Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Hohner service workshops  (Read 998 times)

0 Members and 1 Guest are viewing this topic.

Mark Leue

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 175
Hohner service workshops
« on: April 12, 2019, 02:11:00 PM »

I did a search here on Melnet, and the subject didn't come up, so hopefully I'm not being totally redundant.

I had a look at several of these, even though they're oriented towards harmonicas I thought there was some pretty good information to be gleaned in them. The software looks nicely organized, although nothing novel there.

Now if I could only work out how to add a link in Melnets software...

The URL button (attach hyperlink)  only takes me to files on my computer, whereas I just went to paste in a web address. anyway they're searchable on you tube under this address among others. https://www.youtube.com/watch?v=12cdfpp2Sg0

Hey, wait, I just answered my own question...
The tuning, cleaning an  other episodes have some interesting bits.
« Last Edit: April 12, 2019, 02:18:15 PM by Mark Leue »
Logged

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Hohner service workshops
« Reply #1 on: April 13, 2019, 06:47:13 AM »

I’ve watched some of these before. The one about reed offset is pretty good. The rule of thumb about the gap (it’s the same as the thickness of the tip of the reed) is the same rule of thumb as given in the Benetoux book. NB...not including the weight, if there is one. It’s a rule of thumb though, but a good place to start (and test the response on your tuning table).

Mark Leue

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 175
Re: Hohner service workshops
« Reply #2 on: April 13, 2019, 10:49:13 AM »

« Last Edit: April 13, 2019, 11:02:46 AM by Mark Leue »
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal