Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Concertina, but with melodeon plates.  (Read 1277 times)

0 Members and 1 Guest are viewing this topic.

John MacKenzie (Cugiok)

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2360
  • Fettling... Learning to reed and right.
Concertina, but with melodeon plates.
« on: March 07, 2019, 06:51:21 PM »

I was asked to look at an old German made "The National Band" brand concertina. It has brass reeds on zinc plates, in blocks of about 6, and one of the reeds is broken. Is it possible to replace it? It's not really worth repairing and I'll probably pass it on to someone who can use it, but I just wondered.


Sir John
Logged
There is no beginning to my talent :)



: Hohner Club Modell 1. Bb/Eb, de-clubbed : Early Hohner Pressed Wood A/D : 1930's Varnished wood G/C:  Hohner Erika C/F: Bandoneon tuned D/G Pressed wood: Koch F/Bb; G/C Pre Corso

Pearse Rossa

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 723
Re: Concertina, but with melodeon plates.
« Reply #1 on: March 07, 2019, 07:37:53 PM »

I was asked to look at an old German made "The National Band" brand concertina. It has brass reeds on zinc plates, in blocks of about 6, and one of the reeds is broken. Is it possible to replace it? It's not really worth repairing and I'll probably pass it on to someone who can use it, but I just wondered.


Sir John
Have a look at these videos. It's harmonica reed repair, but the principle is the same I guess.
https://www.youtube.com/watch?v=74Q8AwAZIs0
https://www.youtube.com/watch?v=-fVReyQfwA8
Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Concertina, but with melodeon plates.
« Reply #2 on: March 07, 2019, 07:47:45 PM »

"It's not really worth repairing"

That would really depend on how much you want a concertina, surely? Plus, of course, just how much cash you have spare.
 
I would guess that there are a number of us on here who would have spare long-plates of reeds knocking about, and which could be broken up for the odd reed tongue. Perhaps the tongue wouldn't be the correct fit for the original slot, but you never know until you try, or at least measure! I have one or two (put away somewhere for safety's sake?) but I think they might be all C and C#, so probably no use.

I don't, but someone else might, actually know whether a particular key melodeon long reedplate could just be shortened to make one which would act as a full replacement to do the job?

All sorts of things become possible when one is desperate enough, just checkout the Russian videos which we had on here a week or two ago.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Concertina, but with melodeon plates.
« Reply #3 on: March 07, 2019, 08:17:08 PM »

That last comment just about sums it up.  You have to be desperate to take in replacing broken reeds in these things. I’ve done a few, but avoid them now.
In principle it’s simple, take out the rivet,  fit new reed and new rivet. In practice the reeds are not necessarily a good fit,  and they are rather flimsy,  so it’s easy to damage the replacement reed while salvaging it and while filing it to fit.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

John MacKenzie (Cugiok)

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2360
  • Fettling... Learning to reed and right.
Re: Concertina, but with melodeon plates.
« Reply #4 on: March 07, 2019, 08:29:13 PM »

Rightio , anybody wants it for a donation to Melnet, and the cost of postage, it's theirs.

Sir John
Logged
There is no beginning to my talent :)



: Hohner Club Modell 1. Bb/Eb, de-clubbed : Early Hohner Pressed Wood A/D : 1930's Varnished wood G/C:  Hohner Erika C/F: Bandoneon tuned D/G Pressed wood: Koch F/Bb; G/C Pre Corso

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Concertina, but with melodeon plates.
« Reply #5 on: March 07, 2019, 08:35:56 PM »

I have a lovely looking 30 button jobbie (for which I gave far too much money!) waiting to be made playable before I try to move it on. I had hoped that it might have actually been a better model than it is, but it's not! Very cunning, these European manufacturers.
Of course, our Dear Leader is absolutely correct in agreeing with Sir John; like mine, it's probably not worth a light.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

folkloristmark

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 582
    • street entertainers
Re: Concertina, but with melodeon plates.
« Reply #6 on: March 07, 2019, 09:08:19 PM »

If you have the inclination either cut the block and fill the gap with cut replacement from another block. Wax the joins or take out the tounge and araldite another melodeon reed on top of the hole.(might have to enlarge) You can half the melodeon reed with patience. Or give it to me or winston.LOL
Logged
Mark Taylor
Folkloristmark

John MacKenzie (Cugiok)

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2360
  • Fettling... Learning to reed and right.
Re: Concertina, but with melodeon plates.
« Reply #7 on: March 08, 2019, 10:24:59 AM »

Odd shaped plate, makes that method more difficult. Anyway, The whole thing needs so much work, and would take many hours of work, to end up with something that's worth a lot less than it would cost to repair. The plates are held on by bent nails, and have twine gaskets. The blocks are nailed and glued to the fondo, there are missing buttons, etc etc.

Sir John
Logged
There is no beginning to my talent :)



: Hohner Club Modell 1. Bb/Eb, de-clubbed : Early Hohner Pressed Wood A/D : 1930's Varnished wood G/C:  Hohner Erika C/F: Bandoneon tuned D/G Pressed wood: Koch F/Bb; G/C Pre Corso

Gena Crisman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1108
  • 🇬🇧
Re: Concertina, but with melodeon plates.
« Reply #8 on: March 08, 2019, 02:09:41 PM »

Right, but, how are the bellows?
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal