Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Busillachio project  (Read 3205 times)

0 Members and 1 Guest are viewing this topic.

Gav Wood

  • Good talker
  • **
  • Offline Offline
  • Posts: 99
Busillachio project
« on: March 01, 2019, 07:04:56 PM »

Hi all, I have been a lurker and reader on here for a while.

Thought you might like to see my project box. I started it because i wanted an old paolo alike but not for the cost.
It was a piano busilacchio 2 octave but i have turned it into a bc button box.
The box came from ebay locally to me for 15 quid.

I made the buttons from a piece of delrin rod i had, had to plane it down to size and round it. The levers had to be changed to get the reeds in the right place, and levers bent to match button spacing.
The fingerplate is the old back of the piano keyboard, i had to attach the aluminium L plate to stabilise it, the plywood under the plastic was not great. The aluminium was originally the stop for the keys in the section i cut off.
I now have the original reeds in it, i tried with junk piano accordion reeds to start off, and experimented to see how to get the reeds to bc tuning best. I tried cutting and taping, cutting and inserting an aluminium stop, solder, sticking aluminum or lead shavings on, and sticking lead lumps on. I came to the conclusion that sawing the reeds in half with a razor saw and sticking back together was best, but had to load some reeds to get the notes below the original c on the piano.

I still have some work to do to finish it off, the stop for the keys is really a temporary measure, as are the cut ends of the keyboard, and i have not yet got all reeds in beyond the normal 21 buttons.

I tuned it to about 5-7cents each side dedic, a bit more on the bottom, less on top. I also had to fit a bridge between the reed blocks as could not get the f sharp reeds to separate and pulse without it, even tuning upto 15 cents apart.

I have been playing it at home and out for a couple of months now, and people have said how nice it sounds, I am unlikely to go back to my other boxes now with how good it sounds and is faster than anything else i have.

I also have a couple of full size 3 voice paolo soprani badged piano boxes that i picked up cheap. They are mostly identical in manufacture to the busillachio, but not made as well. I might have a go at shortening one of these next.

Gavin.
« Last Edit: March 02, 2019, 08:59:32 AM by Gav Wood »
Logged

Gav Wood

  • Good talker
  • **
  • Offline Offline
  • Posts: 99
Re: Busillachio project
« Reply #1 on: March 01, 2019, 07:06:02 PM »

More photos
Logged

John MacKenzie (Cugiok)

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2360
  • Fettling... Learning to reed and right.
Re: Busillachio project
« Reply #2 on: March 01, 2019, 07:21:07 PM »

Wow, that's a labour of love. Well done for even attempting something so radical. Good luck with it.

SJ
Logged
There is no beginning to my talent :)



: Hohner Club Modell 1. Bb/Eb, de-clubbed : Early Hohner Pressed Wood A/D : 1930's Varnished wood G/C:  Hohner Erika C/F: Bandoneon tuned D/G Pressed wood: Koch F/Bb; G/C Pre Corso

Gav Wood

  • Good talker
  • **
  • Offline Offline
  • Posts: 99
Re: Busillachio project
« Reply #3 on: March 01, 2019, 07:35:43 PM »

Thanks John,
Just a bit of fun.
Recording of something i am learning:

https://youtu.be/NoLTBwTYCNI



Logged

Pearse Rossa

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 723
Re: Busillachio project
« Reply #4 on: March 02, 2019, 01:56:51 AM »

Thought you might like to see my project box.
Very interesting indeed.

Quote
I came to the conclusion that sawing the reeds in half with a razor saw and sticking back together was best...
I don't think I understand that fully.

Quote
I tuned it to about 5-7cents each side dedic
I like the sound of it, but you can't achieve the classic Paolo sound with a 2-voice.

Quote
I also have a couple of full size 3 voice paolo soprani badged piano boxes.... I might have a go at shortening one of these next
That should get you closer to the sound you want, but I would have reservations about the size of the
box you end up with!








Logged

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: Busillachio project
« Reply #5 on: March 02, 2019, 03:35:01 AM »



Quote
I came to the conclusion that sawing the reeds in half with a razor saw and sticking back together was best...
I don't think I understand that fully.



I assumed that Gav is writing about the individual reedplates. As you know Pearse Rossa each plate will typically have 2 reed tongues for press/draw. On a piano box these 2 reedtongues are tuned to the same pitch but on a diatonic box usually will differ by a semitone, or a full tone, or even up to a fourth interval at the extremes of the keyboard range (e.g. C and F and the low end of a C row, and perhaps F# and C# at the high end of a B row etc).

If you were to saw the reed plates from a piano accordion in half (very carefully and skillfully with a very fine kerf) you could then re-assemble the halves to get closer to the paired pitches you need for a diatonic box with less re-tuning.

PG
Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Busillachio project
« Reply #6 on: March 02, 2019, 05:06:07 AM »

Thanks for that explanation, Paul!
Like Pearse, I was also stumped! I was imagining reeds being soldered together across the middle, creating something of a weak point, haha! (Stupid, or what?)
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: Busillachio project
« Reply #7 on: March 02, 2019, 05:14:00 AM »

Thanks for that explanation, Paul!
Like Pearse, I was also stumped! I was imagining reeds being soldered together across the middle, creating something of a weak point, haha! (Stupid, or what?)

Well, that's my guess, but we'll see what Gav explains. Obviously he's a skilled and careful workman.

Logged

Andrew Kennedy

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 184
    • About Sword Dancing
Re: Busillachio project
« Reply #8 on: March 02, 2019, 05:17:17 AM »

How long did it take you, Gav?
Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Busillachio project
« Reply #9 on: March 02, 2019, 05:20:29 AM »

"(Stupid, or what?)"

I've just re-read that, and thought that I should point out that I was referring to myself, NOT the OP or his possible methods.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Gav Wood

  • Good talker
  • **
  • Offline Offline
  • Posts: 99
Re: Busillachio project
« Reply #10 on: March 02, 2019, 07:43:33 AM »

Photos to show how the reeds are done below.

This has really just been a learning exercise for me, i could easily have bought new reeds or put in a set from somewhere else, but i wanted to use the originals. It has also shown me how different reeds behave after trying different pa reeds aswell.

I decided on cutting in half for most of them due to other methods not leaving the same shape, cutting down in length and loading both leave you with a reed shape not quite in line with the rest. I also could not get a suitable repeatable gap when cutting and filling the reed chamber.

I used a bench hook and cut a slot, then cut in half down the length with a razor saw. This works for aluminium shoes, takes a couple of minutes but zinc does not cut as easily.

Then glue back together as in the picture.

« Last Edit: March 02, 2019, 08:55:11 AM by Gav Wood »
Logged

richard.fleming

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 556
Re: Busillachio project
« Reply #11 on: March 02, 2019, 07:55:35 AM »

Thanks John,
Just a bit of fun.
Recording of something i am learning:

https://youtu.be/NoLTBwTYCNI
That's quite a quirky version of the Tarbolton. I'm not quite decided what I think of it, but it's definitely interesting alright.
Logged
Old Paolo Sopranis in C#/D and D/D#

Gav Wood

  • Good talker
  • **
  • Offline Offline
  • Posts: 99
Re: Busillachio project
« Reply #12 on: March 02, 2019, 08:06:04 AM »

Examples of reeds i had a go at before settling on a method. I got them all to work, but the results were not consistent. Shortening the reeds and then cutting a slot and inserting a flat piece of aluminium seemed to work ok. First couple of attempts at cutting down the middle and glueing on the right, before i worked out how to align the two halves.
Logged

Gav Wood

  • Good talker
  • **
  • Offline Offline
  • Posts: 99
Re: Busillachio project
« Reply #13 on: March 02, 2019, 08:14:44 AM »

How long did it take you, Gav?

Took about 6 months i think, some evenings and weekends.

The buttons took a while as they were made by hand, i dont have a lathe. Most of the time though was the reed work. The blocks i had to make larger for the first set of reeds i had in, the junk reeds were a lot longer, most were stamped scandalli.
Logged

Gav Wood

  • Good talker
  • **
  • Offline Offline
  • Posts: 99
Re: Busillachio project
« Reply #14 on: March 02, 2019, 08:54:36 AM »

Quote from: Pearse Rossa link=topic=23605
Quote
I also have a couple of full size 3 voice paolo soprani badged piano boxes.... I might have a go at shortening one of these next
That should get you closer to the sound you want, but I would have reservations about the size of the
box you end up with!

I have thought about adding an extra voice into this one instead. Shouldnt be too difficult and i have the donor block and reeds in the full size pa.

If i do the full conversion it will end up the same size as this one, bellows 16 by 31 cm. The larger pas still have the16cm bellows depth, just need to lose a few cm off the length. Not worked out exactly how to do it yet but should not be too difficult, just time consuming.

The paolos i have are made by the same hands as this busilacchio one, exactly the same construction, but cheaper fittings and action is not quite as good. They were obviously made by busillachio but to a price. These come up regularly on ebay badged as paolos, there are at least a couple on there now, paid £60 for mine, bought at that time for the reeds more than anything else.

What made me buy the busilacchio was this quote from lars

Busilacchio is one of the big boys in italian box-making some 50-70 years ago. They made many boxes for others, as well as parts. Some of the finest Paolo Soprani boxes were actually made at Busilacchio. I've come across a few, and they have all been of very fine quality, though the treble action gets much better with the right tweaking.

I have a 2 voice that unfortunately was exposed to water at some point, making the plys of the wooden construction come unglued. A friend of mine used to have a 2 voice C/C# that was GREAT for a compact 2 voice machine. Roaring basses and sweet treble sound. Original reeds of very high quality (identical to those found in some old paolo sopranis).
« Last Edit: March 02, 2019, 08:58:39 AM by Gav Wood »
Logged

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: Busillachio project
« Reply #15 on: March 02, 2019, 01:54:55 PM »

I am really impressed - Some people talk of up-cycling when they paint an old piece of polished wood furniture (usually badly) - but this is the real deal.
Well done sir.
Logged

Pearse Rossa

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 723
Re: Busillachio project
« Reply #16 on: March 02, 2019, 02:27:33 PM »

If you were to saw the reed plates from a piano accordion in half (very carefully and skillfully with a very fine kerf) you could then re-assemble the halves to get closer to the paired pitches you need for a diatonic box with less re-tuning.
I see. Now that you've explained it, I remember that I had read about the technique (on the forum),
but it's not something I've tried myself. Thanks for the explanation.

The paolos i have are made by the same hands as this busilacchio one, exactly the same construction, but cheaper fittings and action is not quite as good. They were obviously made by busillachio but to a price. These come up regularly on ebay badged as paolos...
I have owned a few Busilacchio button boxes, and I would agree that they were indeed well-made.
Very robust and very good quality construction. The reeds also were of good stock.
Having said that, I wouldn't rate any of them ahead of my Paolo boxes.
To my mind, a Paolo sounds better and plays better.
Logged

Man1nvan

  • Member
  • *
  • Offline Offline
  • Posts: 21
Re: Busillachio project
« Reply #17 on: March 02, 2019, 07:55:42 PM »

Well done, i am sure you will enjoy playing your very own 1-off box.  this is what i like about these instruments and this forum,  everyone does things their own way.
How did you get the holes in the keyboard top in the right place?
Logged
de-clubbed Hohner Modell 1 C/F,  Student D/G, Victoria Club modell

Gav Wood

  • Good talker
  • **
  • Offline Offline
  • Posts: 99
Re: Busillachio project
« Reply #18 on: March 02, 2019, 10:46:43 PM »

I drilled the holes with a flat bit. The fingerplate was drilled first, measured out the same as my saltarelle. Then i glued the buttons on. It would be difficult the other way around.
Logged

Gav Wood

  • Good talker
  • **
  • Offline Offline
  • Posts: 99
Re: Busillachio project
« Reply #19 on: March 02, 2019, 10:50:04 PM »

From memory, i drilled the fingerplate having worked out i needed to bend the levers. I then cut the wood on the levers to allow the levers to bend to match where the holes were.
Logged
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal