Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2 3 4 5 6 ... 13   Go Down

Author Topic: Building a one row four stop  (Read 47518 times)

0 Members and 1 Guest are viewing this topic.

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Building a one row four stop
« on: March 18, 2019, 02:10:11 PM »

Ok I started this a while ago (years ago), things happen and other more important things need doing,
You know!
Well I’m going to have another go, so I had the box cut roughly, a finger board somewhat figured out, a bass end made, and a half arsed template for the fondo which I will be redoing using a tranfer I made of my Beltuna’s fondo. I’m using the Beltuna for a pattern for other parts also.

I just got my reed blocks glued up and will trim them to size.
Here’s what I did, glued one big panel using a jig I made then glued the two pieces down in the middle, my two standing blocks and the rest left over gives me the two lay down blocks.
I’m ordering ply to start the fondo next.
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Building a one row four stop
« Reply #1 on: March 18, 2019, 02:25:02 PM »

Here’s a shot of the other parts made.
buttons and pallet rods will be better, I promise!
Please note the mitred corners even on the bass end ;)

I’m actually not sure what the case wood is, it came from a table leaf that a customer was going to toss out. She said it was a walnut table, so maybe english walnut or butternut. Well aged anyway.
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Building a one row four stop
« Reply #2 on: March 18, 2019, 02:32:14 PM »

The wood might be mahogany.  To me it looks too red to be walnut.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Building a one row four stop
« Reply #3 on: March 18, 2019, 03:25:20 PM »

Yeah, it does look red in the photo, more reddish brown by my eye.
Most mahogany has a pretty open grain ( pores ) this wood is tighter.
I’ve gone though this wood chart I have, the grain is more like a walnut, it’s not black or butternut looking at samples. I don’t have English walnut on it to compare.
I add a couple for comparison
Left to right :  blackwalnut ,mahogany , butternut , narra from the Philippines
And African cherry on top (sideways card ).  (:)
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Building a one row four stop
« Reply #4 on: March 19, 2019, 09:32:44 PM »

 When I need bellows,  does Igor Å olinc have a contact info anyone?
The links I’ve tried here are not working.
I could try though EBay, I suppose.
Thanks

Edit: to remove to many questions. Anyone on the above?


« Last Edit: March 22, 2019, 09:07:08 PM by boxcall »
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Building a one row four stop
« Reply #5 on: March 29, 2019, 10:09:26 PM »

Bump , anybody on the last post would be helpful. (:)
Thanks!

I have the fondo/1/8” ply and cut it to fit the casework. Yay! Photo added to show where its at.
Buggered up one short side of casework when cutting the dado for the ply, luckily I had a spare.
I thinking of doing a thumb groove on the back edge of an extension piece on top of keyboard.
That’s where I have it.  (:)

I’ll be doing the base side plate first ( drill holes and some fret work to square air hole) it’s easier  ;)
Then I’ll do the treble side plate/ fondo, slides? ,reed plate etc. , wish I had a CNC machine!!
I’m trying to copy the beltuna layout of holes, easy on the base, not so much on the treble. The holes are square 3/8” wide , maybe slightly less on the side ( measurement) that runs parallel to long side of slide. If that’s understandable? I’m thinking this is needed so that the slide can close off the space.
I’m debating on round holes or square, round would be easy to do and must seal better when slides are closed, less area where air can get though I’d think. Then I could do it with a jig on my drill press.

My other option would be drill then carefully cut the corners square.
I was thinking if I go this route then maybe get some premade metal slides ( if I can find them) with a hole size to match these measurements needed.

Any Ideas are welcome.

Also
Beltuna fondo is 3/16” thick, I am using 1/8” thick aircraft ply. Should I be adding a layer of 1/16” ply?
I’m not sure if this was done so it had a walnut finish on the outside with grain running top to bottom, on the inside it runs side to side, so opposite. Better strength on the short run.

More to come!!
Questions that is! Reeds!


« Last Edit: March 29, 2019, 10:11:52 PM by boxcall »
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Building a one row four stop
« Reply #6 on: March 29, 2019, 11:33:48 PM »

Another interesting thing about the Beltuna is reed block construction on the bass side, not unusual maybe?
A solid piece of wood is use for bass chord reed block made of hardwood.
Bass reed block is again one piece of wood for each reed block made to a different thickness then (sized out on the inside to accommodate reed ) mount to plate, made of pine.
Wonder why the change in woods for the chord block?

Edit to add photo of blocks
« Last Edit: March 30, 2019, 01:02:28 AM by boxcall »
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Building a one row four stop
« Reply #7 on: March 29, 2019, 11:36:20 PM »

For cutting your fondos and slides you might be able to find a makerspace that has a laser cutter or concert router that you can use.  Laser cutter would be first choice.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Building a one row four stop
« Reply #8 on: March 30, 2019, 12:37:44 AM »

I’ve looked into them online, there’s a couple around that could have the cutter available for a join up fee. Or maybe go to several meetup nights with beer? I would join but they are not close enough to use beyond this one time. Plus I’d have to go back and forth to check out what they have etc.

It’s a good thought, so I have to think on it.
Good part would be, I could make an extra one ;)
« Last Edit: March 30, 2019, 12:41:45 AM by boxcall »
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Building a one row four stop
« Reply #9 on: March 30, 2019, 08:26:41 AM »

Once you have the design work done you can make as many as you like.
There may even be a commercial laser cutting service you could use that would not require you to visit and could send you the parts by mail.  They wouldn’t have to be anywhere physically close.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Henry Piper

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 368
Re: Building a one row four stop
« Reply #10 on: March 30, 2019, 11:25:16 AM »

When I need bellows,  does Igor Å olinc have a contact info anyone?
The links I’ve tried here are not working.
I could try though EBay, I suppose.
Thanks

The email I have is;-   vsezaharmoniko@gmail.com

His postal address is:-
Spletna Trgovina Za Harmoniko Igor Solinc
Poznica 6
3270 Lasko
Slovenija.
Hope this helps.   Henry.
Logged
From Ottery St Mary Devon. Currently Playing Dino Baffetti BP2 in D/G, Hohner Student 1 P.A conversion  in D/G,  Hohner 3515 Pre-Pokerwork in A/D,   2 row "Beaver Brand" in Bb/Eb, Hohner Pre- Erica in G/C .  Single row permanent 4 voice, 4 bass in C from old Hohner single row and bits of a cheap Cajun box !!,

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Building a one row four stop
« Reply #11 on: March 30, 2019, 10:43:02 PM »

When I need bellows,  does Igor Å olinc have a contact info anyone?
The links I’ve tried here are not working.
I could try though EBay, I suppose.
Thanks

The email I have is;-   vsezaharmoniko@gmail.com

His postal address is:-
Spletna Trgovina Za Harmoniko Igor Solinc
Poznica 6
3270 Lasko
Slovenija.
Hope this helps.   Henry.

Thanks Henry!
I’ll try the Email  :||:
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Building a one row four stop
« Reply #12 on: April 04, 2019, 11:06:38 PM »

Bass side reed blocks and fondo cut, I still need to glue it all up, its loose at the moment:)
I made the bass side reed block out of a solid block of wood ( why?) just for the fun of it and used what was on hand as far as thickness and size, so the different wood types. They need a little fine tuning on the corners and edges still, I did them with a drill press with a 9mm bit cutting just shy of the line to clean up, may just require a light touch around the edges.
I’ll be opening the air hole slightly by making it square. Blah blah blah..

Progress though:)
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

komat

  • Eastcoaster
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 228
Re: Building a one row four stop
« Reply #13 on: April 18, 2019, 08:18:42 PM »

How/where did you get that jig made up for the reed blocks? Looks similar to one Pariselle uses.
Logged
Too many accordions, help!

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Building a one row four stop
« Reply #14 on: April 18, 2019, 11:14:16 PM »

I made the jig , pretty much 8) a copy of the Pariselle jig.
Mine is just grooved plywood then I spray painted it, so the glue wouldn't stick to it as easy.
I also cut little blocks that fit between the pieces to keep it all straight, I left them just short of the end so they did not get glued in ;)

update: I'm in the process of buying some reeds, Yay!  A mano Bb

Also with the help of a fellow member, working on the treble fondo, I'll keep you posted.


Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Building a one row four stop
« Reply #15 on: April 23, 2019, 04:47:41 PM »

I just got the Rees reeds I need for this project. I bought these from a fellow member, thank you!
I wasn’t sure of the maker but knew they are good Italian made Amano reeds. The key was not ideal but will be fine, I think starting with good reeds will be a plus. The maker turns out to be Cagnoni another plus, I think.

I was surprised (a bit) by the size difference of some reeds, the big bass reed is shorter than the one in my Beltuna in D by about 10cm and it’s much thicker. All the bass blocks need a small filler or I make new.
The chord block and reed fit was pretty close. Fractionally to big.
The M flat reed bank is really close in size to my D box measurements and fits within the case but the H reeds may / will require a notch in the side of case to fit them at the top end. My D box does not have them notched in there.
There’s not a lot of room in there!

As I said before a fellow member is helping me with the fondo/ sound bd., it’s looking good!
I do see a possible problem with using a square hole versus a round hole, if one was going to make the slides with plywood. My first thought was that I would be able to find a metal one to fit my application, apparently not so easy. There’s not much material left on the slide after you cut a square hole and its thin the full length of the hole, so if wood this would be a weak point. Maybe this is why most of the Cajun makers use a round hole, I think that’s what they do on the “melodeon making course”.
I had the link to the course photos but can’t find it now. :(

Anyone know if metal slides can be had?

One more question on button size my beltuna is 13.8 mm , what size do others use?
Maybe someone will be kind another to measure one (:)

Thanks all!

Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Building a one row four stop
« Reply #16 on: April 23, 2019, 06:58:17 PM »

Many if not most older German boxes had rectangular holes and slides of solid wood.  If you don't find ready-made metal slides, it shouldn't be too hard to make some from aluminum sheet.

Button diameters, from my own project notes: 11.5 mm on 2 older boxes (an Eagle Brand and a Globe Special), 12.4 mm on a Messervier and 12.6 on an Acadian. I used 12mm buttons from Charlie Marshall.
Logged

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Building a one row four stop
« Reply #17 on: April 24, 2019, 02:17:32 AM »

12mm sounds good.
Thanks
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

folkloristmark

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 582
    • street entertainers
Re: Building a one row four stop
« Reply #18 on: April 24, 2019, 10:25:24 AM »

Ok. I dont know were you are or if they are any good to,you maybe someone knowledeable can advise? I have the remains of a PS BCC# . Its in France I sold the reeds to a melnet member some time a go. I have used most screws some buttons and springs but I do recall it having long thin brass metal strips with square holes in the coupler (7?) system . You would need to check the spaceing I see you have a PS. You can always cut the lenghts. If any good then I will post. Not anywere near the box untill early May.
Best whishes
Logged
Mark Taylor
Folkloristmark

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Building a one row four stop
« Reply #19 on: April 26, 2019, 03:05:26 AM »

Thanks Mark!
I’m on Cape Ann just north of Boston ma.
I’d need something 1/16”or 1.5mm thick for the slides then the hole size about 9.5mm square.
Probably a tall order.
I may just cut them out of wood a see what they feel like.


Reed block tapering jig, used in combination a with router sliding over the surface.
Two reed blocks at once, raised on small end amount of taper.
Worked good for the flat mounted blocks, I may need to start over on one of the standing blocks:(

I tried this taper on the table saw with the blade up 2.5 inches , its a bit scary ( even with push blocks) and I need my fingers, so I went this route.
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D
Pages: [1] 2 3 4 5 6 ... 13   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal