Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2] 3   Go Down

Author Topic: Varnishing the inside?  (Read 6042 times)

0 Members and 1 Guest are viewing this topic.

rileycat

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 429
Re: Varnishing the inside?
« Reply #20 on: February 02, 2019, 03:55:02 PM »

Most grateful for the thoughts, folks.  I should have said that my friend also sanded the inside smooth prior to varnishing.  I failed to ask him what sort of 'varnish' was used - was it a cellulose spray type or plain old yacht varnish? I'm very aware of Ian's wise words about subjective impressions, but I think I might try it out on my old Erika, but not on the reed blocks.  Inevitably, though, it'll be a subjective view as I don't have a clue how to measure the 'improvement' or lack of same in any meaningful way except how I feel about it! Any thoughts on varnish type before the deed takes place!!?
Logged

playandteach

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3526
  • Currently a music teacher in a high school.
Re: Varnishing the inside?
« Reply #21 on: February 02, 2019, 05:07:50 PM »

Theo varnished my red cedar reed blocks for me. Didn't change the sound as far as I can tell. That was about 5 years ago and no wax problems. Did smell for a while of course. My Brandoni accordion was also varnished. Great sounding box.
Logged
Serafini R2D2 GC, Serafini GC accs 18 bass

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Varnishing the inside?
« Reply #22 on: February 02, 2019, 05:14:54 PM »

Quote
Any thoughts on varnish type before the deed takes place!!?

If your box is dull-sounding, use high-gloss varnish to brighten it.  If too brash, try satin or matte.   ;)
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Varnishing the inside?
« Reply #23 on: February 02, 2019, 06:51:39 PM »

[
Musical instruments are unfortunately a field like hi-fi where much superficially plausible claptrap is spouted as if it's the gospel truth -- and very often under close examination turns out to be wrong...

Yes, melodeon fake news.
I have varnished Hohner, Paolo Soprani and my own Wesson reed-blocks and compared them directly with equivalent unvarnished blocks and can honestly say that "sometimes it makes a difference and sometimes it doesn't". Is that clear?

My bet (like Strasser) would be that varnish on the inside of a case doesn't, but I'd be happy to be proved wrong. Note the word "proved", opinions don't count no matter whose they are. With reed blocks it's more likely to make a difference becuase the SPL inside a reed block is way higher than inside a case, and a small amount of sound absorption is more likely to make a difference because of this.

I suppose that when you did the comparison, you got somebody else to swap them over and did a blind A-B-X comparison so you didn't know which one you were listening to?

Because if you didn't I'm afraid it still proves nothing -- there are literally *hundreds* of cases in many different fields (e.g. ultra-expensive cables, musical instruments, food and drink) where people have been absolutely 100% convinced that they could tell the difference, when blind trials proved that they couldn't. Sorry to go on about this, I'm in no way accusing you of deliberately making things up, people are genuinely convinced that they can tell the difference. Also knowledge and experience in the field has nothing to do with it, the most experienced instrument maker/cook/hi-fi nut is just as susceptible to this as a novice -- you expect it to make a difference, so it does.

So you might well be right, but if you knew which you were listening to you haven't proved it. If you didn't, well done for making a (rare!) scientifically valid comparison ;-)

The point I was making and you apparently missed was that I actually proved nothing!!!
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Varnishing the inside?
« Reply #24 on: February 02, 2019, 07:25:56 PM »

You proved it’s more work I’m sure.

When talking about varnish here, are we taking about several coats ( sand and tack and all that 3 or four times ) or just a sealer coat?
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Varnishing the inside?
« Reply #25 on: February 02, 2019, 07:43:02 PM »

The point I was making and you apparently missed was that I actually proved nothing!!!

You proved that some reed blocks, in your perception, sound better than others, Rees.
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Varnishing the inside?
« Reply #26 on: February 02, 2019, 08:15:36 PM »

Or do they, or is it the reeds or the box or the fairies in the music?
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Roger Hare

  • Hero Member
  • *****
  • Online Online
  • Posts: 949
  • Urmston, Lancashire, U.K. éééé
Re: Varnishing the inside?
« Reply #27 on: February 02, 2019, 11:30:30 PM »

...Any thoughts on varnish type before the deed takes place!!?
I would have thought that yacht varnish (with which I do have some experience) was a bit 'heavy-duty'
for an application such as this?
Logged
My ABC tune collections can be found here (GoogleDrive) & here (Dropbox).

For more about Manchester Morris, The Beech Band Folk Club or anything else,  please use the private messaging facility.

rileycat

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 429
Re: Varnishing the inside?
« Reply #28 on: February 17, 2019, 05:39:22 PM »

FWIW Just to update.  I took out the reed blocks etc., masked, then cleaned, smoothed (a very small amount) and lightly sprayed some matt varnish inside my Erika.  Result - no detectable difference to my ear, just a slightly different smell for a few playings!! Told friend and he said 'oh' - so that ends my experiment, but at least nothing got spoiled and it's now very clean inside  :D.
Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Varnishing the inside?
« Reply #29 on: February 17, 2019, 05:45:48 PM »

I think that might be called (in footballing parlance) a "result"!
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

boxer

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 380
  • B/C Pokerwork - ultimate ceili box
Re: Varnishing the inside?
« Reply #30 on: February 17, 2019, 07:09:00 PM »

I suspect that removing the "Hohner" logo and replacing it with a "Castagnari" one might have the same effect on some boxes.  Ears are very unreliable measuring instruments.  Boxes have been built for long enough for the cardinal points of good design and construction to have been established.  If internal varnishing (which wouldn't add greatly to production cost) made any significant improvement, it would have been widely adopted long ago.
Logged
Nuage, Tommy, Cairdin, 
Double Ray DLX 21x12, Black Dot,
Pre-Erica, Pokerwork
plus various stringed things

Anne Croucher

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 203
Re: Varnishing the inside?
« Reply #31 on: February 19, 2019, 04:46:22 PM »

I might try polishing inside my mistreated D/G Erica, aka Dent, to try to diminish the smell of cigarettes.
I do wish my husband had not thrown away the huge tin of furniture polish I had - the smell was pure nostalgia and used to combat my father's smoking habit for several days each week.
Removing the cloth from the grille has made a big difference, but now that the smells from the work I did with various glues and fillers are dispersing the pong of nicotine is becoming apparent again.
Logged
Barcarole D/G
Hohner Ericas D/G and C/F
Hohner el Rey del Vallenato A/D/G aka 'Elvis'
Hohner Liliput Bb/Eb club layout
Meinel & Herold G C F 3 voice 3 row 16 bass

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Varnishing the inside?
« Reply #32 on: February 19, 2019, 04:57:34 PM »

I might try polishing inside my mistreated D/G Erica, aka Dent, to try to diminish the smell of cigarettes.
I do wish my husband had not thrown away the huge tin of furniture polish I had - the smell was pure nostalgia and used to combat my father's smoking habit for several days each week.
Removing the cloth from the grille has made a big difference, but now that the smells from the work I did with various glues and fillers are dispersing the pong of nicotine is becoming apparent again.
Try Febreze fabric deodoriser. It's often the bellows which retains the smell of cigarette smoke. Spray lightly inside the bellows and leave to dry naturally. Just a slight dampening is all that's needed. Don't saturate the folds otherwise they might disintegrate!

Repeat a day or so later if necessary. You can also treat the outside of the bellows the same way.

If you want to similarly treat the wood interior of the casework, remove the reed blocks first. Don't spray those.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

gettabettabox

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 684
Re: Varnishing the inside?
« Reply #33 on: February 19, 2019, 05:30:05 PM »

A nice “parfum” of your choice can also be used and might suit the olfactory sense better, though cost is more!
I have used retro 80’s male fragrances that have a bit more staying power than today’s metrosexual eau de toilettes. (Another acquisition disorder.)
Stinky boxes down at the session.  8)
Logged

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Varnishing the inside?
« Reply #34 on: February 19, 2019, 06:51:44 PM »

A nice “parfum” of your choice can also be used and might suit the olfactory sense better, though cost is more!
I have used retro 80’s male fragrances that have a bit more staying power than today’s metrosexual eau de toilettes. (Another acquisition disorder.)
Stinky boxes down at the session.  8)

Hmm, shall I go for the Brut or the Karate?
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Varnishing the inside?
« Reply #35 on: February 19, 2019, 07:11:58 PM »

A treatment I use for stinky bellows is to wipe all surfaces inside and out (especially the bellows) with a cloth dipped in a detergent solution and then squeezed out. I think this is effective because it removes a lot of surface dust as well as other contamination.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

gettabettabox

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 684
Re: Varnishing the inside?
« Reply #36 on: February 19, 2019, 08:51:30 PM »

A nice “parfum” of your choice can also be used and might suit the olfactory sense better, though cost is more!
I have used retro 80’s male fragrances that have a bit more staying power than today’s metrosexual eau de toilettes. (Another acquisition disorder.)
Stinky boxes down at the session.  8)

Hmm, shall I go for the Brut or the Karate?
Aramis, Kouros or Lapidus pour homme.  ;D
Logged

playandteach

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3526
  • Currently a music teacher in a high school.
Re: Varnishing the inside?
« Reply #37 on: February 19, 2019, 11:10:15 PM »

A nice “parfum” of your choice can also be used and might suit the olfactory sense better, though cost is more!

Hmm, shall I go for the Brut or the Karate?
Aramis, Kouros or Lapidus pour homme.  ;D
D & G  of course.
Logged
Serafini R2D2 GC, Serafini GC accs 18 bass

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: Varnishing the inside?
« Reply #38 on: February 19, 2019, 11:52:53 PM »

Not certain of the practicality with melodeons but apart from it's affinity with superglue, bicarbonate of soda powder absorbs all sorts of long term smells, our various thermos & other containers are treated to a spoonful or two after washing & drying and are fresh and ready for use next time needed.  Also pretty effective in my workboots, trainers and wellies - although it is recommended to empty out before you put them on the next time.
A long shallow tray folded up from ali foil or a cloth 'sock' might be worth trying.
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

-Y-

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 896
  • Handry 18 (G/C), Mélodie (D), Club IIb (A/D)
    • a database of nearly 500 melodeons here
Re: Varnishing the inside?
« Reply #39 on: February 19, 2019, 11:55:26 PM »

This discussion (and others about whether this or that parameter has an influence on the sound) almost makes me want to design a big experiment where we'd test each parameter one-at-a-time on a neutral and repeatable set-up.
Pages: 1 [2] 3   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal