocks only so wax will bond to hold the reeds in place i was talking to martin quinn and he recently coated the inside of reed blocks with pearl glue and has for years coated the inside of the treble end of the hohner accordions that he turbos with great results
Logged

Roger Hare

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 949
  • Urmston, Lancashire, U.K. éééé
Re: Varnishing the inside?
« Reply #14 on: February 02, 2019, 11:34:35 AM »

A friend has told  me that he varnished the inside of his Hohner and it made a noticeable improvement to the tone. Not sure what to  think. He lives away so  I can't verify this opinion. Has anyone else tried this? Might it work, any thoughts folks?

Many, many years ago, I read a very detailed and technical book on guitar construction.
The received wisdom there was (I paraphrase), the internal surfaces of the body of the
instrument, including the strutting should be as smooth as possible. This was to be achieved
by sanding the surfaces with the finest paper obtainable, rather than by varnishing, but I
guess the principle is the same?
Logged
My ABC tune collections can be found here (GoogleDrive) & here (Dropbox).

For more about Manchester Morris, The Beech Band Folk Club or anything else,  please use the private messaging facility.

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Varnishing the inside?
« Reply #15 on: February 02, 2019, 12:41:08 PM »

I'm anything but technical, but the pearl glue job sounds like the way to go, to me.
Purely subjective of course, and no science at all to back it up. But the dry old pearl glue I've come across in the few instruments which I've had to bits seems very hard, and very smooth. I'm certain that sound waves must just bounce off it, without losing any of their "life-force".
If I wasn't so lazy, I might even have given it a try.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Varnishing the inside?
« Reply #16 on: February 02, 2019, 02:54:09 PM »

[
Musical instruments are unfortunately a field like hi-fi where much superficially plausible claptrap is spouted as if it's the gospel truth -- and very often under close examination turns out to be wrong...

Yes, melodeon fake news.
I have varnished Hohner, Paolo Soprani and my own Wesson reed-blocks and compared them directly with equivalent unvarnished blocks and can honestly say that "sometimes it makes a difference and sometimes it doesn't". Is that clear?

My bet (like Strasser) would be that varnish on the inside of a case doesn't, but I'd be happy to be proved wrong. Note the word "proved", opinions don't count no matter whose they are. With reed blocks it's more likely to make a difference becuase the SPL inside a reed block is way higher than inside a case, and a small amount of sound absorption is more likely to make a difference because of this.

I suppose that when you did the comparison, you got somebody else to swap them over and did a blind A-B-X comparison so you didn't know which one you were listening to?

Because if you didn't I'm afraid it still proves nothing -- there are literally *hundreds* of cases in many different fields (e.g. ultra-expensive cables, musical instruments, food and drink) where people have been absolutely 100% convinced that they could tell the difference, when blind trials proved that they couldn't. Sorry to go on about this, I'm in no way accusing you of deliberately making things up, people are genuinely convinced that they can tell the difference. Also knowledge and experience in the field has nothing to do with it, the most experienced instrument maker/cook/hi-fi nut is just as susceptible to this as a novice -- you expect it to make a difference, so it does.

So you might well be right, but if you knew which you were listening to you haven't proved it. If you didn't, well done for making a (rare!) scientifically valid comparison ;-)

Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Varnishing the inside?
« Reply #17 on: February 02, 2019, 02:59:29 PM »

A friend has told  me that he varnished the inside of his Hohner and it made a noticeable improvement to the tone. Not sure what to  think. He lives away so  I can't verify this opinion. Has anyone else tried this? Might it work, any thoughts folks?

Many, many years ago, I read a very detailed and technical book on guitar construction.
The received wisdom there was (I paraphrase), the internal surfaces of the body of the
instrument, including the strutting should be as smooth as possible. This was to be achieved
by sanding the surfaces with the finest paper obtainable, rather than by varnishing, but I
guess the principle is the same?

Not at all the same, because in a guitar the body and the resonances within it are fundamentally responsible for making the sound of the instrument -- so if it did make a difference in a guitar, this doesn't mean it would in a melodeon.

Also received wisdom has been shown on many occasions to be basically fairy tales -- and in other cases, to be true. No way to tell which is the case for smooth guitar surfaces, it's one of those things that sounds plausible at first but might well not be true.

Having said all this, if you want to varnish the inside it's unlikely to do any harm and might just possibly make a difference -- or at least you're convinced it does, which amounts to the same thing as far as you're concerned :-)
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Varnishing the inside?
« Reply #18 on: February 02, 2019, 03:01:45 PM »

true castagnari varnish the inside of the reed blocks only so wax will bond to hold the reeds in place i was talking to martin quinn and he recently coated the inside of reed blocks with pearl glue and has for years coated the inside of the treble end of the hohner accordions that he turbos with great results

I'm sure the boxes he turbos sound great. Whether any of this is due to varnishing the inside of the treble end is the point in question, and so far the jury is out as far as I can see...
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Roger Hare

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 949
  • Urmston, Lancashire, U.K. éééé
Re: Varnishing the inside?
« Reply #19 on: February 02, 2019, 03:18:02 PM »

Not at all the same, because in a guitar the body and the resonances within it are fundamentally responsible for making the sound of the instrument -- so if it did make a difference in a guitar, this doesn't mean it would in a melodeon.
Aye, that was what I wasn't really sure about - I 'knew' what was supposed to happen with a
guitar - not so sure about what goes on inside a melodeon...
Logged
My ABC tune collections can be found here (GoogleDrive) & here (Dropbox).

For more about Manchester Morris, The Beech Band Folk Club or anything else,  please use the private messaging facility.
Pages: [1] 2 3   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal