Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: where did my volume go and why?  (Read 2050 times)

0 Members and 1 Guest are viewing this topic.

invadm

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 613
where did my volume go and why?
« on: July 02, 2019, 12:06:32 PM »

Following a recent topic;
I have noticed considerable amount of loss volume on some of my Hohners after new pallet facings and tuning and just wondering why ?
most of my boxes are out side boxes and volume is a MUST have for me,after usual Hohner remedy,new pallets facing,valves,wax and tune to A 440 (by a professional tuners NOT me ) I have noticed on some of my boxes volume isn't there and more  :(    why ? and how can one make a box Lauder to play out side with out a mike ?
 
Logged

Eshed

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 447
Re: where did my volume go and why?
« Reply #1 on: July 02, 2019, 01:00:13 PM »

Since pallet refacing meddles with action, it might have been reset too low, which means the pallets don't open enough to allow a louder volume
Logged
Do you have a Hohner from 1934-1945 with a serial number on?
Send me a private message or comment on the German Accordion Problem spreadsheet to improve the statistics of the project and get an estimate of the production date of the box if it is not known.

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: where did my volume go and why?
« Reply #2 on: July 02, 2019, 01:01:17 PM »

It is possible that the action was not adjusted correctly after the refacing and therefore the pallets are not lifting as far as they used to thus reducing the volume. Do the buttons lay closer to the fingerboard than they used too?

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: where did my volume go and why?
« Reply #3 on: July 02, 2019, 01:17:06 PM »

It is also possible that when you replace a hard leather-on-wood pallet facing with a thicker felt-backed facing, the new facing will absorb more of the high harmonics, making the sound less bright? That pallet facing is right in the path of all the sound that comes out, where the sound pressure level is highest, so it must absorb some sound.
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

invadm

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 613
Re: where did my volume go and why?
« Reply #4 on: July 02, 2019, 02:27:44 PM »

Since pallet refacing meddles with action, it might have been reset too low, which means the pallets don't open enough to allow a louder volume
I use just over 2mm thick facing; 1mm felt- 1mm leather,I guess glue adds a little more so total thickness no more than 2.5 mm, I always remove the mech and glue a 2 mm thick balsa wood strip under the mech in order to to keep the height between palette and the body- as close as possible to the original height- . once finished whole mechanism and the keyboard rises the same amount.
as for button height ; again I try to keep close as possible to the original some times even higher.
may be just the new soft felt absorbs the sound as Anahata points out? I don't know.           
           
Logged

Frank Pallister

  • Good talker
  • **
  • Offline Offline
  • Posts: 62
Re: where did my volume go and why?
« Reply #5 on: July 02, 2019, 02:31:27 PM »

when retuned did you have the wide hohner tremolo reduced as this will usually reduce volume
Logged

invadm

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 613
Re: where did my volume go and why?
« Reply #6 on: July 02, 2019, 02:49:39 PM »

when retuned did you have the wide hohner tremolo reduced as this will usually reduce volume
that was mention a few time here if I remember correctly; wet box sounds louder..I like full Hohner sound and fist thing I ask from my tuner is ''full Hohner sound''..the box prompt me to start this is 'wet' just not loud as it was before, it's CF Koch.
   
Logged

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: where did my volume go and why?
« Reply #7 on: July 02, 2019, 03:32:41 PM »

I rather doubt that refaced pallets are the cause of the problem. It couldn't do any harm to check that your reedblocks are properly aligned, fastened and connected.
Logged

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: where did my volume go and why?
« Reply #8 on: July 02, 2019, 11:50:05 PM »

Quote
I always remove the mech and glue a 2 mm thick balsa wood strip under the mech in order to to keep the height between palette and the body
Doesn’t this push the buttons 2mm outwards I.e. they don’t line up with the holes, or do you also shim the keyboard by 2mm?

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: where did my volume go and why?
« Reply #9 on: July 03, 2019, 08:12:58 PM »

I took it as shimming the whole keyboard / pivot block assy out but you've made me wonder now ??
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: where did my volume go and why?
« Reply #10 on: July 03, 2019, 09:02:20 PM »

What I meant was..the lever is L shaped, with a pallet on one end and a button on the other. If you raise the pallet by 2mm (by lifting the axle/lever pivot mechanism, surely this will lift the buttons...but horizontally in relation to the keyboard, so the buttons won’t be centred in the holes? I think you’d notice this if it happens.
« Last Edit: July 03, 2019, 09:04:05 PM by RogerT »
Logged

invadm

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 613
Re: where did my volume go and why?
« Reply #11 on: July 04, 2019, 09:23:03 AM »

Quote
I always remove the mech and glue a 2 mm thick balsa wood strip under the mech in order to to keep the height between palette and the body
Doesn’t this push the buttons 2mm outwards I.e. they don’t line up with the holes, or do you also shim the keyboard by 2mm?
whole thing rises by 2mm, mech and keyboard, I add the same 2mm wood under the key board..on plastic keyboards less as the holes are big enough but wooden keyboards same wood goes under the keyboard.     
Logged

invadm

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 613
Re: where did my volume go and why?
« Reply #12 on: July 04, 2019, 09:40:37 AM »

I rather doubt that refaced pallets are the cause of the problem. It couldn't do any harm to check that your reedblocks are properly aligned, fastened and connected.
I will double check alignment and fighting properly..I know for sure there is a connecting metal bar on top of the reed blocks.       
Logged

Microbot

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 345
Re: where did my volume go and why?
« Reply #13 on: July 04, 2019, 10:48:43 AM »


[/quote]
..I know for sure there is a connecting metal bar on top of the reed blocks.     
[/quote]

Hi Invadm,

Before doing anything else, simply detach/remove the strut across the treble reedblocks, put the box back together and play the instrument like that....You may be surprised at the result...

...also I have found that new pallet facings subtly alter the tone of an instrument, I think for exactly the reasons Anahata suggests above.

Cheers

Mike R
Logged

invadm

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 613
Re: where did my volume go and why?
« Reply #14 on: July 04, 2019, 11:55:49 AM »

Hi Mike, some degree of changes after new facing is expected and I am OK with that,I notice the changes before and after and usually happy with the sound, this box however has much less volume than the others that has gone thru the same process with same material + same tuner too.
I'll remove the bar and see how it goes.
         
Logged

playandteach

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3526
  • Currently a music teacher in a high school.
Re: where did my volume go and why?
« Reply #15 on: July 04, 2019, 12:49:42 PM »

Could it just be that you have a leak somewhere unrelated - are the bellows as tight as before?
Logged
Serafini R2D2 GC, Serafini GC accs 18 bass

invadm

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 613
Re: where did my volume go and why?
« Reply #16 on: July 04, 2019, 01:02:38 PM »

Could it just be that you have a leak somewhere unrelated - are the bellows as tight as before?
there is no leak, if anything it's too tight  (:) ..
the only thing I have left to try is changing the gasket under the reed blocks to something rigid like Charlies olivisc and see how it goes         
Logged

Martyn

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 455
  • Hohnerohner
    • Martyn White Melodeon Tuning and Repairs
Re: where did my volume go and why?
« Reply #17 on: July 23, 2019, 12:14:15 PM »

Hi Mus,
Don't forget the Koch has zinc reed plates which are a bit quieter and warmer sounding than aluminium plates.
The Koch is basically a Hohner Club Modell 1 which are not very loud boxes but have a lovely 'round' tone.
Logged
'Anything from a small repair to a full restoration'.
www.melodeonrepairs.co.uk

invadm

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 613
Re: where did my volume go and why?
« Reply #18 on: July 23, 2019, 02:34:20 PM »

Hi Martyn, you might be right ,it could be the zinc reeds , I know most people like the sound of zinc plates but as you already know I like and prefer aluminium reeds (:)
I'll bring you the box along with others on my next visit for advise... I'd guess I'll see you next week  (:) 
 
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal