Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: How to bend pallet Lever arm on HA-2814, HA-2915, Pokerwork, 2-Row?  (Read 2141 times)

0 Members and 1 Guest are viewing this topic.

AlexCJones

  • Good talker
  • **
  • Offline Offline
  • Posts: 89
  • 3 row Hohner GCF 16 Bass

I have read a bunch of posts about the bending needed to restore the button height after resurfacing the pallets with thick material, but I still am not sure exactly how to do that.  (I have not yet started resurfacing the pallets, but the material I have is 2.5-3mm thick, and will certainly make the buttons low enough that I will need to do the bending to restore their height.)

From some posts, it seems like the arm going from the button to the fulcrum rod is what is to be bent, but from others, it seems like it is the portion from the fulcrum rod to the pallet.  So, at what point should the bending be done?  It other words, is it the short part of the "L" or the long part?  And what part of the short or long part?

Does anyone have any instructions with a photo showing the best way to do the bending part?  I looked on YouTube for a video, and even with "accordion" in the search, but the results are videos for bending all kinds of non-musical machine parts, but not accordion levers.  Would anyone know of a video that exists, that I just have not found yet?

Thanks.


Logged

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: How to bend pallet Lever arm on HA-2814, HA-2915, Pokerwork, 2-Row?
« Reply #1 on: July 08, 2019, 02:37:29 AM »

The bending happens on the button side of the arm,

Watch this guy (  I think he’s some kind of MD ) about fourteen minutes in or watch the whole thing as it applies.
https://m.youtube.com/watch?feature=youtu.be&v=g7nVDIXF3qc
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: How to bend pallet Lever arm on HA-2814, HA-2915, Pokerwork, 2-Row?
« Reply #2 on: July 08, 2019, 08:04:37 AM »

Watch this guy (  I think he’s some kind of MD ) about fourteen minutes in or watch the whole thing as it applies.
https://m.youtube.com/watch?feature=youtu.be&v=g7nVDIXF3qc


He's good, who is he?

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: How to bend pallet Lever arm on HA-2814, HA-2915, Pokerwork, 2-Row?
« Reply #3 on: July 08, 2019, 09:19:23 AM »

Don't assume automatically that you are going to have to do a lot of work. If the old pallets have been removed without bending the arms, not much will change. I only had to bend 3 or 4 on my club III B S and I had to take the whole mechanism out to get the pallets off to start with.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: How to bend pallet Lever arm on HA-2814, HA-2915, Pokerwork, 2-Row?
« Reply #4 on: July 08, 2019, 09:33:47 AM »

Surely, by just bending the button end of any linkage, that would leave the pallet sitting at an angle on the soundboard/fondo thingy, begging air to leak past?
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: How to bend pallet Lever arm on HA-2814, HA-2915, Pokerwork, 2-Row?
« Reply #5 on: July 08, 2019, 09:40:06 AM »

If you watch my video (above) I recommend adjusting the button height and checking button alignment prior to hot glueing the pallets in place

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: How to bend pallet Lever arm on HA-2814, HA-2915, Pokerwork, 2-Row?
« Reply #6 on: July 08, 2019, 10:10:38 AM »

As Lester says, get everything lined up and in the right place before applying the glue.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: How to bend pallet Lever arm on HA-2814, HA-2915, Pokerwork, 2-Row?
« Reply #7 on: July 08, 2019, 11:43:16 AM »

Surely, by just bending the button end of any linkage, that would leave the pallet sitting at an angle on the soundboard/fondo thingy, begging air to leak past?
It doesn't though. When the pallets (with new facing) are in position over the fondo vents, and with the lever arms bent slightly to restore the previous button height, the lever arms then slot into place into the pallets at a fractionally different angle than previously. That new angle is then preserved when you glue the lever arms on to the pallets. Watch Lester's video - it is spot on.

If you have only refaced 1-row 4-stop pallets, they are longer and therefore slightly more tricky to get a flat, flush seal all along the length of the pallet. Hence the potential for air leaks is greater. But if you follow Lester's method you should be OK.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

AlexCJones

  • Good talker
  • **
  • Offline Offline
  • Posts: 89
  • 3 row Hohner GCF 16 Bass
Re: How to bend pallet Lever arm on HA-2814, HA-2915, Pokerwork, 2-Row?
« Reply #8 on: July 09, 2019, 03:12:37 AM »

Thanks Mr. Bailey or Dr. Bailey!

This video is EXACTLY what I need!  It also answers the questions I would have needed to ask later, too.  It also takes the fear out of it.

Hey everyone! 

He has made a whole SERIES of videos called "Hot Rod a Hohner"!  This video above is #2 in the series and #3 is restricting the treble action.  There is also one for resurfacing the bass pallets and one for retaping the bellows too.  Just go to YouTube and enter "Hot Rod a Hohner" in the YouTube search field.

Thanks again!  This video series is brilliant!
Logged

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: How to bend pallet Lever arm on HA-2814, HA-2915, Pokerwork, 2-Row?
« Reply #9 on: July 09, 2019, 09:11:27 AM »

Thanks Mr. Bailey or Dr. Bailey!

Hey everyone! 

He has made a whole SERIES of videos called "Hot Rod a Hohner"!

New readers start here (it's as good a place as any)

http://forum.melodeon.net/index.php/topic,23627.msg281500.html#msg281500

Would it be feasible to include a link to Lester's Hot Rod on the Home page?
« Last Edit: July 09, 2019, 10:56:16 AM by Tone Dumb Greg »
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal