Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 2 3 4 5 6 [7] 8 9 10 11 12 13   Go Down

Author Topic: Building a one row four stop  (Read 47430 times)

0 Members and 2 Guests are viewing this topic.

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Building a one row four stop
« Reply #120 on: March 08, 2020, 09:06:04 PM »

Thanks Steve, I appreciate your help!

For those with Instagram ( #LarkAccordions ) for some sound of bass reeds installed.
Bass reeds are wax in they sound great , they will need final tuning.
I got the shanks for stops installed, everything slides, Phew!!
I’m sure I will be chasing some leakage/ slash adjusting the spring tension, etc.
So next I will need to finish installing the treble reeds.

I would also recommend this tool for waxing, Walnut hollow ( creative versa tool )
It’s meant for wood burning but can also be used for soldering.
It has a variable temp control built in and I was using the shading tool ( spatula shape) for waxing it worked great. Temp control on the cord is a bit of a bad design though,  Its not far enough away from the tool.
You can adjust this tool to the point of almost no smoke ( only when you pull it away does it smoke a bit ). Edit : I’m using a venting system.
No connection.
I bought it to maybe burn in a design, we’ll See.

Getting there!!!
« Last Edit: March 08, 2020, 09:13:59 PM by boxcall »
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Building a one row four stop
« Reply #121 on: March 08, 2020, 11:37:37 PM »

Can you share a photo of your waxing tool?
Logged
C#/D player

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Building a one row four stop
« Reply #122 on: March 09, 2020, 12:02:11 AM »

Yer tis, direct from eBay:
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Building a one row four stop
« Reply #123 on: March 09, 2020, 12:33:42 AM »

That’s it, although I got mine from the another place , shame on me ...  no really!!
Like i said I bought for the wood burning.
I used this attachment shown and here the results, I found the hard part is to get the case in the right position to flow the wax, practice.

Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Building a one row four stop
« Reply #124 on: March 09, 2020, 07:24:23 AM »

Sorry to put a dampener on things, but I thought you were going to use screws to hold the reed plates in place, mounted on olovisc gaskets. It's perhaps not so important for the bass/chords reeds where you have easy access and the reeds are relatively large - tuning is straightforward.

But for the treble end, I really would recommend screws on gaskets and no wax at all.
(a) the reeds are easier to fit and the positioning can be easily adjusted.
(b) the reed plates can be removed easily and flipped where necessary to assist tuning. This is particularly advantageous for tuning the underneath (pull) reed tongues on the very highest piccolo H reeds. You can just flip the reed plate, sharpen or flatten the reed by the required amount, then re-flip the reed plate again. This significantly lowers the risk to those very delicate reed tongues which could otherwise be damaged by attempting to lift the reed tongues through the reed plate slot.

Also, the agreed wisdom is that screwed-in reeds have a stronger, more focussed sound than waxed-in reeds. 
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Building a one row four stop
« Reply #125 on: March 09, 2020, 08:12:36 AM »

Certainly it’s more convenient in some ways to have screws to hold reeds, but I don’t know about “agreed wisdom” that screwed reeds give a better sound.  Do you  know of any direct comparisons Steve?   
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Building a one row four stop
« Reply #126 on: March 09, 2020, 08:54:45 AM »

Surely it depends on personal preferences? A gasket between reedplate and block (IMHO) would take the edge off both volume and stridency, as opposed to plates being screwed directly to the wood, wax could then simply seal the joint without making a jot of difference. Plates which were only waxed in would, again IMHO, produce a noticeably softer sound.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Building a one row four stop
« Reply #127 on: March 09, 2020, 08:57:31 AM »

Surely it depends on personal preferences? A gasket between reedplate and block (IMHO) would take the edge off both volume and stridency, as opposed to plates being screwed directly to the wood, wax could then simply seal the joint without making a jot of difference. Plates which were only waxed in would, again IMHO, produce a noticeably softer sound.
Surely it depends on personal preferences?
Not really it all depends on science and could be tested but as far as I know no one has ever carried out a test, certainly not a scientific one (double blind etc) to prove/disprove any of these opinions/suppositions.

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Building a one row four stop
« Reply #128 on: March 09, 2020, 09:31:38 AM »

Certainly it’s more convenient in some ways to have screws to hold reeds, but I don’t know about “agreed wisdom” that screwed reeds give a better sound.  Do you  know of any direct comparisons Steve?

No, I don't have direct comparisons which I can share, but there is the accummulated 'wisdom' ( = opinions  :o ) on this forum that screwed or nailed reeds do have a more focussed sound (notice I didn't say 'better', either now or in my previous post). I think a forum search would reveal more. Possibly it's similar to the debate about whether different sorts of timber make a difference to the sound, and we've all seen that discussion many times!

However, I can say that my one-rows which have screwed reeds on to olivisc gaskets can knock sparrows off perches at 200 yards if need be.

A gasket between reedplate and block (IMHO) would take the edge off both volume and stridency, as opposed to plates being screwed directly to the wood, wax could then simply seal the joint without making a jot of difference. Plates which were only waxed in would, again IMHO, produce a noticeably softer sound.
The olovisc gasket is quite thin and compresses nicely to stop air leaks. But the screws conduct the sound vibrations through the gaskets into the wood of the reed blocks, so I don't think the gaskets have much of a muting effect, if any.

'...plates being screwed directly to the wood, wax could then simply seal the joint without making a jot of difference.'
But where working room can be restricted (as in a one-row four-stop) why faff about with wax (especially in a restricted space) when gaskets are easy to apply, do the job perfectly and allow for all the convenience of repositioning, flipping of reeds for fine tuning, etc.? Screwed/nailed reeds on olovisc gaskets is a proven technique which works very well indeed.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Building a one row four stop
« Reply #129 on: March 09, 2020, 11:06:37 AM »

Sorry to put a dampener on things, but I thought you were going to use screws to hold the reed plates in place, mounted on olovisc gaskets. It's perhaps not so important for the bass/chords reeds where you have easy access and the reeds are relatively large - tuning is straightforward.

But for the treble end, I really would recommend screws on gaskets and no wax at all.
(a) the reeds are easier to fit and the positioning can be easily adjusted.
(b) the reed plates can be removed easily and flipped where necessary to assist tuning. This is particularly advantageous for tuning the underneath (pull) reed tongues on the very highest piccolo H reeds. You can just flip the reed plate, sharpen or flatten the reed by the required amount, then re-flip the reed plate again. This significantly lowers the risk to those very delicate reed tongues which could otherwise be damaged by attempting to lift the reed tongues through the reed plate slot.

Also, the agreed wisdom is that screwed-in reeds have a stronger, more focussed sound than waxed-in reeds.
I went with wax because I was not able to get screws ( without buying 500) and I wasn’t sure if I had the space required for the thickness of the gasket ( without removing material from the reed block).

As it is now I can just get the reeds in the standing blocks, just sliding past the laying down blocks, and there was material removed from both sides of the case/frame so that the laying down reeds could fit.

Also I’m using poplar for the reed blocks , a hardwood but on the softer side, so not knowing how well the screws would hold etc.

Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Building a one row four stop
« Reply #130 on: March 09, 2020, 11:41:26 AM »

Although it's too late to make any difference, poplar is quite tough and takes screws well if predrilled.

I'm fascinated by this thread and thank you for all the detailed photos. Your workmanship is excellent and it looks like you'll end up with a lovely instriment.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Building a one row four stop
« Reply #131 on: March 09, 2020, 12:21:39 PM »

Although it's too late to make any difference, poplar is quite tough and takes screws well if predrilled.

I'm fascinated by this thread and thank you for all the detailed photos. Your workmanship is excellent and it looks like you'll end up with a lovely instriment.
Thanks Pete,
I’m pretty familiar with poplar and it’s quality’s but not the screws used in this case, Size wise.
I’m sure they would work and it came to space available really.

Thanks for the compliment on my workmanship , its not prefect, good carpenters know how to fix mistakes  ;)

I order metal corners for this box but I kinda like it without them, so I may not use them, subject to change.....  8)
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Building a one row four stop
« Reply #132 on: March 09, 2020, 01:14:19 PM »

Photo of the inside


I was at my M&D’s house helping them clear out stuff and came across a piece of Birdseye maple with what appears to be some tiger stripping along both edges.
The piece is about 3’ long 1 3/4” thick and 10 1/2” wide, wonder what I could do with it!

Dad got it from a neighbor with a bunch of other wood and stuff, its been sitting there for about fifty years now.
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

Pearse Rossa

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 723
Re: Building a one row four stop
« Reply #133 on: March 09, 2020, 07:01:24 PM »

Like i said I bought for the wood burning.

Has that yoke got a flame shooting out of it? Please tell me that is not a flame!
Logged

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Building a one row four stop
« Reply #134 on: March 09, 2020, 09:48:29 PM »

Like i said I bought for the wood burning.

Has that yoke got a flame shooting out of it? Please tell me that is not a flame!
No flames it’s the copper shading tool.

I got the treble MM reeds in today, they are all sounding ,although sounding sharp in the box .
Video of the sound.
https://www.youtube.com/watch?v=i_N2RppU5yY&feature=youtu.be

I will need to tighten one spring or reset the pallet on one button, leaks a little on the pull.
And readjust the spring on the chord button as it leaks a tad also.
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Building a one row four stop
« Reply #135 on: March 09, 2020, 10:14:38 PM »

I got the treble MM reeds in today, they are all sounding ,although sounding sharp in the box .
Video of the sound.
https://www.youtube.com/watch?v=i_N2RppU5yY&feature=youtu.be
"Video unavailable
This video is private."
 :(
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Pearse Rossa

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 723
Re: Building a one row four stop
« Reply #136 on: March 09, 2020, 11:16:56 PM »

...But for the treble end, I really would recommend screws on gaskets and no wax at all...
... This is particularly advantageous for tuning the underneath (pull) reed tongues on the very highest piccolo H reeds. You can just flip the reed plate, sharpen or flatten the reed by the required amount, then re-flip the reed plate again. This significantly lowers the risk to those very delicate reed tongues which could otherwise be damaged by attempting to lift the reed tongues through the reed plate slot.

That's a good idea actually. You could apply that logic to any box.
I find those small reeds are the most difficult to work on, especially their setting.
Logged

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Building a one row four stop
« Reply #137 on: March 09, 2020, 11:25:32 PM »

I got the treble MM reeds in today, they are all sounding ,although sounding sharp in the box .
Video of the sound.
https://www.youtube.com/watch?v=i_N2RppU5yY&feature=youtu.be
"Video unavailable
This video is private."
 :(
try this one

https://www.youtube.com/watch?v=xSPVKuqXhOo&feature=youtu.be
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Building a one row four stop
« Reply #138 on: March 10, 2020, 08:12:01 AM »

try this one
https://www.youtube.com/watch?v=xSPVKuqXhOo&feature=youtu.be
Great stuff! Well done!
I shall look forward to hearing the full 4-voice sound in due course.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Building a one row four stop
« Reply #139 on: March 11, 2020, 12:39:23 AM »

try this one
https://www.youtube.com/watch?v=xSPVKuqXhOo&feature=youtu.be
Great stuff! Well done!
I shall look forward to hearing the full 4-voice sound in due course.
Thanks,
I got the reeds finished ,waxed in, I still need to tune it of course and one H reed valve is hanging up on the pull so I guess I’ll need to pull that reed and fix it. I’m finding a quick slide of a balde along the reed and it pops right out, probably a little sticker than with the gasket method.
But I suppose you could flip it and tune it just the same way.

I’m finding most reeds to be sharp in the box ( average maybe 6 or 7 cents across all banks but the M reed bank that is standing)? They were about 3 or 4 cents on the table but I didn’t check all, just a few.
The M standing reed is a head scratcher,  turning out to be even sharper than the rest maybe 15 cents.
I’m wondering if the fact that I had to open up the back of that chamber to expose the complete hole ( divider was covering part of it) would change things. So air flow direction changes a bit?

Also how often do you install reeds only to find the factory slash mark is on the wrong side on one?
I had a high A# reed on the low bank of reeds mark on the wrong side, s I needed to flip it.

I ended up not doing any wax on the bass of standing blocks ( I ‘m pretty sure that’s how Beltuna is done) all is working and this wouldn’t explain any difference mentioned above. I could still dump some in if needed ;) I also didn’t flip any high reeds, all sound easily so I guess its not needed.

I also fix the chord reed spring ( tightened it) and fix the one pallet that was leaking ( just a matter of popping off the thin cover , and pulling the pallet ( clean up ) and refit. Well there was a couple of cuss words for good measure.

I finished  adding the bellow straps also.
I’ll try some pictures / sound later.

Really just needs a good tuning (:) I was hoping to get this done, before I become and old man, turning the big 60 this year.

Edit : Oops also when I said A# I meant Bb :o
« Last Edit: March 11, 2020, 12:50:53 AM by boxcall »
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D
Pages: 1 2 3 4 5 6 [7] 8 9 10 11 12 13   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal