Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 2 [3]   Go Down

Author Topic: Contact adhesive for vinyl valves  (Read 7217 times)

0 Members and 1 Guest are viewing this topic.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Contact adhesive for vinyl valves
« Reply #40 on: May 09, 2019, 02:35:03 PM »

I think there can be differences between types of plastic valve.  I’ve had some types that distort, and others that don’t.

If you are worried ust do a few test valves when using a new batch of valves.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Contact adhesive for vinyl valves
« Reply #41 on: May 09, 2019, 02:41:49 PM »

Good tip, Theo, thanks!
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

invadm

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 613
Re: Contact adhesive for vinyl valves
« Reply #42 on: May 09, 2019, 03:46:50 PM »

I think there can be differences between types of plastic valve.  I’ve had some types that distort, and others that don’t.

If you are worried ust do a few test valves when using a new batch of valves.

second.I use hole punch valves different batches different results ever time I get new lot..good to know purple works on some valves,never had issue with bonding.     
Logged

Barry Tolson

  • Good talker
  • **
  • Offline Offline
  • Posts: 65
Re: Contact adhesive for vinyl valves
« Reply #43 on: July 22, 2019, 01:18:11 AM »

I've recently used hide glue on both leather and vinyl valves and it seems to work fine. Does anyone have experience with hide glue in this application?
Logged
Hohner Club IIB Victoria

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Contact adhesive for vinyl valves
« Reply #44 on: July 22, 2019, 06:56:49 AM »

Hide glue was used in the past for attaching valves.  I often see it on 1930s and earlier instruments where it seems to have lasted well. I would have doubts about it’s long term use with plastic valves,  but you have now set up a test, so please monitor your work and give us some feedback!
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Barry Tolson

  • Good talker
  • **
  • Offline Offline
  • Posts: 65
Re: Contact adhesive for vinyl valves
« Reply #45 on: July 26, 2019, 09:39:17 PM »

You inspired me, Theo, to set up some short term tests. Plastic valves were glued onto a steel reed plate with several different adhesives, then pulled off 24 hours later to determine the holding strength at that point. Hide glue, shellac, Elmer's School Glue(pva?), Elmer's No Wrinkle Rubber Cement, all felt the same at 24 hours and all seems to have adequate adhesion. Aileen's Tacky Glue felt more strongly bonded than the others. Yet to try is contact cement, but that will have to wait until I obtain some.   Interestingly, none of the adhesives that I tried seemed substandard. I would feel comfortable using any of them.(my opinion could change, though!)  Next...to set up some surplus reeds for long term tests.   
Logged
Hohner Club IIB Victoria

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Contact adhesive for vinyl valves
« Reply #46 on: July 26, 2019, 09:57:04 PM »

Next...to set up some surplus reeds for long term tests.   

You need to use a range of adhesives on a frequently played instrument and see which ones survive best. This could take some time.
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Contact adhesive for vinyl valves
« Reply #47 on: July 26, 2019, 10:27:39 PM »

Yes it’s the long term performance that matters.  In the 70s Hohner were very innovative in many ways and used a new adhesive for valves.  I’ve no idea what it was,  but I’m still wary of instruments where it was used where the valves tend to drop off and the root of the reeds suffer an unusually large degree of corrosion. Fortunately for us it seems to be mainly piano boxes that are affected.

Then more recently a range of self adhesive valves were sold quite widely,  unfortunately they started to be shed after only a few years.  I saw a very sad case where an owner had paid many £100s for a reed overhaul on a large 4 voice PA, only to be faced with doing it all again.  I was asked to look at that one because the couplers weren’t working because they were jammed up with valves.

 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

invadm

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 613
Re: Contact adhesive for vinyl valves
« Reply #48 on: July 26, 2019, 11:27:59 PM »

Yes it’s the long term performance that matters.  In the 70s Hohner were very innovative in many ways and used a new adhesive for valves.  I’ve no idea what it was,  but I’m still wary of instruments where it was used where the valves tend to drop off and the root of the reeds suffer an unusually large degree of corrosion.
I am not a professional-as in not earning a living from this- but;
I have seen a lot of Hohner from 70s/80s mainly erica's and 60 % of them had the very same problem..whatever the glue Hohner used back than on plastic valves corroded and badly damaged the reeds beyond my liking and didn't even bother cleaning.
I don't think it's just how long/strong glue holds but how it reacts on plastic,aluminum and steel combo,as well as holding for years without failing...I have also seen a cement like glue on plastic valves which tend to dry and let go of the valves very easily.if you seen a lose valve under the pallet or inside fold of the bellow ?probably it's because of the cement thingy failed.and if you seen a badly rusted corroded reed it's because of that horrible glue Hohner used,so strong it melts the steel reed. 
contact /impact glue works well for me.
 
               
Logged
Pages: 1 2 [3]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal