Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 ... 7 8 9 10 11 [12] 13   Go Down

Author Topic: Building a one row four stop  (Read 47420 times)

0 Members and 2 Guests are viewing this topic.

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Building a one row four stop
« Reply #220 on: April 13, 2021, 04:38:32 PM »

Ah, I'm not familar with Amana cutters - not seen them over here.
Don't discount the Walnut sapwood - it looks lovely in its own right and is just as stable. Too expensive not to use!

I've got laser cutter envy  ;)
I might try a piece of sapwood also, as I already have a cut off from a different project.

I've got laser envy too!

The first one I built I had help from a member here ( thanks Howard) who had access to one.
He did a great job with it. I ended up with one faceplate, two sub plates and sets of slides and spacers leftover.
I have enough to do two more boxes if I get one more faceplate made up, and at that point why not do extra  ;)
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Building a one row four stop
« Reply #221 on: April 13, 2021, 04:56:30 PM »

If you wish to darken the walnut as a contrast to the pale maple you could try ebonising it with iron acetate.   It might not work so well on sapwood, but it works a treat on heartwood which ends up almost black but still retains the grain and texture.  And its penetrates into the wood, so you don't get obvious light colour appearing on edges that wear.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Building a one row four stop
« Reply #222 on: April 13, 2021, 11:59:03 PM »

If you wish to darken the walnut as a contrast to the pale maple you could try ebonising it with iron acetate.   It might not work so well on sapwood, but it works a treat on heartwood which ends up almost black but still retains the grain and texture.  And its penetrates into the wood, so you don't get obvious light colour appearing on edges that wear.
Thanks for the tip Theo, I might try it if needed, I’ve not worked with it.
I’ll probably consider adding a stain or color to the plates for a little pop? I think the birch ply with the Maple together (as is) will be bland. I will look around to see combos on other boxes I might like and this will call out the color of the trim I’ll use or vice versus.
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Building a one row four stop
« Reply #223 on: April 14, 2021, 09:02:51 AM »

Have a look at the Gallery on my website for some ideas.

http://www.melodeons.com/gallery

As you will see, some of mine have plain un-dyed plywood end plates and I agree, they can look a bit bland.
« Last Edit: April 14, 2021, 11:33:06 AM by Rees »
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Building a one row four stop
« Reply #224 on: April 14, 2021, 12:17:29 PM »

Have a look at the Gallery on my website for some ideas.

http://www.melodeons.com/gallery

As you will see, some of mine have plain un-dyed plywood end plates and I agree, they can look a bit bland.

Thanks Rees, I could look at those all day long!
# 13 has an interesting keyboard extension, was this a custom job?
Also what do you use for your plate dyes?
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Building a one row four stop
« Reply #225 on: April 14, 2021, 12:43:22 PM »

Yes, No.13 was a custom job with extended keyboard. Also No.15 is custom made with four stops in the left hand which has extra low notes instead of chords and basses.
For the colours I use Chestnut Spirit Dye and the natural wood stains are by Colron.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Building a one row four stop
« Reply #226 on: April 16, 2021, 01:57:14 PM »

Yes, No.13 was a custom job with extended keyboard. Also No.15 is custom made with four stops in the left hand which has extra low notes instead of chords and basses.
For the colours I use Chestnut Spirit Dye and the natural wood stains are by Colron.
Thank you , I’ll look into the stain.
I tried some wood stains I have on hand, I’m not happy with it yet.
Definitely a more lively color than what I’ve got at the moment or black possibly.
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Building a one row four stop
« Reply #227 on: April 16, 2021, 02:03:18 PM »

Tim Phillips (violin maker) often uses Dylon fabric dye to stain his fiddles.
Yellow, blue, purple, green, etc.
Whatever works best!  ;D

Black would look good with your maple.
« Last Edit: April 16, 2021, 02:05:59 PM by Rees »
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

komat

  • Eastcoaster
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 228
Re: Building a one row four stop
« Reply #228 on: April 21, 2021, 04:03:07 PM »

I just finished this one, and I’m thinking I should have darkened the end plates a little. I will on the next one I think.
Logged
Too many accordions, help!

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Building a one row four stop
« Reply #229 on: April 21, 2021, 05:12:05 PM »

Nice looks good! Interesting that you went with the button lever behind the keyboard with just a hole for the arm.
Did you make the pallets? Darker plate might look better? Or maybe if the pallets were darker for contrast?

On my box the (plan) was /is that I’d be using maple for the pallets and that they would look better on a darker background, since I’m doing two of them I guess I could try different colors. The process is all organic to me, I don’t really plan it out exactly.
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

komat

  • Eastcoaster
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 228
Re: Building a one row four stop
« Reply #230 on: April 21, 2021, 05:40:50 PM »

I did make the pallets, sort of a Pariselle type thing. I liked the idea of a “hidden” action, something I’ve seen on a few models made in Quebec.. I guess the bellows and buttons do contrast the maple and birch in the box, and something I’ve discussed with another member on here often was different colour plates vs. the box being uniform on all wooden aspects. Perhaps I can darken the pallets and stops (which need to be shortened). Lots of ways to skin a cat!
« Last Edit: April 21, 2021, 05:42:27 PM by RBak »
Logged
Too many accordions, help!

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Building a one row four stop
« Reply #231 on: April 21, 2021, 06:14:49 PM »

I did make the pallets, sort of a Pariselle type thing. I liked the idea of a “hidden” action, something I’ve seen on a few models made in Quebec.. I guess the bellows and buttons do contrast the maple and birch in the box, and something I’ve discussed with another member on here often was different colour plates vs. the box being uniform on all wooden aspects. Perhaps I can darken the pallets and stops (which need to be shortened). Lots of ways to skin a cat!
For sure!  In the end its more about how it plays and sounds and that can only be improved upon by a good player.

What did you use for reeds? And any inside pics you would like to share? Sound sample?
I ask for others as well as myself  :D
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

-Y-

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 896
  • Handry 18 (G/C), Mélodie (D), Club IIb (A/D)
    • a database of nearly 500 melodeons here
Re: Building a one row four stop
« Reply #232 on: April 21, 2021, 06:44:30 PM »

Nicely done RBak !
Your stop design reminds me of the Clément Breton melodeons.
Sound sample would be great indeed  ;D

komat

  • Eastcoaster
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 228
Re: Building a one row four stop
« Reply #233 on: April 22, 2021, 01:43:45 AM »

Nicely done RBak !
Your stop design reminds me of the Clément Breton melodeons.
Sound sample would be great indeed  ;D

That’s what I had in mind, love Clement’s work!

I used Binci a mano on brass plates. I like the added weight to keep the box still on the knee, and with only 6 plates in the left hand I still find it easy enough to handle. The brass plates really give them an extra kick.

Video here:  https://youtu.be/vF_tVaKe2mI

I’ve added a few interior photos as well.
« Last Edit: April 22, 2021, 02:08:59 AM by RBak »
Logged
Too many accordions, help!

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Building a one row four stop
« Reply #234 on: April 22, 2021, 07:22:36 PM »


Sounds great!! Good job (:)
Thanks for posting the video and pictures.

If I could make a suggestion without being or sounding critical or maybe you intend to add these later?
You might want to add corner brace blocks to the frames, even though you joints look fine and may very well hold on there own. The blocks are easy to make and add extra a strength and it looks like you could add them easy enough.
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

komat

  • Eastcoaster
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 228
Re: Building a one row four stop
« Reply #235 on: April 23, 2021, 12:43:54 AM »


Sounds great!! Good job (:)
Thanks for posting the video and pictures.

If I could make a suggestion without being or sounding critical or maybe you intend to add these later?
You might want to add corner brace blocks to the frames, even though you joints look fine and may very well hold on there own. The blocks are easy to make and add extra a strength and it looks like you could add them easy enough.

No harm at all, always open to suggestions. I actually have those cut and had meant to glue them in when I had everything else assembled, but the excitement of playing it took precedence and so those blocks are still on my desk  :||:
Logged
Too many accordions, help!

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Building a one row four stop
« Reply #236 on: April 24, 2021, 12:57:33 AM »


Sounds great!! Good job (:)
Thanks for posting the video and pictures.

If I could make a suggestion without being or sounding critical or maybe you intend to add these later?
You might want to add corner brace blocks to the frames, even though you joints look fine and may very well hold on there own. The blocks are easy to make and add extra a strength and it looks like you could add them easy enough.

No harm at all, always open to suggestions. I actually have those cut and had meant to glue them in when I had everything else assembled, but the excitement of playing it took precedence and so those blocks are still on my desk  :||:
I can see how that could happen, I was playing mine soon after getting the reeds for the MM banks waxed in :||:
So you made your stop knobs, what did you use for the connecting rod / shanks (the cajun term I believe) Buy or make your own?
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

komat

  • Eastcoaster
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 228
Re: Building a one row four stop
« Reply #237 on: April 24, 2021, 04:06:53 AM »

I got some 3mm brass rod from a metal working friend. I threaded the ends myself and tapped the corresponding holes and blocks attached to the slides/registers.

How about you? I know a lot of people are getting them from Martin Accordions I believe (they’re the ones who sell parts, right?).
Logged
Too many accordions, help!

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Building a one row four stop
« Reply #238 on: April 24, 2021, 01:05:09 PM »

I got some 3mm brass rod from a metal working friend. I threaded the ends myself and tapped the corresponding holes and blocks attached to the slides/registers.

How about you? I know a lot of people are getting them from Martin Accordions I believe (they’re the ones who sell parts, right?).
Cool, I thought they looked home made because they are brass.
I got my stuff or partly from Mouton accordions, they didn’t have all i needed so I got the rest from John Doucet. This time I’ll probably go though John, nice man and he was willing to share some tips, even though we both where having a hard time hearing/ understanding one another. His pricing was good too.
I tried Martin they never got back to me. The daughter of junior (penny I believe) is the one who sells parts and I could not get her info.
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

komat

  • Eastcoaster
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 228
Re: Building a one row four stop
« Reply #239 on: April 24, 2021, 05:17:28 PM »

Good to hear different builders are willing to share info and parts like that. Makes a lot of the process easier.
Logged
Too many accordions, help!
Pages: 1 ... 7 8 9 10 11 [12] 13   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal