Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Condition of reeds  (Read 2373 times)

0 Members and 1 Guest are viewing this topic.

Mark Leue

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 175
Condition of reeds
« on: April 05, 2019, 11:11:00 PM »

Here's a reed block from a presswood Hohner CF I'm learning to work on.
As you can see it has mixed age reeds, with a couple of zinc blocks.
Questions: What are the chances that Hohner did this originally, or is it a repair?
Is the oxidation and some rust pitting on the reeds bad enough to worry about?
Anything else about them other than the missing valves that you notice?  thanks.
Logged

Eshed

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 447
Re: Condition of reeds
« Reply #1 on: April 05, 2019, 11:23:18 PM »

I have a Club IIB Victoria with mixed age reeds as well, no idea what this says, though :D
Logged
Do you have a Hohner from 1934-1945 with a serial number on?
Send me a private message or comment on the German Accordion Problem spreadsheet to improve the statistics of the project and get an estimate of the production date of the box if it is not known.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Condition of reeds
« Reply #2 on: April 06, 2019, 12:07:59 AM »

That looks like the original Hohner setup to me. I’ve seen many examples of mixed aluminium and zinc reeds on the same block and with every indication that they are original.

I don’t see any missing valves.  The highest two or three reeds on each block don’t usually have valves - they work better that way.  If in doubt look for traces of old glue which you will be able to see if there were valves which have got lost.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Mark Leue

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 175
Re: Condition of reeds
« Reply #3 on: April 06, 2019, 02:08:01 PM »

Thanks, interesting.

How about that corrosion? Not a big deal?
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Condition of reeds
« Reply #4 on: April 06, 2019, 02:24:29 PM »

Not enough corrosion to affect reed performance,  but worth cleaning off when you take the reeds off the blocks.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: Condition of reeds
« Reply #5 on: April 06, 2019, 02:34:16 PM »

Quote
That looks like the original Hohner setup to me. I’ve seen many examples of mixed aluminium and zinc reeds on the same block and with every indication that they are original.

Question for Theo...

Do you have any idea of the approximate ages of the boxes with mixed reed plates?

In the early post war years - certainly up to the mid fifties British manufacturing faced serious difficulties with regular  material supply. It would be no surprise to find that the other European economies were in the same boat.
It may well have been the case that in that period the punching machines used to mass produce the reed plates could have been running off some batches in Aluminium and others in zinc.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Condition of reeds
« Reply #6 on: April 06, 2019, 02:41:31 PM »

Could be.  It could also be that there were varied stock levels of different size reed plates.  The new aluminium plates just came in as individual sizes of zinc plates were exhausted.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: Condition of reeds
« Reply #7 on: April 06, 2019, 09:56:22 PM »

Does anyone have any idea when Hohner switched from Zinc to Aluminium? 
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Condition of reeds
« Reply #8 on: April 06, 2019, 10:28:58 PM »

My best guess it was over the 30s/40s/50s, I don’t think it happened over a short period. It’s not unusual to find mixes like yours, and more common to find zinc treble reeds with aluminium bass reeds.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Mark Leue

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 175
Re: Condition of reeds
« Reply #9 on: April 07, 2019, 03:02:57 AM »

Not enough corrosion to affect reed performance,  but worth cleaning off when you take the reeds off the blocks.

Suggestions for an effective method when both sides of the reed are available? 0000- steel wool? 

Thanks.
Logged

Jesse Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 761
  • Buffalo, NY, USA
Re: Condition of reeds
« Reply #10 on: April 07, 2019, 03:21:07 AM »

I don't know if there's any connection but low-denomination German coins were made of zinc from 1940 until the end of the war (presumably bronze was needed for war materials or was just too expensive for a wartime economy). I wonder if that could have disrupted supplies or prices and encouraged the change.

I believe my 1950s presswood has a mixture of reed plates, too. I think I read that one way to date the boxes is by the domed "feet" on the bass side. If they are separate from the screws that hold on the panel, it is a post-war box. If the feet are held on by those same screws, it is earlier. But someone please correct me if I've got that wrong.
« Last Edit: April 07, 2019, 02:31:40 PM by Jesse Smith »
Logged
Hohner Pokerwork D/G (x2!), Hohner one row four stops in D and C, Hohner Presswood C/F.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Condition of reeds
« Reply #11 on: April 07, 2019, 07:26:05 AM »

Not enough corrosion to affect reed performance,  but worth cleaning off when you take the reeds off the blocks.

Suggestions for an effective method when both sides of the reed are available? 0000- steel wool? 

Thanks.

Not steel wool it’s horrible stuff, and fibres can easily get stuck in the reed gap.

I use an abrasive polishing block like this https://www.cooksongold.com/Jewellery-Tools/-Range=Polishing_Materials/-Size=0/-Type=Abrasive_Blocks/-Brand=0/-Font=0/&prdsearch=y
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal