Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 ... 6 7 8 9 10 [11] 12 13   Go Down

Author Topic: Building a one row four stop  (Read 47361 times)

0 Members and 1 Guest are viewing this topic.

mselic

  • Hero Member
  • *****
  • Online Online
  • Posts: 1683
Re: Building a one row four stop
« Reply #200 on: June 24, 2020, 10:02:40 PM »

Congratulations!
Logged
C#/D player

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Building a one row four stop
« Reply #201 on: June 24, 2020, 10:06:21 PM »

Congratulations!
thanks Matt !! It would sound better with a player , like yourself!

Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Building a one row four stop
« Reply #202 on: June 25, 2020, 12:27:39 AM »

Nice work.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Building a one row four stop
« Reply #203 on: June 25, 2020, 01:06:54 AM »

Nice work.
Thank you sir, I wouldn’t have been able to do this without the help of all the pros here and the one row building course pictures were a big help also !!
A special thanks to the member who help with the fondo /slide cut out work, it worked great!!
And I have a spare ;)  I owe you a couple beers for sure, thank so much Howard it was very kind of you!

I definitely owe you ALL for your help getting me “into” to this melodeon thing!!
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Building a one row four stop
« Reply #204 on: June 25, 2020, 08:11:48 AM »

Well done Boxcall - that is a great achievement of which you can be justly proud!  :|glug
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Building a one row four stop
« Reply #205 on: June 25, 2020, 07:39:09 PM »

Well done Boxcall - that is a great achievement of which you can be justly proud!  :|glug
Thanks Steve and thanks for all your help !!
It was quite a journey that took forever, I didn’t climb to the top of the highest mountain but feel like I climbed a mountain  ;) and I’m very happy for that.

Might have to climb again someday if I get the urge......
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Building a one row four stop
« Reply #206 on: October 12, 2020, 11:25:33 PM »

Follow up on this project
I’m happy with everything about this box, only thing is, I think to much pallet lift may not be so good.
I’m finding it causes to much noise ( the higher they lift the harder they fall) upon return.
I didn’t notice this as much until I did some recordings and heard it more clearly.
I checked this box to the lift on my Beltuna pallets and it’s definitely more.
So I guess an adjustment is needed, lowering the buttons slightly also at the same time as mselic suggested earlier.
Probably pretty common to have to work out some bugs, I’ll need to pull the pallets and readjust the pallet arms shortening the travel, this should lower buttons at the same time ( i think), will this tighten the springs also?    I think it does but just want confirmation.
Hope I don’t break anything in the process  :||:
Any other problems I should think about ? Changes tuning etc.
I’m in no hurry to do it maybe over the winter when I could find time.
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Building a one row four stop
« Reply #207 on: October 13, 2020, 12:48:56 AM »

If your pallet lift is too high, I would recommend adding a felt buffer inside the keyboard assembly, underneath the wooden levers, if this is possible in your construction method. This will limit the button travel and therefore the return velocity, and hence should reduce the return 'slap' noise.

See attached photo of my 1-row keyboard assembly with a green felt buffer in place. In my case the felt is about 5 mm thick, and quite firm. Usually the felt is readily available from piano tuners' supplies (google). Charlie Marshall also has this felt which (he says) is obtainable in various thicknesses; you'd need to contact him. You can always add two layers of thinner felt if needed.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Building a one row four stop
« Reply #208 on: October 13, 2020, 02:34:05 PM »

Thanks Steve
I have 2 layers in there already and I can just barely get the buttons and pallets passed it when assembling. And even if I did, this would leave my buttons slightly proud of keyboard when pressed down. I’ll probably bend curing two problems ( buttons are slightly high and the pallet lift) maybe three ( springs could be a tad tighter).
Hopefully I’ll return with good news (:)
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Building a one row four stop
« Reply #209 on: March 15, 2021, 03:42:46 PM »


“ I was at my M&D’s house helping them clear out stuff and came across a piece of Birdseye maple with what appears to be some tiger stripping along both edges.
The piece is about 3’ long 1 3/4” thick and 10 1/2” wide, wonder what I could do with it!
“

Here’s the piece, I guess Birdseye with some spalted areas the part that would look the best IMO
The two outer edges look nice!

“Build it and they will come” The field of dreams.
Started a couple boxes using the maple I mentioned earlier.
Hard to see in the pictures but its got a nice look , more figured viewed from different angles.
Looks like birdeye maple but then it changes as you move around, the one in the middle shows up most but all the wood is this way.
I’ve already got some parts but the (“they will come”) bellows / reeds,  I still need.
It would be fun ( and expensive) to build two and to wax one and gasket the other to see if there is any difference.
I also thinking of keeping it simple and not decorating the wood and just let it speak for itself? This wood is a very difficult to work with hopefully it will be worth it.

Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Building a one row four stop.......again, well two actually
« Reply #210 on: April 09, 2021, 05:19:48 PM »

another shot of my progress showing keyboard.
I’m doing it like beltuna does theirs opens from the face, this makes removing the lever/ keys a whole lot easier if needed.

I think this wood is going to look awesome!!
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Building a one row four stop
« Reply #211 on: April 12, 2021, 11:32:48 AM »

Absolutely right!!  I love the look of figured maple.  I had a maple Lilly, but the grain was bland and always felt it could have used some contrasting, darker wood to emphasise the colour, but that figure stands alone.  I particularly like the simple routed detail which breaks up the slab-sided nature of the box without being "fussy"

Rob
Logged

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Building a one row four stop
« Reply #212 on: April 12, 2021, 05:48:56 PM »

Absolutely right!!  I love the look of figured maple.  I had a maple Lilly, but the grain was bland and always felt it could have used some contrasting, darker wood to emphasise the colour, but that figure stands alone.  I particularly like the simple routed detail which breaks up the slab-sided nature of the box without being "fussy"

Rob

Thanks Rob

I was starting to think no one cares ;) I was probably right, anyway here’s the base ends I put together this weekend.
Nothing fancy, I did buy a cove bit to make the sides of the base which worked great (small passes to reduce any tear out ). Last time I made a few cuts with a regular straight bit then sanded................


I’m still debating on any more detail ( inlay ) but most likely I’ll add something. Black buttons so maybe just a black stripe. I’ll be wrapping the keyboard edge with similar, I like a bit more space than the standard top of keyboard to buttons, plus adding this gives some detail and also allows me to put a thumb groove on the back edge. I have some walnut, black walnut would be better.
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Building a one row four stop
« Reply #213 on: April 12, 2021, 08:45:13 PM »

I should add the grain on this box has some lighter and darker grain and also some dark spots, beauty marks I’ll call it. The other will have more heart wood. I’m working with what I’ve got.

Keyboard shots. I made templates (2) to route out both areas it worked great with a 1/4” top bearing bit on the first one then i went on to the next with less than what i needed for results as the bearing on this little bit busted on the second one. i’d Just buy a new bit but they are not cheap.
Plan B
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Building a one row four stop
« Reply #214 on: April 12, 2021, 11:31:21 PM »

Although you talk about the remaining wood that you're now using like B grade it will lend character to the finished article.  Such features might take decades to show through, creating such patina as in a vintage piece. 

I'm not that familiar with black walnut but I assume that like any walnut individual pieces will have differing grain and colour.  I know many like a rifle stock chosen for a fine figure and finished to bring out the red accents, whereas old school shotgun stocks would be finished to emphasise the darker brown.  Turners seem to look for the lighter browns...

For a stark contrast, ebony or lignum vitae would be striking, though to my taste a lightish brown would be a nice compliment rather than a questionable contrast and who would want to draw the eye away from that figure?

In my working life I used to visit a local stock maker and sort through his offcuts to use for small capping pieces on a variety of projects.  There was always an amazing variety of colours even though he normally only worked in either walnut or beech.  Nowadays such an artisan shop is a great rarity and even offcuts are beyond my means!  I was in an engineering firm, so if you took a few chisels and plane blades to work you had to be very careful on the homeward journey lest you lopped a finger off.

Keep up the good work.

Rob.
Logged

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Building a one row four stop
« Reply #215 on: April 13, 2021, 08:33:52 AM »


"I was starting to think no one cares"

I am following this with great pleasure. It's fascinating and inspiring.
I'm interested in your choice of timbers and your thoughts on your selections. As someone who has run a timber workshop for 30 odd years I can relate to all this.
I'm still messing about using standard Hohner bits, so seeing your mechanisms I can see how I can move on. Good photos, by the way.

It's all good stuff and I'm waiting for the next installment.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Building a one row four stop
« Reply #216 on: April 13, 2021, 08:52:15 AM »

"I was starting to think no one cares ;) I was probably right,"

No, no; you were wrong there! Like Squeaky, I'm enthralled by your story. Although I have neither the tooling nor the skill which you and Pete obviously have, I'm committed to to messing with melodeon modifications, so your ideas and pictures are food and drink to me. Thanks for them, very much!
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Graham W

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 277
Re: Building a one row four stop
« Reply #217 on: April 13, 2021, 10:04:24 AM »

That’s looking gorgeous, the contrast between Maple and Walnut will look lovely.
To my eye, boxes that let good wood speak for itself appearance wise are far nicer than ones with lots of ornamentation.

As for your router cutter, the supplied bearings aren’t always great quality - but can normally be replaced easily rather than ditch the cutter.

Graham
Logged

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Building a one row four stop
« Reply #218 on: April 13, 2021, 03:34:36 PM »

Although you talk about the remaining wood that you're now using like B grade it will lend character to the finished article. 

Keep up the good work.

Rob.
I’d call it A grade wood with character.
If I had enough material I would just cut around the defect ( if you want to call it that ) , I’m doing my best to blend it or strategically locating it.
I like it its a tree with a story to tell.


"I was starting to think no one cares"

I am following this with great pleasure. It's fascinating and inspiring.
I'm interested in your choice of timbers and your thoughts on your selections. As someone who has run a timber workshop for 30 odd years I can relate to all this.
I'm still messing about using standard Hohner bits, so seeing your mechanisms I can see how I can move on. Good photos, by the way.

It's all good stuff and I'm waiting for the next installment.
Thanks Pete,
My choice of timber is what I have on hand, I’m trying not to buy any. This piece as I said came from my Dad’s collection of three feet or shorter material (mostly useless) I was tossing out of the garage, I still need to clean out all the 8” long slivers of wood he’s got stuffed into the joist bays in the basement. The other material I have cherry ,walnut , hickory, ash, tulip poplar, mahogany, oh did I mention pine, I got from my father in law he loved to go to the mill and buy a piece or a lot. When he passed I took most of it, my hope is I use it before I lose it  ;D  this way my kids won’t have to clear it out.

"I was starting to think no one cares ;) I was probably right,"

No, no; you were wrong there! Like Squeaky, I'm enthralled by your story. Although I have neither the tooling nor the skill which you and Pete obviously have, I'm committed to to messing with melodeon modifications, so your ideas and pictures are food and drink to me. Thanks for them, very much!
Thanks Winston
Pretty sure Pete’s got a better shop than my shed with a couple of basic tools ( which becomes a real pain with setup time)
That’s looking gorgeous, the contrast between Maple and Walnut will look lovely.
To my eye, boxes that let good wood speak for itself appearance wise are far nicer than ones with lots of ornamentation.

As for your router cutter, the supplied bearings aren’t always great quality - but can normally be replaced easily rather than ditch the cutter.

Graham

thanks Graham , I think so too.
Unfortunately I don’t think I can replace the bearing on this one , it’s Amana tool 1/4” D bit top bearing template type made for luthier stuff I believe. I bought two one with a 1/4” cutter length and the other with 1/2” CL. The 1/4” I busted and figured the 1/2” CL would not do any better and probably worse. At $32 each.
So this finger board cost that , I can still use the bit for 6mm inlay or other uses.

Picture of walnut wrapping ( this piece is not long or wide enough to use ). I’ll have to see if I can get enough out of the pieces I have, I got plenty of length but its not all heartwood.
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

Graham W

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 277
Re: Building a one row four stop
« Reply #219 on: April 13, 2021, 04:06:17 PM »

Ah, I'm not familar with Amana cutters - not seen them over here.
Don't discount the Walnut sapwood - it looks lovely in its own right and is just as stable. Too expensive not to use!

I've got laser cutter envy  ;)
Logged
Pages: 1 ... 6 7 8 9 10 [11] 12 13   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal