Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: New gasket  (Read 1682 times)

0 Members and 1 Guest are viewing this topic.

ju

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 174
New gasket
« on: March 08, 2019, 03:52:53 PM »

I need to replace the bellows gasket on an old HA114 . Is there a specific size to use ( nothing left of the old one to tell )  and is stuff from cgm any different to stuff I might be able to pick up in a local diy place ? Thanks
Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: New gasket
« Reply #1 on: March 08, 2019, 04:00:29 PM »

I've found Mr Marshall to be very helpful. I've also tried stuff from the DIY market, but it wasn't very successful, then I still had to buy the proper stuff as well, so too much money spent!
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: New gasket
« Reply #2 on: March 08, 2019, 05:12:28 PM »

I need to replace the bellows gasket on an old HA114 . Is there a specific size to use ( nothing left of the old one to tell )  and is stuff from cgm any different to stuff I might be able to pick up in a local diy place ? Thanks
The proper bellows gasket is a firm but flexible neoprene strip, with the added advantage of a self-adhesive backing which has just the right degree of tackiness to allow for some initial adjustment. DIY draught excluder (for example) tends to be too soft with more open pores. The proper stuff from Charlie Marshall is cheap enough and very easy to apply. I think it is false economy to try to improvise with anything else. 
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

ju

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 174
Re: New gasket
« Reply #3 on: March 08, 2019, 05:20:23 PM »

Cheers , cgm it is then 🙂
Logged

Psuggmog Volbenz

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 318
    • musical whimsy
Re: New gasket
« Reply #4 on: March 18, 2019, 08:15:00 AM »

The dimenstion of the gasket is dictated by the size of the bellows frame and end frame. I make my own gaskets from from sheets of thin foam. I used to cut the gasket out in one piece using a scalpel. This left lots of excess material. Now I cut strips, using a hand crank geared rotary cutter which was designed to cut uniforn strips of cloth, cork, leather or sandpaper. This tool also workes well for making bellows tape. The tool is a Fraser model 500-1.
https://www.fraserrug.com/products/fraser-model-500-1
« Last Edit: March 18, 2019, 08:17:10 AM by Psuggmog Volbenz »
Logged
I'm squeezin' and they're wheezin': old junker boxes

folkloristmark

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 582
    • street entertainers
Re: New gasket
« Reply #5 on: March 18, 2019, 09:49:29 AM »

Woh  thats good, I use scissors. You can get Diy stuff that is the same on Ebay from china cheap but it may take a few goes to get the right stuff,if its a one off then CM is good.The original was a string gasket that is used in Marine shops to gap holes its just a soft string bet thats what you had if there's none left. Forget what is called someone here will remember.But you can cut foam or leather if its the right thickness.One piece gasket is very pleasing but easier to use strips angle the cut meets   /   so to stop leaks and avoid joints at he corners if possible.It will either bend around like draught excluder or just add a right angle corner if cutting one piece.You dont need to glue anything untill you are happy it works.Good to have a bit of flexibilty at fist so use a slower grip glue PVA etc Dont use too much and glue the bellows together.
« Last Edit: March 18, 2019, 09:51:22 AM by folkloristmark »
Logged
Mark Taylor
Folkloristmark

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: New gasket
« Reply #6 on: March 18, 2019, 10:30:01 AM »

<rant warning>
Sorry (and criticise me if you wish), but bellows gasket is one of those components that I really do not see the point of improvising by using materials that were never intended for the job - draught excluder, leather, string, chuffing about with glue, etc. despite what may have been used in the past.

These days, the self-adhesive neoprene gasket material as used by professional accordion/melodeon builders, manufacturers and repairers is readily available for anyone to obtain - cheaply and easily. It is perfect for the job, is easily applied and adjusted, and lasts for years and years. If it ever does needs to be replaced for any reason, it is easy to remove with the minimum of fuss and mess.

Charlie Marshall supplies the stuff and will ship internationally, or if you want to buy it in bulk - if you are making or restoring many instruments, then Carini will probably work out a bit cheaper.
</rant warning>
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: New gasket
« Reply #7 on: March 18, 2019, 10:55:13 AM »

As someone who worked with neoprene gaskets for 25 years I feel qualified to comment, for once. You could waste a lot of effort hunting for a cheap supply of the right stuff. The available products have a wide range of properties, which vary in ways that aren't immediately obvious.

Just buy from CGM or another specialised supplier of material selected for purpose.
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

ju

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 174
Re: New gasket
« Reply #8 on: March 18, 2019, 03:18:42 PM »

Charlie sorted me out with the right stuff , and it did the job nicely . Cheers
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal