Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: wax fumes  (Read 2741 times)

0 Members and 1 Guest are viewing this topic.

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: wax fumes
« Reply #20 on: March 09, 2019, 12:00:29 PM »

I just would add the link I provided was just a starting point model the company Weller sells the $1000 plus models also and they are for the type of fumes you want to extract and are industrial.
There are others of course.
I did my waxing with a table set up in front of a window with a small two way box fan set up in it drawing the air out, it work pretty well. Would have been better if it wasn’t winter time ;)
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: wax fumes
« Reply #21 on: March 09, 2019, 04:13:18 PM »

Quote
Yes, I built a wooden box about 65cm on all sides. It has a light inside and a socket for my waxing iron. At the top is a 10cm flexible tube feeding to a bathroom extractor fan in the outside wall.

Just an idea: something similar could be cobbled up using an old range hood as the lid of the box.  These things usually have light and variable speed fan built-in.
Logged

John MacKenzie (Cugiok)

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2360
  • Fettling... Learning to reed and right.
Re: wax fumes
« Reply #22 on: March 09, 2019, 04:25:40 PM »

Good thinking, a new one is cheap enough. Just fasten it on top of a suitable box, connect to the power, and add ducting to take it outside.



https://www.ebay.co.uk/itm/ESSENTIALS-C60SHDX17-Visor-Cooker-Hood-Stainless-Steel-Currys/132303396102?epid=2196513558&hash=item1ecde59d06:g:4lAAAOSw2sxcPvqr


Sir John
Logged
There is no beginning to my talent :)



: Hohner Club Modell 1. Bb/Eb, de-clubbed : Early Hohner Pressed Wood A/D : 1930's Varnished wood G/C:  Hohner Erika C/F: Bandoneon tuned D/G Pressed wood: Koch F/Bb; G/C Pre Corso

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: wax fumes
« Reply #23 on: March 09, 2019, 04:52:51 PM »

In order to avoid possibly hazardous fumes: Do NOT use soldering irons, at least not for time consuming jobs such as rewaxing whole instruments. Get yourself a melting pot (with a heat regulator), place it under some kind of extractor fan ( the one placed over a kitchen stove will do just fine) and use either a German type wax spoon or its Italian equivalent, the spatula.
« Last Edit: March 09, 2019, 04:56:54 PM by diatonix »
Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: wax fumes
« Reply #24 on: March 09, 2019, 05:47:14 PM »

I'm still reading this thread with fascination.

It's all very well recommending this extractor, or that fan box or whatever; to folk who can easily afford to buy them. It becomes a different kettle of fish when you're suggesting such expenditure to those of us who become amateur repairers mainly because of our financial inadequacies.
If I could afford it, I'd try to have Mr Theo as my personal fettler, and then I wouldn't have to risk my health with hot wax fumes. But I cannot, so I have to make do and mend, using a soldering iron which I already had to hand. I'd thought of borrowing my Number One Daughter's wax melting pot, which she uses in her shop, just to give that a try! But maybe she wouldn't like to get it back stinking of burnt waxy resin etc.
My waxing is done in relatively short spurts, so I'm never exposed to any fumes for very long, and I'm careful enough to not cause it to smoke except when a momentary lack of concentration occurs. But I'm convinced that a simple extraction device which draws the air from very close to the workpiece, would be protection enough for most waxers, without spending hundreds of pounds and taking up half of our workshop space!
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

mory

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 752
Re: wax fumes
« Reply #25 on: March 09, 2019, 05:52:41 PM »

You can always open the window, door or otherwise, bit of through draft never hurt anyone, well maybe a crick in the  kneck when it's cold. AtB mory
Logged

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: wax fumes
« Reply #26 on: March 09, 2019, 06:28:27 PM »

Invested in a small room air filter for the workroom last fall since the California fires last fall were so bad that the local air quality was worse than Bjeing and everyones eyes were burning (over 400). I now leave it on low all the time in the work room when we are working since it does a great job of dealing with rosin/wax smoke.
The little one I got was about $65.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: wax fumes
« Reply #27 on: March 09, 2019, 06:58:47 PM »

Have you got a nearby scrapyard or recyclers taking in domestic or commercial stuff rather than just cars ? if so just about all commercial electrical drive systems - servo's or variable speed stuff need to shed a lot of heat so generally have large finned ali heat sinks and axial fans to pass large amounts of air over them, a fan ought to cost next to nothing, you can make a duct for it (like the old 2 gallon can funnels) from cardboard box material and duct tape into a booth, sides made from stripwood with pvc sheet stapled to it (opened out carrier bags) the outfall from the fan can be made using that collapsible convoluted (?) ducting for clothes driers to a suitable window, door, catflap. Not much difference to a jury rigged spray painting booth but smaller and can be made to knock down so the space is not wasted.

Oh, a lot of such fans are 110 volts (US heritage) not a problem, if you can find two the same current rating, run them in series.

Some domestic radiators also feature a fan as do kitchen extractors, all frequently scrapped long before their life has expired in this world of constant remodelling of residences...

HTH
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: wax fumes
« Reply #28 on: March 09, 2019, 08:20:30 PM »

In order to avoid possibly hazardous fumes: Do NOT use soldering irons, at least not for time consuming jobs such as rewaxing whole instruments. Get yourself a melting pot (with a heat regulator), place it under some kind of extractor fan ( the one placed over a kitchen stove will do just fine) and use either a German type wax spoon or its Italian equivalent, the spatula.
Of course listen to experience!, but if you must use soldering iron it might not be a bad idea to have a rag on hand to wipe the tip between use, I found it smoked more after it was removed from the work when there was just what was remaining on the tip of the iron.  So wiping helped to cut down on it.
I only use it for touch up, did the bulk with a spoon but I need practice.
I like that the spoon could give you a good amount of wax at once, bit of a curse to the inexperienced though.
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

mselic

  • Hero Member
  • *****
  • Online Online
  • Posts: 1683
Re: wax fumes
« Reply #29 on: March 09, 2019, 09:00:15 PM »

Quote
Yes, I built a wooden box about 65cm on all sides. It has a light inside and a socket for my waxing iron. At the top is a 10cm flexible tube feeding to a bathroom extractor fan in the outside wall.

Just an idea: something similar could be cobbled up using an old range hood as the lid of the box.  These things usually have light and variable speed fan built-in.

That’s a good idea!
Logged
C#/D player

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: wax fumes
« Reply #30 on: March 09, 2019, 11:35:39 PM »

Winston mentions No.1 daughter's waxing pot....No.1 daughter's old PC might be a better bet- there will be a low voltage fan and just as important a power pack (aka transformer) in the casing.

 I will be scrapping a couple of old PC's in the next few weeks-I will be happy enough to salvage the fans for anyone willing to pay for a jiffy bag and a stamp.

Peadar
Logged

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: wax fumes
« Reply #31 on: March 09, 2019, 11:56:21 PM »

Use Freecycle if you want to do it on the cheap. Just ask for a scrap extractor fan. It might be in a hood or expelair or an inline fan. I used a scrap hood mounted in the roof to keep down the dust in my workshop.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal