Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2 3   Go Down

Author Topic: Contact adhesive for vinyl valves  (Read 7199 times)

0 Members and 1 Guest are viewing this topic.

Mark Leue

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 175
Contact adhesive for vinyl valves
« on: April 29, 2019, 11:21:33 PM »

Can anyone recommend a contact adhesive that will not melt vinyl valves commonly available in the US?  Charlie Marshall's note to use "Bostik or B$Q"
is not helpful as neither is available here. Thanks.
Logged

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Contact adhesive for vinyl valves
« Reply #1 on: April 29, 2019, 11:32:56 PM »

I'm not sure if if "Bostik" is a definitive definition  ;D, since they have an enormous range of products, but they are a world class manufacturer and distribute world wide, including the US. Should be easy to buy on line, if your local hardware store doesn't stock. Most major adhesive manufacturers make similar products.

https://www.bostik.com/us/
« Last Edit: April 29, 2019, 11:35:22 PM by Tone Dumb Greg »
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: Contact adhesive for vinyl valves
« Reply #2 on: April 29, 2019, 11:41:14 PM »

Copydex might well work- I have not tried it on plastic valves though.
It is a latex based product- may be sold under a different trade name in the US.
Logged

Mark Leue

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 175
Re: Contact adhesive for vinyl valves
« Reply #3 on: April 30, 2019, 12:02:46 AM »

Actually no. Bostik contact adhesive is only available as an import from Canada and Australia as near as I can tell.
Latex base contact adhesive usually is not great.
Logged

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Contact adhesive for vinyl valves
« Reply #4 on: April 30, 2019, 12:20:50 AM »

Actually no. Bostik contact adhesive is only available as an import from Canada and Australia as near as I can tell.
Latex base contact adhesive usually is not great.

Edit: Looking closer, you may be right. You need to know which Bostik product is recommended then find another manufacturer supplying the same stuff. What Lester is recommending isn't a latex adhesive. It's a commonly available (here) tube of what laymen call "glue". Have you tried any of the common US stuff, such as Multibond? I think it's similar.

https://www.ebay.com/itm/Multibond-Contact-Adhesive-Glue-30-ml-Shoe-Rubber-Wood-Plastic-Leather-Repair/133009406324?epid=875065790&hash=item1ef7fa7974:g:thcAAOSwd5xcoff6



Try ebay. The only problem you should get is you need to know which specific product is recommended. Ideally use a vinyl adhesive  :D Like I say, these are made by many major manufacturers. Safety Data Sheets are the most informative source of information.
« Last Edit: April 30, 2019, 12:40:38 AM by Tone Dumb Greg »
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Mark Leue

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 175
Re: Contact adhesive for vinyl valves
« Reply #5 on: April 30, 2019, 02:18:41 AM »

that's all good in theory, Greg, I was just hoping someone here in the US has already found a non latex but non dissolving major brand already.
Logged

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Contact adhesive for vinyl valves
« Reply #6 on: April 30, 2019, 02:45:36 AM »

This one works well for both vinyl and leather:

https://www.gorillatough.com/product/gorilla-super-glue/
Logged

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Contact adhesive for vinyl valves
« Reply #7 on: April 30, 2019, 06:08:16 AM »

Can you get UHU or Pattex? I use both successfully with vinyl valves.
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Contact adhesive for vinyl valves
« Reply #8 on: April 30, 2019, 06:42:30 AM »

Copydex might well work- I have not tried it on plastic valves though.
It is a latex based product- may be sold under a different trade name in the US.


Don’t use Copydex !! In a very short time it becomes a very sticky mess, much like Sellotape.😫
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

invadm

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 613
Re: Contact adhesive for vinyl valves
« Reply #9 on: April 30, 2019, 09:04:56 AM »

Logged

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Contact adhesive for vinyl valves
« Reply #10 on: April 30, 2019, 09:35:38 AM »

Charlie sells glue for valves too,    http://www.cgmmusical.co.uk/CGM_Musical_Services/Hohner_Parts.html#89

Might work out a tad expensive by the time you get it to the US, though.

Charlie sells glue for valves too,    http://www.cgmmusical.co.uk/CGM_Musical_Services/Hohner_Parts.html#89

Might work out a tad expensive by the time you get it to the US, though

[Edit: There's a TDS for what I think is Lester's meaning of Bostik here. Commonly available contact adhesive. I note that it doesn't recommend it for use with soft Vinyl. Doesn't mean it doesn't work in this application, though

https://www.bostik.com/UK/technical-support/bostik-technical-data-sheets/]
« Last Edit: April 30, 2019, 09:51:53 AM by Tone Dumb Greg »
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Mark Leue

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 175
Re: Contact adhesive for vinyl valves
« Reply #11 on: April 30, 2019, 01:00:50 PM »

Yes, I saw Charlie's "genuine Hohner glue"
I'd rather not use something from far away when I'm certain the correct glue is available here in the land of hundreds of choices in adhesives...

I'm all for using the best materials possible where it's important of course, but I'm pretty sure there are adhesives here that will work very well.

Asking here is bit lazy of me, I'll go and bug my local box fetterer when I get a chance.  Good excuse to see him.
« Last Edit: April 30, 2019, 01:03:04 PM by Mark Leue »
Logged

invadm

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 613
Re: Contact adhesive for vinyl valves
« Reply #12 on: April 30, 2019, 02:36:27 PM »

I've used the red bostic for a few years and I had bunch of them as stock than run out of the stock,ordered some more but for some reason bostik's changed from red tube to purple ,new peple lot is different to the old red ones .I don't know the chemical content of the stuff but NEW purple colour bostik don't work well on the smaller vinyl valves any more,it distorts the shape,damages and melts almost..this is on the 2 layer small valves. bigger bass valves and 3-4 layers vinyl valve aren't so bad...old red bostik didn't do any of this..
I was going to ask here on mel net regarding this but found some old stock on ebay.UK. I am not sure what Pro fettler are using
if you find a suitable contact glue I suggest try on the smaller valve first and see how it goes, no doubt you'd do this anyways. 50ml bostik tube is available here in the UK for 4-5 £             
Logged

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Contact adhesive for vinyl valves
« Reply #13 on: April 30, 2019, 05:32:47 PM »

Something like this maybe? 3m sells a couple of different ones.
This is clear and comes in a tube, sticks well to metal and plastic, has enough open time.
I haven’t use it, but its what they claim, you’d have to see on the vinyl. Should be fine I’d think.
No connection with seller, just a site that look like they have what you need.

I think??, I heard mentioned here that varnish or shellac could be used. Maybe that was for leather?

https://www.hillas.com/Categories/Plastic-Adhesives/3M-Scotch-Weld-High-Performance-Industrial-Plastic-Adhesive-4693H-Clear-5-oz-36-per-case.html?gclid=CjwKCAjwwZrmBRA7EiwA4iMzBB5d3YOjAhIAvXPsZ8h_eU3Qw9rHfK6qsLqOFrixiLow97P4RbHvYhoCB3sQAvD_BwE
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Contact adhesive for vinyl valves
« Reply #14 on: April 30, 2019, 05:40:22 PM »

I've used the red bostic for a few years and I had bunch of them as stock than run out of the stock,ordered some more but for some reason bostik's changed from red tube to purple ,new peple lot is different to the old red ones .I don't know the chemical content of the stuff but NEW purple colour bostik don't work well on the smaller vinyl valves any more,it distorts the shape,damages and melts almost..this is on the 2 layer small valves. bigger bass valves and 3-4 layers vinyl valve aren't so bad...old red bostik didn't do any of this..
I was going to ask here on mel net regarding this but found some old stock on ebay.UK. I am not sure what Pro fettler are using
if you find a suitable contact glue I suggest try on the smaller valve first and see how it goes, no doubt you'd do this anyways. 50ml bostik tube is available here in the UK for 4-5 £             

I've been using the red tube Bostik 'Glu & Fix' contact adhesive for a few years and never had any problem with softening/dissolving the vinyl valves. My last tube of red adhesive is nearing the end, so I don't know what I'll try next. Maybe I'll give the purple stuff a go, but if it starts to attack the vinyl, I'll have to think again and probably get the 'proper' valve adhesive from Charlie Marshall.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Contact adhesive for vinyl valves
« Reply #16 on: April 30, 2019, 05:51:40 PM »

I've been using the red tube Bostik 'Glu & Fix' contact adhesive for a few years and never had any problem with softening/dissolving the vinyl valves. My last tube of red adhesive is nearing the end, so I don't know what I'll try next. Maybe I'll give the purple stuff a go, but if it starts to attack the vinyl, I'll have to think again and probably get the 'proper' valve adhesive from Charlie Marshall.

Get it here, if you're quick

https://www.ebay.co.uk/itm/Bostik-Contact-Adhesive-Tube-50Ml-Household-Repairs-DIY-Tools-Home-Garage-New/332126614649?epid=1330584098&hash=item4d5449f479:g:YvcAAOSwDk5UCXRW
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Contact adhesive for vinyl valves
« Reply #18 on: April 30, 2019, 06:55:44 PM »

This is what I use at the moment:

https://www.amazon.ca/LePage-Latex-Contact-Cement-1505670/dp/B019GISXH8/ref=asc_df_B019GISXH8/?tag=googlemobshop-20&linkCode=df0&hvadid=292985312145&hvpos=1o7&hvnetw=g&hvrand=8643326404474930417&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9000507&hvtargid=pla-627504643432&psc=1

Hmm... If it's latex based, I'm not sure I would trust a metal-to-vinyl bond to hold for any significant time. In my experience latex adhesives (e.g. 'Copydex') tend to go all gooey and fail after a while. But maybe your experience with this product is OK. 
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com
Pages: [1] 2 3   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal