Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Straightening a bent brass axle  (Read 1271 times)

0 Members and 1 Guest are viewing this topic.

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Straightening a bent brass axle
« on: March 27, 2019, 05:06:53 PM »

I used a variation on the method shown in this video to straighten a bent 2.5mm brass axle. In fact I used a pillar drill, and because the axle is 350mm long I ended up with two bits of wood with 4mm holes (just off cuts, but at least 400mm long). The axle does whip around unless you keep a hold of it with the drilled wood until it has stopped rotating, so I used one piece of wood to hold the free end and the other to straighten kinks further up the axle. Kinks near the free end can be straightened with just one bit if wood. The timber I used was quite soft...probably get better result with a harder wood.  I have no idea if this works with a steel axle, but it worked pretty well with brass. I’ve got a friend who repairs brass instruments and he alerted me to this idea.
https://youtu.be/RvPTAIAF5EQ

John MacKenzie (Cugiok)

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2360
  • Fettling... Learning to reed and right.
Re: Straightening a bent brass axle
« Reply #1 on: March 27, 2019, 05:51:54 PM »

Well who'd have known that that would work. Thanks a lot, very useful.

SJ
Logged
There is no beginning to my talent :)



: Hohner Club Modell 1. Bb/Eb, de-clubbed : Early Hohner Pressed Wood A/D : 1930's Varnished wood G/C:  Hohner Erika C/F: Bandoneon tuned D/G Pressed wood: Koch F/Bb; G/C Pre Corso

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Straightening a bent brass axle
« Reply #2 on: March 27, 2019, 06:04:32 PM »

I have no idea if this works with a steel axle ...
The video shows the method used to straighten a saxophone axle rod. These rods are made of steel, so it should work for a steel melodeon axle rod.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

george garside

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5401
Re: Straightening a bent brass axle
« Reply #3 on: March 27, 2019, 08:05:06 PM »

brass and steel rod is readily available from model shops and ? on t'internet in metre lengths and various diameters

george
Logged
author of DG tutor book "DG Melodeon a Crash Course for Beginners".

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Straightening a bent brass axle
« Reply #4 on: March 27, 2019, 08:16:54 PM »

Thanks for that Roger.  Looks like a pretty quick process, I’ll remember this n dg time I have a bent axle rod to repair.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Straightening a bent brass axle
« Reply #5 on: March 27, 2019, 08:17:50 PM »

It's how I straighten out long drills for bagpipe making. 3mm dia and 250mm long is always a bit vulnerable.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Man1nvan

  • Member
  • *
  • Offline Offline
  • Posts: 21
Re: Straightening a bent brass axle
« Reply #6 on: March 27, 2019, 11:11:49 PM »

Genius!
Logged
de-clubbed Hohner Modell 1 C/F,  Student D/G, Victoria Club modell

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Straightening a bent brass axle
« Reply #7 on: March 30, 2019, 06:47:59 AM »

I was unaware of this particular fetish. I am always up for some tool porn.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal