Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: Tips for moving from 2 row to larger box?  (Read 4658 times)

0 Members and 1 Guest are viewing this topic.

Gena Crisman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1108
  • 🇬🇧
Re: Tips for moving from 2 row to larger box?
« Reply #20 on: July 06, 2019, 05:24:53 AM »

Gena -- your music theory knowledge and understanding far eclipses mine!

Well, I don't know about that - I just have a feeling of what I would have a go at with the scraps of existing knowledge, repertoire & ideas I have. 2.x row layouts can be very unique to the individual in question. I talked to the poster just above, Steve Freereeder, a bit about 3 voice instruments a while back; he plays his 3v instrument in the upper octave a lot, and would miss the B6/F#6 and A6/E6 buttons which can presumably be found at the knee end of your instrument, where my inclination is, even with the 3rd voice, to shift those off of the instrument. The set up of your loffet pro, then, is perhaps towards the inclination of using the upper octaves quite productively, perhaps hence the high & higher F, and hence these high scale notes, etc. But, any thoughts on my part are always going to be through the lens of my rather limited experience, so, best to take with a pinch of salt and experiment! I after all am a 2r8b adherent.

It gets very hard to know what the 'more correct' choices for oneself are when you add both basses and additional melody notes at the same time. One thing to consider is that you do have treble end stops for each voice. Presumably the instrument is set up as LMM? You could start off by switching on only the L reed for a while and and try playing at higher end - perhaps you will find your Fs will all feel like they're in the right octaves. If that's the case, surely an interesting life can be found playing at that end of the instrument.

I decided to check into the Loffet Pro, and on Bernard's dia.to webpage a 'standard' suggested layout was offered; https://diato.org/pdf/2+6r12b.pdf - although this is a (I think) fixed doh GC diagram, with a bit of mental transposition it seems like your chin end notes are configured in the same manner as prescribed here, as would be some of your half row notes (high and higher F would line up with Sib in this diagram), so, perhaps it simply follows this scheme? That reference layout would however suggest your extra basses may not be A/G reversals, but the outside pair being Eb/F# and the inside pair being Bb/F. If that is the case, it changes things a bit.

If this diagram does represent the layout chosen for your instrument, I'd guess that your half row is:

Bb4/G#4   E5/D5   D#5/F5   Bb5/G#5   E6/D6   D#6/F6
with chin end notes B3/C4 and D#4/B3

So, definitely investigate some E harmonic minor, you should definitely have melody vocabulary for A major and, provided you go up the keyboard, upper octave A minor and C, and the option of even leaning into upper octave F major. If you do have Eb and Bb chords, these help playing for Gm and Dm, so, any tunes that modulate from major to minor of the same key (eg D major <-> D minor) would work very well, eg Por Una Cabeza in D pretty much only works if you can sell a Bb chord.

Hopefully that gives you some ideas of where to start experimenting.
Logged

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11154
  • Wirral UK
    • Chris Ryall
Re: Tips for moving from 2 row to larger box?
« Reply #21 on: July 06, 2019, 02:19:30 PM »

I did this journey 20 years back. My tips

o consder 2 voices rather than 3, it saves a lot of weight. That might be close
   tremello MM or bandonèon LM voicing. I prefer the latter. Rt switches for single
   voice are a boon if you do soulful slow tunes, or sing with your box

o Be aware that most 3 row play is on the pull. You should aim for as "chromatic"
   a right pull layout as possible. When compromising, the accs notes to have on "push"
   are the mist alien to your main ries. That's Ab on a DG. Also consider whether you
   (as style) prefer flattening notes =>blues, or sharpening (rise a key, or a 5th)

o Have a system, standard French is a good one. I ended up with C#DG, with my
   accidentals on the outside (it's brilliant!) Any system must have DE reversal
   if you are on DG basis, or GA on a GC.  Reason: Nearly all your tunes will be in main
   row modes and that reversed D allows fluid run through of melody on the pull. It also
   truly opens up right hand chording, arpeggio vatiations etc.

   If you can tollerate Club layout, you get a free D reversal on main row and can use that
   slot for an extra accidental. Dutch inversion flips BOTH notes on the inner main row and
   is technically even stronger (le Tron uses this) but has you re-learning EVERY tune you
    ever knew  :(

o Your main rows should be in the keys of your local sesssions 😉

o Expanding left end is equally liberating!  I had enormous fun with a 12 bass (10 chords)
   but the ultimate is 18 bass, with the extra 6 as bass inversions. You get ALL bases both
   ways and it truly frees wht you do. Reason: the bass dominates harmony, or how we
   "hear" a melody line, its mode. A short experiment with known tunes versus alternate
   drones will convince. But the converse is that if a line is awkward on pull v the chord …
   play it on push v the bass. No one ever notices the fakery! 

o 12 or 18 bass = no 3rds. You don't need them as a major or minor 3rd can always be
   "bobbed in" with a spare finger on rt end on 3 rows. And a heavy left end can be truly
    hard work! My 18 bass 3 row van der Aa is under 5 kg, I can lift it on one finger  ;D

edit

18 bass is Pignol/Milleret or Grenable layout. Most big makers eg Casta offer this. Beware! Grenoble
right end layout is VERY non standard, but their 18 bass works with anything

Don't forget a good, easy air hole! It's increasingly important,  as you move toward expressing music "mostly on the pull".
« Last Edit: July 06, 2019, 02:31:18 PM by Chris Ryall »
Logged
  _       _    _      _ 

george garside

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5401
Re: Tips for moving from 2 row to larger box?
« Reply #22 on: July 06, 2019, 08:15:33 PM »

perhaps the notion of moving ''to'' a larger box is somehow making it unnecessarily daunting.  The notion of simply "adding'' a larger box to ones existing smaller one imay well be psychologicaly less daunting.

for what its worth I started a long time ago with a hohner 2 row semitone box  , then got one a bit bigger but with 3 rows, then added a 4th aprt box, then a much larger i.e. 96 bass 3 row then belatedly a one row 4 stopper.  Adding the additional boxes was never a problem in any way, probably because nobody mentioned that it might be   so I had no reason to think it would be.    I still have all those different boxes  and play them fairly regularly --the boxes won't worry if you don't

george
Logged
author of DG tutor book "DG Melodeon a Crash Course for Beginners".

Mike Hirst

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1433
  • Black Dot B/C, Bastardo C#/D, Corona II GCF
Re: Tips for moving from 2 row to larger box?
« Reply #23 on: July 07, 2019, 12:22:30 AM »

Be aware that most 3 row play is on the pull

This is absolutely the most important thing.

c.1988 I made the shift from one row to thee row. I was shocked to find that almost all of my one row repertoire sounded weak or awkward on the new instrument. I started poking around and found some nice harmonies using different, but untutored bass RH/LH chord combos. I probably could do it all a lot faster now, but without theory and understanding it was all suck-and-see.

Something I learned early on was that if I found cool RH triumvirate there was probably an equally good chord, melody option on the opposite direction.

The moment I truly got to grips with the larger instrument was when Flaco Jiminez showed me how to run chromatic scales on the GCF three row. From this I learned to play scales using thirds sixths and octaves, almost exclusively on the pull.
« Last Edit: July 07, 2019, 12:28:54 AM by Mike Hirst »
Logged
Semper idem, sed non eodem modo

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11154
  • Wirral UK
    • Chris Ryall
Re: Tips for moving from 2 row to larger box?
« Reply #24 on: July 07, 2019, 09:49:06 AM »

Sorry if my advice was too btoad brush, but it has reflected my own journey. While it is possible to play 3 rows as three one-Rows strapped together, you need a fairly mighty left shoulder, and I'd say better to carry several 2-rows. My own compromise was a D/G and a C/F.  Others might include a Bb/Eb in there? As ever it depends who you play with, ans what you play

A move to 3 rows is essentially a move away from diatonic, and toward tonal or chromatic play. eg I most commonly play my C#DG in G, D, the two Em scales, A major and minor. Yesterday (Gooik festival)  I was also jamming n Bb with a clarinetist, we had a klesmer in Cm (with an Ab 8)) and I was singing in Bb C and Gm.  There was blues in Em, Dm Am Gm and Bb. It's a quite different way of playing.

Most of my stuff in mixed swing sessions is frankly chord/arpegio baesd. Tune can be a challenge, once off piste, though you can learn stuff up, eg I love  Unicorms in Cminor/major The chords … just lie there  ;D All Nic Jones clever songs have opened up for me … they are basically mixed sus and extended chords, albeit with genius timing.

So "direction" is another thing to consider. I do now do fesivals with a single box. Once that was three!

Half rows? Well Andy Cutting yesterday was still on a 2½ Mory, but most of his stuff was on main rows, beautifully played as ever. I note his "New" Pariselle self build has a 6th acc button!

I'd advise against 2½ rows. The cost, and more importantly weight of a full third row is only marginal, and in the repertoire I play … I do use every one of my 10/11/12 buttons. OK, some more than others.

LM bandonèon voicing is great for that incidentally, with a fairly even tone quality over 3 octaves. I think the 2 reeds sounding stabilise each other?  Anyway, much more stable than MM

Another tip is to stick with 4th button start for a DG basis. CG … less critical.

Sorry to go on, but third row, 12 or 18 bass is a big investment, often a bit of a step in the dark. Better to get it right? I'm happy to lend my F#GC to somone seriously exploring, but … mine is a rather eccentric system, again a relic of  my own journey.
« Last Edit: July 07, 2019, 09:58:37 AM by Chris Ryall »
Logged
  _       _    _      _ 

Scallyanglo

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 106
  • Baffetti/Oakwood Binci Pariselle 2.6 LM 14 bass
Re: Tips for moving from 2 row to larger box?
« Reply #25 on: July 17, 2019, 10:11:18 PM »

I've enjoyed reading this thread; thank you everyone who contributed. From having a small LOUD 2-row Baffetti, I've just built a 2.6 row DG LM Pariselle, (what an amazing experience!) and I now have some idea how to get started playing it. The adventure begins.
Logged

playandteach

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3526
  • Currently a music teacher in a high school.
Re: Tips for moving from 2 row to larger box?
« Reply #26 on: July 18, 2019, 11:56:40 PM »

I've enjoyed reading this thread; thank you everyone who contributed. From having a small LOUD 2-row Baffetti, I've just built a 2.6 row DG LM Pariselle, (what an amazing experience!) and I now have some idea how to get started playing it. The adventure begins.
Can we hear it?
Logged
Serafini R2D2 GC, Serafini GC accs 18 bass
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal