Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 2 3 4 5 [6] 7 8 9 10 11 ... 13   Go Down

Author Topic: Building a one row four stop  (Read 47307 times)

0 Members and 1 Guest are viewing this topic.

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Building a one row four stop
« Reply #100 on: February 28, 2020, 04:59:19 PM »

thanks Lester
I'll use your clamp method, kinda what I was thinking as well.
what is the paper towel being used for in the photo?
is it for added pressure in that area, I can't imagine its for catching glue.
It's actually greaseproof paper, the picture is from when I was retaping bellows. I put greaseproof between the bellows folds to catch any glue seepage to prevent bellows folds sticking together.

playandteach

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3526
  • Currently a music teacher in a high school.
Re: Building a one row four stop
« Reply #101 on: February 28, 2020, 05:25:26 PM »

thanks Lester
I'll use your clamp method, kinda what I was thinking as well.
what is the paper towel being used for in the photo?
is it for added pressure in that area, I can't imagine its for catching glue.
Looks to me that it's baking paper to stop something recently glued from sticking its neighbour.
EDIT Whoops, already answered by the horse's mouth.
Logged
Serafini R2D2 GC, Serafini GC accs 18 bass

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Building a one row four stop
« Reply #102 on: February 29, 2020, 01:53:16 AM »

thanks Lester
I'll use your clamp method, kinda what I was thinking as well.
what is the paper towel being used for in the photo?
is it for added pressure in that area, I can't imagine its for catching glue.
It's actually greaseproof paper, the picture is from when I was retaping bellows. I put greaseproof between the bellows folds to catch any glue seepage to prevent bellows folds sticking together.
I see, I should have known you’d be multitasking. ;)
Thanks

Today’s job: glue in the reed blocks, no sticking 8) I ended up doing half or one side at one time, which gave me a chance to pull the slides back out and wipe clean during the first part. Half the chance of sticking.
I also got the keyboard finish minus the cover trim pieces.

Trim pieces are birch like the plate, which I could leave as is or I may try making them black.
« Last Edit: February 29, 2020, 01:57:27 AM by boxcall »
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Building a one row four stop
« Reply #103 on: February 29, 2020, 01:55:57 AM »

Reed blocks
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Building a one row four stop
« Reply #104 on: March 01, 2020, 01:36:16 PM »

Plan B
For covering the pallets I decided to use a thin strip of the material in which the pallets are made from.

I think if I was to do this again ( please talk me out of it!  ;) ), the keyboard I would do different , with an open back.
Only because the levers are not removable unless the button comes off.
I believe they are easier to remove with open back keyboard.

I also finished gluing the bellows to the frames , with success, thanks Lester
« Last Edit: March 01, 2020, 01:38:00 PM by boxcall »
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Building a one row four stop
« Reply #105 on: March 01, 2020, 02:03:35 PM »

I think if I was to do this again ( please talk me out of it!  ;) ), the keyboard I would do different , with an open back.
Only because the levers are not removable unless the button comes off.
I believe they are easier to remove with open back keyboard.
Either an open (removable) back, or preferably a removable top plate.
Are you saying that now, even if you remove the two screws at the edge of the keyboard, the front assembly does not come off because the buttons are in the way? Are the buttons now glued in place?

If you could possibly contemplate the modification, would it be possible to replace your existing keyboard top plate with one which screws into place at each end? It might save you future heartache to do this sooner rather than later.

I've attached a couple of photos to show my one-row ('Golden Box' due to the nice cherry wood which Emmanuel Pariselle sourced). You can see the removable top plate and how, when removed, it gives you access to the levers, in this case to install a green felt buffer under the levers.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Building a one row four stop
« Reply #106 on: March 01, 2020, 02:44:40 PM »

I think if I was to do this again ( please talk me out of it!  ;) ), the keyboard I would do different , with an open back.
Only because the levers are not removable unless the button comes off.
I believe they are easier to remove with open back keyboard.
Either an open (removable) back, or preferably a removable top plate.
Are you saying that now, even if you remove the two screws at the edge of the keyboard, the front assembly does not come off because the buttons are in the way? Are the buttons now glued in place?

If you could possibly contemplate the modification, would it be possible to replace your existing keyboard top plate with one which screws into place at each end? It might save you future heartache to do this sooner rather than later.

I've attached a couple of photos to show my one-row ('Golden Box' due to the nice cherry wood which Emmanuel Pariselle sourced). You can see the removable top plate and how, when removed, it gives you access to the levers, in this case to install a green felt buffer under the levers.
Yes, yes and maybe next time or if I find I need to.

Keyboard assembly comes apart but you can't remove the levers with out popping off a button
the dark strip of wood above the levers, gets in the way as its part of the lower section,
standard cajun style assembly now, and I don't think you can remove the levers on them.


That open front face style in your photo would work too.


Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Building a one row four stop
« Reply #107 on: March 01, 2020, 03:52:08 PM »

I was just recently faced with an issue involving a keyboard built like yours where removing the keys was not possible without removing the buttons (which were glued on). I echo Steve’s advice wholeheartedly, although I realize it may be too late now. Most cajun boxes are built with keyboard that come apart, btw - they are neither like yours or Steve’s Pariselle..the edge of the keyboard is screwed on to the main keyboard assembly and can pop off around the buttons.

Looks good, though!
Logged
C#/D player

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Building a one row four stop
« Reply #108 on: March 01, 2020, 03:59:45 PM »

Another reason you will want the keyboard components removable is so that you can fix any issues that arise if keys begin to stick with changing environmental conditions.  The Beltuna one-rows are notoriously bad for this - every single one that I've tried has suffered from this at one time or another.  Many Quebec box makers are actually making the keys out of some kind of composite material that does not shrink or expand, and then covering it over with a veneer (or in the case of many Quebec-made one-rows, they make a closed keyboard).
Logged
C#/D player

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Building a one row four stop
« Reply #109 on: March 01, 2020, 04:53:58 PM »

Most cajun boxes are built with keyboard that come apart, btw - they are neither like yours or Steve’s Pariselle..the edge of the keyboard is screwed on to the main keyboard assembly and can pop off around the buttons.

Looks good, though!

I started this box using a cajun box plan, it does come apart, top of keyboard comes away from bottom half.
I think most cajun makers add a decorative strip across the top of the base part of the keyboard that blocks the levers from coming out, I’d like to see a picture of what you mean.

If I had stuck to the original sized buttons on the plan they would have come out.
« Last Edit: March 01, 2020, 10:46:52 PM by boxcall »
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Building a one row four stop
« Reply #110 on: March 01, 2020, 08:40:33 PM »

Bass side pallet in , bass side attached to plate and everything screw together.
I will need to install the gaskets.
Finish the stops ( i’m Waiting for delivery of a few final bits)

Starting to look like something
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: Building a one row four stop
« Reply #111 on: March 01, 2020, 09:23:13 PM »

That looks bonny. (Where's the drool emoji?)
Logged

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Building a one row four stop
« Reply #112 on: March 01, 2020, 10:52:24 PM »

That looks bonny. (Where's the drool emoji?)
Thanks Peadar

I‘m shooting for looking acceptable and more importantly functionality.
Hopefully after I put the Amano reeds in we’ll need the drool 🤤 emoji!!
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Building a one row four stop
« Reply #113 on: March 02, 2020, 04:57:55 PM »

Quote
I think most cajun makers add a decorative strip across the top of the base part of the keyboard that blocks the levers from coming out, I’d like to see a picture of what you mean.

The strip may or may not be decorative, but it is also structural - to help prevent the keyboard base from warping over time.  Older boxes had scissor-type springs fitted behind the keys so the web left at the back of the keyboard was not all that thick.  Also, on some keyboards part of the slot for each key was made wider to facilitate access to the spring.  The strip covered that too.
Logged

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Building a one row four stop
« Reply #114 on: March 03, 2020, 08:41:30 PM »

Looks great! Regarding the silver buttons, one thing that might be worth considering is that some people (myself included) find those cylindrical buttons a little less conducive to sliding your fingers along. Depending on your style of play, I find the squared edges can sometimes trip you up a bit. If you look at most Irish-style boxes, the buttons tend to be rounded near the edge to help facilitate sliding along the keyboard.

Nice work!
Thanks , I pretty much was getting what was available at the time for buttons they not quite as big as my beltuna’s buttons. As for rounded edge I’m not finding it to bad , I started playing on a box with tiny buttons that were not rounded.
I’m not even sure how I will tune this box being that its Bb reeds. Maybe not the best key for Irish anyway.
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Building a one row four stop
« Reply #115 on: March 03, 2020, 08:47:38 PM »

Quote
I think most cajun makers add a decorative strip across the top of the base part of the keyboard that blocks the levers from coming out, I’d like to see a picture of what you mean.

The strip may or may not be decorative, but it is also structural - to help prevent the keyboard base from warping over time.  Older boxes had scissor-type springs fitted behind the keys so the web left at the back of the keyboard was not all that thick.  Also, on some keyboards part of the slot for each key was made wider to facilitate access to the spring.  The strip covered that too.
Yes I can see it adding to structure and keeping things in line.
And your right it may or may not be decorative.
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Building a one row four stop
« Reply #116 on: March 03, 2020, 08:59:10 PM »

So I used pocket hole screws for the frames (2.5” long modified) they have a built in washer and the fact that there’s no thread on the upper part makes them ideal for drawing the ends together.
I also got my gaskets install and screwed the units together.
I also installed the slider blocks.

Similar to the last one but you can see the screws.

Carpenters favorite saying .... getting there, a couple more weeks ;)
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Building a one row four stop
« Reply #117 on: March 04, 2020, 12:06:22 AM »

It is looking very fine!  (:)

I’m not even sure how I will tune this box being that its Bb reeds.
I'm not sure I understand your comment. I assume that your reeds are basically pre-tuned to a scale of Bb major with a 3rd button start. So your notes should be these:
http://www.forum.melodeon.net/files/site/keyboards/1%20Row%204%20Stop%20-%20Bb.jpg

Fine-tune your L, M and H reeds to octave unisons first of all. Leave the M+ reeds until last and then tune them a bit sharp, depending on how much tremolo you want between the M and M+ reeds.

Tuning the M+ reeds to be 4 cents sharp across the entire range will give you a pleasant tremolo, but not too much, yet will have a rich sound when all four banks of reeds are sounding. If you want less tremolo, gradually reduce the amount of sharpness on M+ reeds as you go up in pitch. But beware that anything less than 2.5 cents offset on the highest two or three M+ reeds risks accoustic 'locking-in' the M and M+ reeds together to give a 'false unison'.

You can use the instrument's own bellows suspended by a couple of strips of plywood to form a very good tuning bellows in order to accurately tune the reeds in situ in the instrument - the best way. I'm sure there are descriptions and photos on this forum somewhere which describe this method.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Building a one row four stop
« Reply #118 on: March 04, 2020, 01:01:50 AM »

Sorry, I should have been more clear , yes Bb key 3rd button start, but I was thinking more in terms of cajun tuning or ET. And how I will use it etc.

I did make a tuning jig as you described for a similar box , if I decide to tune it, probably not though.
The reeds are to good for me to mess them up :o
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Building a one row four stop
« Reply #119 on: March 04, 2020, 07:33:01 AM »

Sorry, I should have been more clear , yes Bb key 3rd button start, but I was thinking more in terms of cajun tuning or ET. And how I will use it etc.

OK thanks for the clarification. (:)

If you are not quite sure of what type of tuning you will eventually settle on, my advice would be to go for ET first of all. If you have bought pre-tuned new reeds, they will almost certainly be around 10 cents sharp. So any tuning you or someone else does will involve flattening the reeds.

Tuning to ET will involve the least amount of flattening, and you could hear what the box is going to sound like and would also be good for general purpose playing in all genres, especially Irish, Quebecois, English, etc. Even Cajun, although it might not sound completely authentic.

A modified compromise for ET vs Cajun tuning can be achieved by tuning the third (D) and seventh (Eb) notes in the scale about 5 cents flat from ET. This will make the keyboard intervals sound sweeter (especially the major thirds) yet still not be so far from ET that it sounds 'odd' when playing non-Cajun music.

Full Cajun tuning goes a significant step further in flattening the thirds to be about 15 cents flat from ET and the sevenths about 8 - 10 cents flat (I think; not quite sure about that).

So if you tune to Cajun tuning and then subsequently change your mind, it is more of a trauma for the reeds to be sharpened back to ET or near. If they are good quality reeds, it shouldn't present too many problems but it is still removing metal from the reeds when perhaps you didn't need to. With the tiny H reeds especially, there is even less margin for error and/or change, as the metal at the tip of the reeds is very thin and delicate.

Overall, therefore, if you're not sure about how you will most use the instrument, rather than going for full Cajun tuning immediately, I would recommend going via steps ET --> modified ET --> Cajun, taking some time (days, weeks?) at each stage playing and getting used to the sound of the instrument and how it suits your needs.

Quote
I did make a tuning jig as you described for a similar box , if I decide to tune it, probably not though.
The reeds are to good for me to mess them up :o

If you put as much care into working with the reeds as you have done in making the instrument, I should think you will be OK, especially if you can practise on an old clunker of a box beforehand.

Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk
Pages: 1 2 3 4 5 [6] 7 8 9 10 11 ... 13   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal