Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Button travel adjustment for Hohner Double Ray  (Read 1408 times)

0 Members and 1 Guest are viewing this topic.

Matt Knight

  • Member
  • *
  • Offline Offline
  • Posts: 7
Button travel adjustment for Hohner Double Ray
« on: March 26, 2019, 11:25:12 PM »

Hello!

Wondering if you fine folks might be able to point me in the right direction. I picked up a German Double-Ray recently and would like to pad the treble keyboard to limit the button movement, as they go too far down the holes when pressed. I wouldn't consider myself mechanically inclined by any stretch, but it seems like a fairly simple operation to somehow remove the plastic keyboard, glue maybe a felt-lined strip of wood in there, and slap it back on. I'm not even sure how to start detaching it with the least amount of risk. Betting there's a little more to it than that, and hoping for some guidance.
Logged

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Button travel adjustment for Hohner Double Ray
« Reply #2 on: March 27, 2019, 07:48:21 AM »

Fairly sure one of these would fit, video of me fitting one due soon.


https://www.acorninstruments.co.uk/inst.cfm?instID=24

pete /acorn

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 930
  • .Cast Trilly
    • Acorn Instruments
Re: Button travel adjustment for Hohner Double Ray
« Reply #3 on: March 27, 2019, 01:22:22 PM »

Hi
Yes they do fit the Double Ray
Logged
Acorn Instruments are specialist retailers of Castagnari Instruments,and have an extensive stock of new instruments on the shelf for prompt delivery in standard layouts however these can easily be changed to customers special requirements,we have over 600 reeds in stock
 We also have the largest stock in the UK of  pre loved melodons all fully serviced,and with 12 months warranty
UK and international customers catered for
www.acorninstruments.co.uk

Matt Knight

  • Member
  • *
  • Offline Offline
  • Posts: 7
Re: Button travel adjustment for Hohner Double Ray
« Reply #4 on: March 27, 2019, 03:34:21 PM »

Thanks for all the quick replies! Had a good feeling about this place :)
Logged

Pat McInnis

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 390
Re: Button travel adjustment for Hohner Double Ray
« Reply #5 on: March 27, 2019, 08:25:05 PM »

I have a foam anti-fatigue mat that I have in my garage that I have been using. It's about 1/4" thick and cut to fit inside the button board. It takes a bit of encouragement to get the button board back into place but it's been working good so far. I didn't even glue the last one. Just friction fit.
Logged

Matt Knight

  • Member
  • *
  • Offline Offline
  • Posts: 7
Re: Button travel adjustment for Hohner Double Ray
« Reply #6 on: March 29, 2019, 05:56:47 AM »

I have a foam anti-fatigue mat that I have in my garage that I have been using. It's about 1/4" thick and cut to fit inside the button board. It takes a bit of encouragement to get the button board back into place but it's been working good so far. I didn't even glue the last one. Just friction fit.
Cheers Pat, that sounds like an excellent solution. Between that and checking out Lester's video(s) I cannot wait to get my box back from the tuner next week and start in on the keyboard. Thank you for your suggestion!
Logged

folkloristmark

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 582
    • street entertainers
Re: Button travel adjustment for Hohner Double Ray
« Reply #7 on: March 29, 2019, 12:07:54 PM »

The foam is a good soft option .But becareful as you put the keyboard back on its a little harder ,make sure it does not ruck up.Also on older instruments if there is a curve in the board or keys it can be hard this way to get an even response.If you start layering it gets trickier. A wood bead behind the grill or under the mech, you can see both option on this site. can be softened with a overlay.The finger board on older instruments sometimes can crack with removal . The acorn keyboard makes all the fitting a lot easier.You can mod a cracked keyboard in such away yourself with some wood working skills.I try and soft fit most of my Hohners but I dont really know if it does that much difference as you get used to playing them.Imho, It is a balance between button travel and pallet lift correctly adjusted buttons and pallets should not give a problem.All the options above should be reversable.
Logged
Mark Taylor
Folkloristmark
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal