Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Bandonika!  (Read 2606 times)

0 Members and 1 Guest are viewing this topic.

Elliot Warburton

  • Member
  • *
  • Offline Offline
  • Posts: 34
Bandonika!
« on: June 29, 2019, 11:22:16 PM »

I just acquired a three row 12 bass GCF bandonika (a melodeon in a bandoneón type form factor). Even though it’s sort of in playable condition I’d still like to do it up and make it proper playable.
My main gripe is the reed situation. They’re ‘dix’ reeds which according to the stamp on the casing are of highish quality but the thing is, they’re mounted on...:
gLuEd In ReEdBlOcKs !
Yet again I have been foiled in my well meaning attempts at restoration... or have I? I’m wondering what the general methodology for dealing with these is. I guess, to tune it, I ought to take out all the reeds (it’s tuned in the bandoneón octave LM sort of way) and tune them individually somehow. Or, should I somehow de-glue the reed blocks? That seems like it might be beneficial. I’m aware that I’ll still have to tune them again when they’re waxed back in.
Second issue is the buttons- they’re all wobbly and glued in on pieces of leather attached to the pallet arms. Again, they work but it all seems rather odd.
The bellows definitely maybe probably need re-taping. From what I’ve heard it doesn’t sound like a pleasant job but I’m not even sure how useful it will be- how vastly does it remedy leakiness? A bellows corner needs replacing too and I’m not 100% sure how to do that.


Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Bandonika!
« Reply #1 on: June 29, 2019, 11:46:52 PM »

Hi Elliot.
I'm not all that good at repairs on melodeons, but I get by (after a fashion!) with my own. However, the only time that I tried to remove glued in blocks resulted in the box being scrapped!
Neither have I tried tuning the "in-between" reeds, preferring to persuade our Dear Leader to do it for me. In saying that, the "nack" could well click with you straight away! I haven't mastered it yet, and doubt that I ever will!
Good luck, whatever you decide to try.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Elliot Warburton

  • Member
  • *
  • Offline Offline
  • Posts: 34
Re: Bandonika!
« Reply #2 on: June 29, 2019, 11:50:12 PM »

Thanks Winston  (:)
Logged

Sebastian

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1056
Re: Bandonika!
« Reply #3 on: June 30, 2019, 08:31:36 AM »

They’re ‘dix’ reeds which according to the stamp on the casing are of highish quality
DIX reeds are indeed high quality reeds. They should be mounted on zink plates (instead of aluminium). Zink gives a better, fuller, sound, but sometimes over time tends to zinc bloom.

Quote
they’re mounted on...: gLuEd In ReEdBlOcKs !
That's the normal way to do it.

Quote
I guess, to tune it, I ought to take out all the reeds (it’s tuned in the bandoneón octave LM sort of way) and tune them individually somehow.
Fine tuning of reeds has to be done in situ, that is, when the reeds are mounted. LM tuning is the normal tuning.

Quote
should I somehow de-glue the reed blocks?
No.

Quote
the buttons- they’re all wobbly and glued in on pieces of leather attached to the pallet arms.
That's the normal way to do it.
Logged

Elliot Warburton

  • Member
  • *
  • Offline Offline
  • Posts: 34
Re: Bandonika!
« Reply #4 on: June 30, 2019, 10:46:26 AM »

I know it’s all supposed to be like that but I still need to re-valve it and the only way to do that is to take out and then re-wax all the reeds. Or at least it seems that way to me. So, taking that into account is it worth tuning the reeds outside the box too? tuning in situ seems tricky and though I will attempt it (and it will probably be needed what with the LM (which I know is what it’s supposed to be considering it’s like a pseudo bandoneón) tuning being really hard to get dead on).
And I still don’t get this leather mounted button thing- doesn’t it just make them wobbly? Or is it so they can just fit into the button holes easily. If a button needs to be replaced, what should I replace the leather with?
« Last Edit: June 30, 2019, 10:48:17 AM by Elliot Warburton »
Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Bandonika!
« Reply #5 on: June 30, 2019, 11:48:54 AM »

Another possibly unhelpful reply from me, I think:

I have a reasonably nice looking 3 row German concertina with buttons like that. It's another project which never seems to come to the front of the shelves. In all honesty, why would I give myself a load of grief fixing up something which I've already decided that I don't like because of poor or awkward design? It might just go on eBay the way it is, one day when I decide to try to make more space!

Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Bandonika!
« Reply #6 on: June 30, 2019, 01:30:14 PM »

The leather mounted buttons are to allow them to float in the hole as the lever moves up and down. On a Bandoneon some (not all) of the buttons are mounted like this.
But for the reeds...Remove the reeds, clean, revalve then check/tune on a tuning table (you need some old bellows and some plywood for this). This will get the tuning quite close...and even maybe close enough for your restoration project.
You could tweak the tuning with the reeds in situ, but you need either a tuning bellows rig, or lift the end on and off the actual bellows.
If the reeds are mounted vertically you will need to master how to get at the inside reed (I use a hook). If they are mounted flat this is either v hard to do or not possible. One trick is to masking tape the loose reed in place, check tuning, pull it off, tweak the reed, repeat.
But tuning with reeds in situ is quite advanced, so my (personal) advice is to get the tuning as good as you can on the tuning table.  Also...it depends on the condition of the reeds. If they are in reasonable condition you'll find that revalving and reassembling is almost good enough...it does depend of course on the level of accuracy you want. But octaves that are off howl a bit, esp the higher notes. So when tuning you need to sound them together and work out which one needs altering to bring the octave into tune. So as a starter project that you have some hope of succeeding with...take off the reeds, check/tweak the tuning, replace. Also..when replacing, just wax them in enough to hold and check the tuning, so you can easily pull them off and tweak the tuning. Unless they are held on with pins. The Bandoneon and Chemnitzer I have worked on don’t use wax.

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Bandonika!
« Reply #7 on: June 30, 2019, 01:35:29 PM »

I know it’s all supposed to be like that but I still need to re-valve it and the only way to do that is to take out and then re-wax all the reeds. Or at least it seems that way to me. So, taking that into account is it worth tuning the reeds outside the box too? tuning in situ seems tricky and though I will attempt it (and it will probably be needed what with the LM (which I know is what it’s supposed to be considering it’s like a pseudo bandoneón) tuning being really hard to get dead on).
You will need to tune the reeds in situ. You  risk perhaps removing more steel than needed if you try to tune with the reed plates off the blocks.

You have chosen (inadvertantly perhaps) a tricky instrument to begin learning your restoration and tuning skills on. I would recommend an interim stage of getting hold of a bog-standard two-row melodeon cheaply (E-bay or similar) and work on that first of all and get some experience before moving on to the bandonika and perhaps causing irreperable damage to a nice set of reeds.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Bandonika!
« Reply #8 on: June 30, 2019, 01:58:33 PM »

I would recommend an interim stage of getting hold of a bog-standard two-row melodeon cheaply (E-bay or similar) and work on that first of all and get some experience

Shouldn't that be "piano accordion cheaply", as suggested many times before on melnet, and for the entirely practical reason that they come cheaper.
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

invadm

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 613
Re: Bandonika!
« Reply #9 on: June 30, 2019, 03:30:16 PM »

if you wish this box to be a 'keeper' do what you can outside of the box;cosmetically,bellows tape,pallet facing so on..  and leave the reeds and tuning to an expert! you;ll save a lot of time and those lovely DIX reeds too  ;)
 
Logged

Elliot Warburton

  • Member
  • *
  • Offline Offline
  • Posts: 34
Re: Bandonika!
« Reply #10 on: June 30, 2019, 03:52:28 PM »

I’ve got tuning stuff already and I’ve had a bit of practice on various old thing’s I’ve acquired. As said here, melodeons for some reason do not oft come cheap (on eBay etc) even in very poor condition so this seems my only bet for the moment. The reeds are currently kept in by pins and wax so I’ll try putting them back in first time over with just the pins. I’ve got all the necessary valves etc, never done ‘in situ’ tuning properly (with the reed lifter, I made the kind that’s like a hook and I’ve tried to use it but it always makes me nervous about breaking reeds). I’ll be v careful and stop if I ought because I don’t want to cause any irreperable damage.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Bandonika!
« Reply #11 on: June 30, 2019, 05:29:50 PM »

I don’t think there is any point in tuning with the reeds off the blocks first unless they are very bad  or you have to tune up from 435 to 440.

By the way I’m an experienced tuner,  been doing it for a living for about 15 years - and in my experience bandoneon family instruments are the most difficult.  The reasons:-
Tuning must be done in the instrument,
Bandoneon tuning is the hardest to get right
Dix type reeds seem to me more prone to pitch varying with pressure, which can be especially troublesome with bandoneon tuning
and on top of that there is just a very large number of reeds.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Bandonika!
« Reply #12 on: June 30, 2019, 06:56:02 PM »

I mentioned a reed hook...which is like one of these, and they are v kind to the reeds and can be used on reeds sitting in awkward places. I tried using the other method, which some tuners are comfortable with...but all I ever did was bend the reeds. In fact I made several from piano wire, of different sizes, having bought one. They have a very specific shape, which I then copied. It takes a bit of practice but it ain’t impossible. Spend an hour or so practicing with it and you'll be able to lift inner reeds.
http://www.cgmmusical.co.uk/CGM_Musical_Services/Reed_Tuning_Tools.html#5

folkloristmark

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 582
    • street entertainers
Re: Bandonika!
« Reply #13 on: June 30, 2019, 07:08:29 PM »

Entirely depending on construction and ease of removal you can remove the pallet mech completely and reface as well, and then have a flat face to meet the tuning table. No good if glued and nailed.You need to get nifty with a reed lifter.At least its only two voice dry tune for a bandoneon.Also could be old 436 0r 446(Bandoneon old philharmonic) could be best to stick with whatever.Good luck it is not an easy starter box to fettle.

« Last Edit: June 30, 2019, 08:21:31 PM by folkloristmark »
Logged
Mark Taylor
Folkloristmark

Elliot Warburton

  • Member
  • *
  • Offline Offline
  • Posts: 34
Re: Bandonika!
« Reply #14 on: June 30, 2019, 08:40:18 PM »

Yeah, it seems more and more difficult the more I think about it... well all the reeds are all out of the box now anyway (they all need re-valving anyway too) and I’ve noticed yet another thing that might be easier to remedy than other issued previously presented: the reeds are filthyyy! Like not even rusty just a lot of dirt and various other things like that, maybe rust but not very much at all. Reccomendations for cleaning? I was thinking an ultrasonic jewelry cleaner or something as I’ve read somewhere of them being used for similar purposes.
I would buy an eBay melodeon but my parents are becoming worried I might start ‘collecting’ instruments haha... I don’t intend to start doing so, however, as I’m a student and apparently ought to be focusing on other things  :D
Logged

folkloristmark

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 582
    • street entertainers
Re: Bandonika!
« Reply #15 on: June 30, 2019, 08:57:20 PM »

Hi are we talking this. Pic.They are melodeon come bandoneon look alike.

With those buttons they are glued wood to wood- leather -wood to wood, with the leather between the bonds. This is correct and dont change design as it allows some float, so they dont get stuck like a good chinese concertina, sometimes one outer row might not have the leather.(large bandoneons?) With an old box they can become very floppy and the leather parts you may find as you play it more they wobble and start falling off. You just replace the leather with a bond either side.Its a judgement how far you go. You can vary the thickness as you go to allow an even button height. use a slow dry, high tack, reverseable glue. Hide glue is what was used and allows changes before it dries.With the age you will find the glue is easy to part but dont strip the wood. The leather will rip and the residue can be sanded if needed.As you will open the box countless times a bent block nail ralway spike can be used to keep the buttons in the cover and twisted to remove. It may be like that already good or ther will be a nail or screws doing the job locate part and replace to avoid the pain of cover comming off and the curse of the butons reassembly when not needed.

The assembly hopefully is mounted on two wooden bars that screw from the innerface so it will come off if needed in one piece with all the springs pallets bars and rods in situ. If glued hard luck the tuning table will be defeated
kind regards
Logged
Mark Taylor
Folkloristmark

folkloristmark

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 582
    • street entertainers
Re: Bandonika!
« Reply #16 on: June 30, 2019, 09:00:21 PM »

Honestly the easy thing is to soak them in a spirit meths parafin alchol etc then dry well.If they were posh then others will advise?

With the tuning if you have a table top that can replace the entire end and seal you can do alot of the work as least on the outer reeds from the open end.Look up the method of concertina tuning etc
« Last Edit: June 30, 2019, 09:11:17 PM by folkloristmark »
Logged
Mark Taylor
Folkloristmark

folkloristmark

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 582
    • street entertainers
Re: Bandonika!
« Reply #17 on: June 30, 2019, 09:14:10 PM »

Ps it might be a bit late but cure all air leaks and air loss first and try and stay on top of this as you keep opening it, and then opening it before opening it :-\
Logged
Mark Taylor
Folkloristmark

Elliot Warburton

  • Member
  • *
  • Offline Offline
  • Posts: 34
Re: Bandonika!
« Reply #18 on: June 30, 2019, 10:49:21 PM »

All reeds are out and all the blocks are cleaned up- one of them was removable! The bass end chord block had a regular latch type thing on it keeping it in so that’s nice. The action is indeed screwed in and thank you very much for that button related advice, they’re very wobbly so I might replace the leather (with what leather from where, I don’t know).
I guess I’ll revalve then tune all the reeds outside the box to something like 2 or so cents within the right tuning (A 440 Equal Temperament- it’s boring but hey ho), then wax everything in then tune in the blocks with the action taken off the top to within like 1.5 cents or something and then put everything back together and then see ?
The only proper leak is a funny bellows corner which is probably replace-able but other than some bellows retaping that’s about all that might help- the original gaskets are very thin but seem to work fine leak prevention-wise.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Bandonika!
« Reply #19 on: July 01, 2019, 07:09:25 AM »

Tuning: recommend that you pre-tune outside the box to between 5 and 10 cents sharp. Then when they are in place you only have to tune down which is much easier, especially as you don’t have to lift the inside tongues.
« Last Edit: July 01, 2019, 09:01:52 AM by Theo »
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal