Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Rusty Reeds  (Read 2719 times)

0 Members and 1 Guest are viewing this topic.

PhilD

  • Member
  • *
  • Offline Offline
  • Posts: 14
    • Philleann - Soundcloud
Rusty Reeds
« on: May 29, 2019, 06:52:09 PM »

Hi, I picked up a Hohner Club ll in Bb Eb that's in need of a lot of TLC, a complete overhaul in fact, but I wanted to ask the best way of tackling the rust on some of the reeds?



*Edited to fix my dyslexic mistakes!
« Last Edit: May 30, 2019, 12:32:08 AM by PhilD »
Logged
A little local band i'm in bellowbridge

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Rusty Reeds
« Reply #1 on: May 29, 2019, 07:51:16 PM »

Depends on the extent of the rust, but I find a fibreglass brush (you can get  them in various sizes) useful. The one I use most is about 3mm (eighth of an inch or so) in diameter.  Faced with a heavily rusted reed I'd probably shift the worst corrosion with a fairly fine emery board before using the brush. Make sure you work in a well-ventilated space, wear a facemask (a simple DIY-shop one will be OK) and vacuum up as much of the debris as you can afterwards.

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

John MacKenzie (Cugiok)

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2360
  • Fettling... Learning to reed and right.
Re: Rusty Reeds
« Reply #2 on: May 29, 2019, 07:52:52 PM »

Yes indeed, please be careful round those fibreglass brushes, and NEVER use one without a mask on.

SJ
Logged
There is no beginning to my talent :)



: Hohner Club Modell 1. Bb/Eb, de-clubbed : Early Hohner Pressed Wood A/D : 1930's Varnished wood G/C:  Hohner Erika C/F: Bandoneon tuned D/G Pressed wood: Koch F/Bb; G/C Pre Corso

Grumpy

  • Grumpy
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 134
Re: Rusty Reeds
« Reply #3 on: May 29, 2019, 08:52:20 PM »

Just as an aside, if using a fiberglass pencil (or any other fiberglass) and get fibers in your fingers or hands (you should have worn latex gloves !), but that apart wash your hands in COLD water. If possible add ice, the fiberglass will come out, an old trade trick.
Logged
Chris D, Surrey, UK
Getting old but still learning. Pokerwork G/D, Saltarelle L'Elfique G/D, Castagnari Lilly G/D and Hohner Liliput Declubed G/D + English concertinas, mandolins, recorders, tin whistles and other items unknown to household managment

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Rusty Reeds
« Reply #4 on: May 30, 2019, 12:15:30 AM »

I find Evapo-Rust works very well.  https://evapo-rust.com/

Not sure it's available outside North America but there must be other similar products around.
Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

PhilD

  • Member
  • *
  • Offline Offline
  • Posts: 14
    • Philleann - Soundcloud
Re: Rusty Reeds
« Reply #6 on: May 30, 2019, 12:36:58 AM »

I find Evapo-Rust works very well.  https://evapo-rust.com/
Not sure it's available outside North America but there must be other similar products around.

I'm in Oregon.   I do have a WD40 solution that claims to do the same thing,  but I wasn't sure how the zinc plated reeds would react.
« Last Edit: May 30, 2019, 12:42:26 AM by PhilD »
Logged
A little local band i'm in bellowbridge

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Rusty Reeds
« Reply #7 on: May 30, 2019, 08:16:51 AM »

I’ve used Evaporust, though not on reeds.  Remarkably effective. 

For cleaning reeds I use polishing blocks which are abrasive in a rubbery material. Available from metal finishing and jewellery suppliers,  for example https://www.moleroda.com/product/abrasive-rubbing-blocks-garryflex/
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Rusty Reeds
« Reply #8 on: May 30, 2019, 08:29:31 AM »

Does Evaporust work the white aluminium oxidation?

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Rusty Reeds
« Reply #9 on: May 30, 2019, 08:42:05 AM »

Evapo-rust works because it contains a chelating agent - an organic compound which forms a preferential bond with the ferric Fe3+ oxide which forms the rust. The iron/organic complex is water soluble and can be washed and rinsed away. EDTA, some sugars and proteins are efficient chelating agents and have the advantage of being of low toxicity to animals (including humans) and the general environment.

Some people have used molasses successfully to remove rust from tools, etc., by soaking them in a water solution of molasses for a few hours or days. The safety chemical data sheet for Evapo-rust indicates the composition: water >83%, chelating agent (unspecified as a commercial secret) <16%, detergent <1%. I guess the detergent is there simply as a wetting agent.

I think it would be worth experimenting with a solution of molasses and a drop of washing-up liquid as a rust removal agent for reeds. It's not going to harm them or the reed plate. I have a few scrap rusty reeds so I might give it a go and report back.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Rusty Reeds
« Reply #10 on: May 30, 2019, 08:43:53 AM »

Does Evaporust work the white aluminium oxidation?
Probably not beause the chelating agent specifically binds to ferric Fe3+ ions. I think you would need to research chelating agents which would bind to aluminium oxides.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Rusty Reeds
« Reply #11 on: May 30, 2019, 08:55:24 AM »

Anyone tried Coke as a de-ruster seems to appear on t'internet as a successful use for the teeth rotting drink?

Maybe I should give it a try.

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Rusty Reeds
« Reply #12 on: May 30, 2019, 09:24:13 AM »

Anyone tried Coke as a de-ruster seems to appear on t'internet as a successful use for the teeth rotting drink?

Maybe I should give it a try.
Coca cola removes rust because it contains phosphoric acid which converts the ferric iron in the rust Fe3+ to ferric phosphate FePO4 which then forms a barrier preventing further oxidation to rust. I'm not sure that the phosphoric acid method is desirable in treating reeds because of the phosphate conversion, which may then have different structural properties to the original spring steel. Also once started, the phosphorisation process is difficult to stop without the addition of an alkali, such as sodium carbonate or sodium hydroxide just at the right time.

The Evapo-rust chelation process is better in this respect as it simply removes rust and leaves the unrusted steel un-touched (and therefore its structural properties intact).

I think coca cola or phosphoric acid would be good for removing white aluminium oxide from reed plates as per Roger's query. Reed plates do not need to have such a critical structural strenght as the steel reed tongues. However, beware of using strong alkali to neutralise the excess phosphoric acid; it will react with the aluminium, evolving hydrogen in the process. Better to use a mild alkali such as baking soda (sodium bicarbonate) and then rinse with plenty of water.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Rusty Reeds
« Reply #13 on: May 30, 2019, 09:50:24 AM »

Better to just use mechanical methods IMHO.  Any chemical cleaners need to be very thoroughly rinsed away or neutralised.  Tiny traces of active chemicals in and around the crevices where the reed head is riveted has the potential to start up long term corrosion problems.  Mechanical cleaning (fibreglass pen or polishing block) have no such downside.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Rusty Reeds
« Reply #14 on: May 30, 2019, 10:55:15 AM »

As usual I think Theo has the best answer here!
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

invadm

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 613
Re: Rusty Reeds
« Reply #15 on: May 30, 2019, 11:03:47 AM »

Better to just use mechanical methods IMHO. Mechanical cleaning (fibreglass pen or polishing block) have no such downside.
I'm with Theo..
I am not a professional reed technician however I spend most of my free time working on boxes, I have tried many stuff to remove rust from metal using many different product,mechanical as well as chemical,best stuff for reeds I found is polishing blocks. cheap to but,easy to use,no side effect or hazard, u can cut it to size so it fits in the reed slot for inside of the reeds.a few run and off you go,once finish cleaning you can give a acetone bath to your reeds if you like shiny and clean reeds like new. 
all other chemical stuff I used had a reaction on reeds,some you can see strait away some a few month later,
ps; if anyone uses Deox-C wach out for your springs  :(  I've left a rusty treble mechanism in it over night and most of the spring melted away in the morning :-\                           
Logged

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: Rusty Reeds
« Reply #16 on: May 30, 2019, 09:54:08 PM »

For the white aluminium oxide I would just use a cotton cloth damped with methylated or white spirit.
The dampening seems to loosen the aluminium oxide powder a little, in the same way the water in a wet cloth loosens mud dried on a tiled floor.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Rusty Reeds
« Reply #17 on: May 30, 2019, 10:10:39 PM »

For white aluminium powder I use a wire brush. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

PhilD

  • Member
  • *
  • Offline Offline
  • Posts: 14
    • Philleann - Soundcloud
Re: Rusty Reeds
« Reply #18 on: May 31, 2019, 02:08:01 AM »

Thanks for all the advice everyone!
Logged
A little local band i'm in bellowbridge
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal