Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: 4-stop bass buttons repair  (Read 2737 times)

0 Members and 1 Guest are viewing this topic.

mselic

  • Hero Member
  • *****
  • Online Online
  • Posts: 1683
4-stop bass buttons repair
« on: July 06, 2019, 05:52:45 AM »

The bass buttons on my 4-stop bass box have fallen off - they screw onto a protruding threaded rod (actually just a screw) and the button mounts are stripped. I have a gig today and am looking for a temporary fix, and was considering using either silicone or some general purpose glue on the threads to get them back on and have them stay on. I want to make sure I can still get them off at some point, so I’m wondering if anyone has any suggestions. Thanks.

Also, where can I order new 4-stop bass buttons?
Logged
C#/D player

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
« Last Edit: July 06, 2019, 08:28:38 AM by Tone Dumb Greg »
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

John MacKenzie (Cugiok)

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2360
  • Fettling... Learning to reed and right.
Re: 4-stop bass buttons repair
« Reply #2 on: July 06, 2019, 09:15:46 AM »

You could fill the old hole in the button with a mixture of superglue and baking soda (Look on YouTube), then redrill the hole to the right size.


SJ
Logged
There is no beginning to my talent :)



: Hohner Club Modell 1. Bb/Eb, de-clubbed : Early Hohner Pressed Wood A/D : 1930's Varnished wood G/C:  Hohner Erika C/F: Bandoneon tuned D/G Pressed wood: Koch F/Bb; G/C Pre Corso

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: 4-stop bass buttons repair
« Reply #3 on: July 06, 2019, 10:53:11 AM »

The stop pull handles? All of them fallen off?
Charlie Marshall supplies replacements.
I suspect that small wooden cabinet door handles from a hardware shop/DIY store might do the business as a temporary replacement.

Or just take a pair of pliers with you and wrap insulation tape round the screwed end of the stop-rod (to avoid taking someones eye out).
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: 4-stop bass buttons repair
« Reply #4 on: July 06, 2019, 11:03:55 AM »

He's talking about the bass buttons not the stop knobs.

Gorilla glue works well as it expands in the hole.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: 4-stop bass buttons repair
« Reply #5 on: July 06, 2019, 11:13:14 AM »

Although the heavy and no doubt expensive advertising campaign for Gorilla Glue (which obviously must put up the price) annoys me no end.......which actual Gorilla Glue are you recommending here, Rees? Someone else also recommended it to me, for gluing two pieces of wood with slightly mismatched uneven surfaces, together for the self-same (expanding to fill the gaps) reason.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Mike Hirst

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1433
  • Black Dot B/C, Bastardo C#/D, Corona II GCF
Re: 4-stop bass buttons repair
« Reply #6 on: July 06, 2019, 11:31:57 AM »

A word of caution here. I suspect this is not applicable in the context of the OP, but may be useful for others with a similar complaint.

Some years back I lost the air button from my one row. A finger tip search of the stage after the gig managed to retrieve both the button and the missing screw. I returned home and decided to make the repair before going to bed. I squeezed a blob of glue in to the hole and watched the hard plastic shaft turn to what can only be described as cottage cheese - soft lumpy curds surrounded by a thin milky liquid.

What had started as a small job resulted in a major rebuild of the growl box. The resulting repair has lasted well through the past five or six years. I now have an air button constructed using a piece of dowel a felt furniture pad and a button from an old pair of overalls.
« Last Edit: July 06, 2019, 11:33:53 AM by Mike Hirst »
Logged
Semper idem, sed non eodem modo

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: 4-stop bass buttons repair
« Reply #7 on: July 06, 2019, 11:55:59 AM »

If the Gorilla glue is the expanding PU stuff, it will do for a temporary repair, but structurally it won't last.
The foaming action shouldn't be taken to mean it's gap filling. It's a wonderfully strong and very permanent adhesive if it is fixing a well made close joint.  If it's a gappy joint, it will be as strong as a Crunchie bar.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: 4-stop bass buttons repair
« Reply #8 on: July 06, 2019, 02:43:11 PM »

Thanks, Squeaky. It's actually 2 pieces of 6mm x 17mm which I'm gluing together to make a piece which is 12mm x 17mm, but I cannot get the two surfaces to match exactly. It doesn't need to carry any load, but it does need to be an airtight bond between the two.
I'll see how much this stuff is, and if it's not too dear I'll maybe have a go!
What's it actually called?
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

mselic

  • Hero Member
  • *****
  • Online Online
  • Posts: 1683
Re: 4-stop bass buttons repair
« Reply #9 on: July 06, 2019, 02:46:32 PM »

http://www.cgmmusical.co.uk/CGM_Musical_Services/Treble_Bass_Buttons.html

Superglue?

The kind of bass buttons I’m talking about aren’t available on this page. The ones I need are designed for the bass box on a 4-stop - they have a long stem which threads onto a screw.
Logged
C#/D player

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: 4-stop bass buttons repair
« Reply #10 on: July 06, 2019, 03:39:27 PM »

Quote
Also, where can I order new 4-stop bass buttons?

Not sure you will find them advertised as such.  I think many Cajun boxes use 1/2" hole plugs.

http://www.leevalley.com/en/hardware/page.aspx?p=46598&cat=41306,41316&ap=1

http://www.cgmmusical.co.uk/CGM_Musical_Services/Treble_Bass_Buttons.html#31
Logged

mselic

  • Hero Member
  • *****
  • Online Online
  • Posts: 1683
Re: 4-stop bass buttons repair
« Reply #11 on: July 06, 2019, 04:02:58 PM »

I only have a few hours until gig-time. Can anyone see any issue with using a bit of fast-setting wood glue on the threads as just as a temporary measure to keep them in place? The buttons will sit in place as they are but I’m concerned that without some kind of temporary adhesive they will work themselves off while playing, and potentially drop off the stage and gone forever...

...and yes, I realize wood glue is not intended for metal and plastic, but it might just create enough of a hold for the time being and still allow me to take them off afterwards.
Logged
C#/D player

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: 4-stop bass buttons repair
« Reply #12 on: July 06, 2019, 05:40:54 PM »

Super glue. It's the only thing you can trust through a gig.
You can struggle tomorrow with a proper repair.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

mselic

  • Hero Member
  • *****
  • Online Online
  • Posts: 1683
Re: 4-stop bass buttons repair
« Reply #13 on: July 06, 2019, 05:43:12 PM »

My long-term fix will be creating new ‘stems’ with wooden dowels, screwing the existing buttons (if I can get them off the plastic) into the dowel on one end and screwing the other end into the threaded rods which protrude from the internal bass flappers.
Logged
C#/D player

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: 4-stop bass buttons repair
« Reply #14 on: July 07, 2019, 07:44:58 PM »

How did it go?
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

george garside

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5401
Re: 4-stop bass buttons repair
« Reply #15 on: July 07, 2019, 07:59:46 PM »

He's talking about the bass buttons not the stop knobs.

Gorilla glue works well as it expands in the hole.

seconded!  I have used it for hanging considerable weights  onto garage joists where original screws have lost their grip  . It expands to ?20 times  the amount you put in and both fills uneven orifices  and grips anything inserted into the hole eg screws, rods or whatever. Very lightly spraying the thread with silicone 'oil' makes subsequent removal easy

george
Logged
author of DG tutor book "DG Melodeon a Crash Course for Beginners".

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: 4-stop bass buttons repair
« Reply #16 on: July 08, 2019, 02:53:29 AM »

He's talking about the bass buttons not the stop knobs.

Gorilla glue works well as it expands in the hole.

seconded!  I have used it for hanging considerable weights  onto garage joists where original screws have lost their grip  . It expands to ?20 times  the amount you put in and both fills uneven orifices  and grips anything inserted into the hole eg screws, rods or whatever. Very lightly spraying the thread with silicone 'oil' makes subsequent removal easy

george

might work but not really what this glue is meant for ( instructions will say pieces must fit tightly), there are many good structural epoxys that will fill voids and bond materials better than gorilla glue.
I ‘d find a good plastic epoxy for the repair, fill and re drill .
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

mselic

  • Hero Member
  • *****
  • Online Online
  • Posts: 1683
Re: 4-stop bass buttons repair
« Reply #17 on: July 08, 2019, 05:13:06 AM »

I used a fast-drying wood glue and all was well for the gig - the buttons are still good today. I don’t expect it to last, but it was only meant as a temporary fix anyway.

One issue seems to be that the screws that come up through the internal bass pad/pallets are quite short and don’t have much purchase on the button stems anyway. I’m inclined to replace them, but I imagine removing these screws from within the box bass assembly might be tricky...
Logged
C#/D player

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: 4-stop bass buttons repair
« Reply #18 on: July 08, 2019, 09:11:49 AM »

Can you do some photos?
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal