Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Hello and a question about bass reeds  (Read 2842 times)

0 Members and 1 Guest are viewing this topic.

Jon Stapleton

  • Member
  • *
  • Offline Offline
  • Posts: 44
Hello and a question about bass reeds
« on: May 31, 2019, 11:47:35 PM »

Firstly hello and thanks for letting me in.
I have been mucking about with melodeons for a few years now, and have lurked around here for a while. I have read  a lot of the old posts melodeon.net really does seem to be a fantastic resource.

So on to my question
I am generally happy with the sound of my (mostly hohner) herd but something has been bugging me for some time.
Harsh sounding basses!   I have tuned all of my melodeons myself and the treble and chords all sound ok to me but on one box in particular it doesn't matter how carefully I tune the bass it always sounds hard.
It is an old club 1 with large bass reeds marked with an H with brass weights,  I have another club 1 with smaller  bass reeds with a T stamped on them but no brass weights and this is as sweet as you could wish for.
I just wondered if anyone here knows the cause of this or whether it is just what those reeds sound like
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hello and a question about bass reeds
« Reply #1 on: June 01, 2019, 08:42:14 AM »

Do you think it is a tuning problem and if so are you tuning the reeds on a tuning table, or inside the instrument?

It could be noisy valves, reeds not securely fixed by wax.  Hohner bass reed blocks sometimes crack between the bottom plate and the upright part.

Some Hohner bass reeds just sound a bit harsh, though not usually the zinc plate ones found on old club boxes.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Jon Stapleton

  • Member
  • *
  • Offline Offline
  • Posts: 44
Re: Hello and a question about bass reeds
« Reply #2 on: June 03, 2019, 08:35:45 AM »

Thanks for the reply

these have been re-waxed with new valves and i have made sure that the reeds themselves are straight as well as setting the gap as close as i can without making them choke.  is there anything i have missed or do i just need to accept that these may just be bad-uns :-)
i have two boxes with this symptom and on both it is the highest bass reeds affected.  When i look on the tuner these "hard" reeds have several harmonic spikes up through the range whereas the "sweet" ones have fewer additional harmonic spikes.
Logged

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Hello and a question about bass reeds
« Reply #3 on: June 21, 2019, 08:32:19 AM »

If those are the really long reeds that hohner used then you might try replacing that higher reed with a smaller italian one of the same note.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

Jon Stapleton

  • Member
  • *
  • Offline Offline
  • Posts: 44
Re: Hello and a question about bass reeds
« Reply #4 on: June 22, 2019, 08:57:35 PM »

It does seem to be the higher reed which has that "hard" harsh sound.  Have you come across this?   Where would be best to get a reed to replace them from.  Not worried about the dimensions as i am sure i can adapt the block if necessary
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hello and a question about bass reeds
« Reply #5 on: June 22, 2019, 10:23:41 PM »

You could try tuning the reed down by an octave.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Hello and a question about bass reeds
« Reply #6 on: June 23, 2019, 09:16:16 PM »

I probably have the reed in my hoard. where are you and what notes?
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

Jon Stapleton

  • Member
  • *
  • Offline Offline
  • Posts: 44
Re: Hello and a question about bass reeds
« Reply #7 on: June 23, 2019, 10:19:24 PM »

On the club it is the Bb and the G which are the worst.  i am in cornwall UK but now you come to mention it I fancy replacing all 4 so if you know of a supplier you could recommend it would be really useful
Logged

Jon Stapleton

  • Member
  • *
  • Offline Offline
  • Posts: 44
Re: Hello and a question about bass reeds
« Reply #8 on: June 23, 2019, 10:22:28 PM »

You could try tuning the reed down by an octave.

Why didn't I think of that?  I am going to give that a go with a spare and see how it sounds.   I also like Kimric's idea failing that.
Logged

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Hello and a question about bass reeds
« Reply #9 on: June 23, 2019, 11:08:56 PM »

On the club it is the Bb and the G which are the worst.  i am in cornwall UK but now you come to mention it I fancy replacing all 4 so if you know of a supplier you could recommend it would be really useful

Why not talk to Microbot, of this parish, aka Mike Rowbotham? He's in St Ives. He is very knowledgeable and very helpful and a very competent fettler.

And, Charlie Marshall (CGM music) is the go to place for Hohner parts.
« Last Edit: June 23, 2019, 11:11:08 PM by Tone Dumb Greg »
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Jon Stapleton

  • Member
  • *
  • Offline Offline
  • Posts: 44
Re: Hello and a question about bass reeds
« Reply #10 on: July 19, 2019, 08:46:37 AM »

I have been doing a bit of shopping around and have confused myself further.   A lot of people on the forum recommend Harmonikas reeds so i have a price list from them.  But the only reed type which is listed as Harmonicas (diatonic) is the DIX range which is a bit pricey (not that i am a skinflint you understand).   Is this the range people here on the forum use,  or is it that you use a normal unisonoric reed and tune them to suit?   I was going to have a go with the Tipo a Mano range to see how i got on  but if i end up having to add weights to the reed tips on new reeds i feel like i am pretty much shooting myself in the foot at the outset!
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hello and a question about bass reeds
« Reply #11 on: July 19, 2019, 09:01:44 AM »

You have to send a reed spec to Harmonikas,  listing the pitches for each reed plate.  They will then send you a price.  They should be able to give you prices for various reed qualities based on the same reed spec.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Jon Stapleton

  • Member
  • *
  • Offline Offline
  • Posts: 44
Re: Hello and a question about bass reeds
« Reply #12 on: July 19, 2019, 10:26:25 AM »

Thanks Theo   

I think we may just be having translation issues I will be more specific in my request!
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hello and a question about bass reeds
« Reply #13 on: July 19, 2019, 11:28:37 AM »

It’s best to make a table listing the reeds.  Harmonikas have a numeric code for each pitch which is available somewhere on their website.  Use that with the note name to ensure you get the correct notes in the correct octave.   Italian makers also have a numeric pitch code but it’s different so make sure you use the correct one!
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Jon Stapleton

  • Member
  • *
  • Offline Offline
  • Posts: 44
Re: Hello and a question about bass reeds
« Reply #14 on: December 08, 2019, 11:08:20 PM »

At risk of resurrecting an old thread... i bought some Harmonikas reeds but they are still in the packet. Based on the fact that the sweetest sounding bass reeds seem to have less pronounced harmonics (although the ones with the spikes at octaves sound wonderful)  i have been mucking about with old bass reeds and have tried all sorts to try to prevent the reed from "whipping",   stiffening up the reed by soldering bits to it,  softening the rivet end and bringing back up at the tip etc etc.  What does seem to have made an improvement   maybe 50% . ( utterly subjective i know) .  is to file the very tip back by something in the region 1/4 mm i.e a tiny bit to increase the clearance by a gnats whatsit.  Not too much or the reed doesn't respond quickly enough . anyway worth a try!  It has fixed the old club where the Bb now sounds as nice as the rest of it's mates.
I have noticed that on longer reeds especially in really old boxes that the tip sometimes fouls the slot,  i can only assume that this is due to creep on the rivet over time?
Anyway . if you have a "hard" sounding bass reed on an ancient hohner this may be worth a try
Now kicking myself that i didn't do a before and after recording -  ho hum
Logged

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Hello and a question about bass reeds
« Reply #15 on: December 09, 2019, 05:02:45 PM »

That trick reminds me of one that is used on pump organs to get a mellower tone. looking at the reed from the tip grab it with a small pair of pliers and twist it along its length so it is rotated 1-2 degrees. This makes the air cutoff when the reed passes through the slot less sudden so the tone is less sharp.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hello and a question about bass reeds
« Reply #16 on: December 09, 2019, 05:12:53 PM »


I have noticed that on longer reeds especially in really old boxes that the tip sometimes fouls the slot,  i can only assume that this is due to creep on the rivet over time?


Contact between reed tongue and frame can happen for various reasons.  The most common I've found is a burr on the edge of the reed from filing, or in the case of older reeds it can be a spot of rust on the edge of the tongue.  In the best quality reeds the clearance is very small, so these tend to be more prone to contact problems. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Jon Stapleton

  • Member
  • *
  • Offline Offline
  • Posts: 44
Re: Hello and a question about bass reeds
« Reply #17 on: December 09, 2019, 10:15:33 PM »

That trick reminds me of one that is used on pump organs to get a mellower tone. looking at the reed from the tip grab it with a small pair of pliers and twist it along its length so it is rotated 1-2 degrees. This makes the air cutoff when the reed passes through the slot less sudden so the tone is less sharp.

I have just tried that   and it works  Thanks  :D
Logged

Dave May

  • New Starter
  • Offline Offline
  • Posts: 3
Re: Hello and a question about bass reeds
« Reply #18 on: January 06, 2026, 05:17:40 PM »

A bit late to the party, but- yes- it does work for bass reeds that are a bit too raucous. I have twisted a few by maybe 10 degrees and needed a bit of edge filing to pass cleanly through the slot; but they certainly toned down.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal