Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Bass / left end weight and removing the 'third' reeds  (Read 1472 times)

0 Members and 1 Guest are viewing this topic.

Schnorbitz

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 199
Bass / left end weight and removing the 'third' reeds
« on: July 25, 2019, 07:40:14 AM »

This is a theoretical question, but one that I haven't managed to find whilst searching through the forum. On all my boxes I never play with thirds in. I like 'forking / crossing' chords so thirds are not for me. I was thinking about left hand / bass end weight the other day. With a lighter box you can tape the thirds off no problem. The left end is light anyway. However, on a bigger box (I have a Handry 12 which I love but at some point will in the future look to an 18 bass box which will lead to more weight on the left), is there any weight advantage to removing the third reeds completely (this may be at the time of production or even post production). Or in reality is the weight difference negligible?

Looking forward to the responses from the collective box related knowledge on this forum.
Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Bass / left end weight and removing the 'third' reeds
« Reply #1 on: July 25, 2019, 08:05:20 AM »

If this is any help....I've just weighed 9 chord sized reed plates at .12 kgs or near enough 4 oz.
Mind you, they're zinc plates which will be heavier than aluminium ones. I wouldn't have thought that such a weight would be noticeable while pumping bellows sideways, but I don't suppose we can tell until someone actually tries it!
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Schnorbitz

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 199
Re: Bass / left end weight and removing the 'third' reeds
« Reply #2 on: July 25, 2019, 08:27:14 AM »

That is interesting Winston. Yes, I suspect most of the weight is in the size of the cabinet with a bigger box.
Logged

pete /acorn

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 930
  • .Cast Trilly
    • Acorn Instruments
Re: Bass / left end weight and removing the 'third' reeds
« Reply #3 on: July 25, 2019, 08:40:40 AM »

Hi
I don't know where you are based but I have Handry 18s in stock in DG acc and GC acc.
You arre welcome to try them if you wish,I will also be at Whitby Festival and they will be with me ,

Other events on web site

Pete
Logged
Acorn Instruments are specialist retailers of Castagnari Instruments,and have an extensive stock of new instruments on the shelf for prompt delivery in standard layouts however these can easily be changed to customers special requirements,we have over 600 reeds in stock
 We also have the largest stock in the UK of  pre loved melodons all fully serviced,and with 12 months warranty
UK and international customers catered for
www.acorninstruments.co.uk

Mike Hirst

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1433
  • Black Dot B/C, Bastardo C#/D, Corona II GCF
Re: Bass / left end weight and removing the 'third' reeds
« Reply #4 on: July 25, 2019, 09:45:28 AM »

It is common practice for Norteno, Tejano and Conjunto players to remove the bass blocks completely. I tried this with a Corona II. The instrument was super responsive and extremely fast, with the added advantage that any of the bass buttons could be used to scoop huge amounts of air. I would certainly recommend it for anyone playing in a band, where bass, drums and guitar make the left hand redundant.
Logged
Semper idem, sed non eodem modo

Gena Crisman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1108
  • 🇬🇧
Re: Bass / left end weight and removing the 'third' reeds
« Reply #5 on: July 25, 2019, 11:01:18 AM »

I think if you're certain about going thirdless, you're best served by either a) swapping the reed plates for duplicate tonics/fifths so what's there is at least being used or b) playing a box designed not to have thirds to begin with. The weight saving would be in the smaller mechanisms, reed blocks etc all adding up, rather than just the reed plates themselves. Or, you could use all the extra space to have more chords.
Logged

Schnorbitz

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 199
Re: Bass / left end weight and removing the 'third' reeds
« Reply #6 on: July 25, 2019, 11:19:08 AM »

Quote
I don't know where you are based but I have Handry 18s in stock in DG acc and GC acc.
You arre welcome to try them if you wish,I will also be at Whitby Festival and they will be with me

Pete, I would love to. But where I live down in the South West, it would be quicker to go to France............if I am coming up your way I will give you a shout though.
Logged

Schnorbitz

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 199
Re: Bass / left end weight and removing the 'third' reeds
« Reply #7 on: July 25, 2019, 11:20:59 AM »

Quote
It is common practice for Norteno, Tejano and Conjunto players to remove the bass blocks completely. I tried this with a Corona II. The instrument was super responsive and extremely fast, with the added advantage that any of the bass buttons could be used to scoop huge amounts of air. I would certainly recommend it for anyone playing in a band, where bass, drums and guitar make the left hand redundant.

Mike, interesting. It would make sense if the left hand was not being used. Always fascinating to see the 'hacks' that are employed to make the instrument work for different styles.
Logged

Schnorbitz

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 199
Re: Bass / left end weight and removing the 'third' reeds
« Reply #8 on: July 25, 2019, 11:26:42 AM »

Quote
I think if you're certain about going thirdless, you're best served by either a) swapping the reed plates for duplicate tonics/fifths so what's there is at least being used or b) playing a box designed not to have thirds to begin with. The weight saving would be in the smaller mechanisms, reed blocks etc all adding up, rather than just the reed plates themselves. Or, you could use all the extra space to have more chords

Gena, yes I've never liked thirds so they really are no use to me. There was an interesting thread that I found on the forum that discussed the advantages of replacing the third with another I or V. Not sure if it was agreed on the best setup - as always there were many views. That makes sense but I suppose my initial musing was based on the potential weight saving of removing. I had not got as far as thinking about removing the mechanism and block as well. But that would be logical. It would be interesting to know whether a maker such as Castagnari would entertain this or whether it is even a request that comes up from time to time.
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Bass / left end weight and removing the 'third' reeds
« Reply #9 on: July 25, 2019, 12:19:05 PM »

I think whatever you decide to do, you should make it reversible, i.e. if you are going to remove reeds and/or reed blocks, keep them somewhere safe so that when the time comes to sell the box on to someone else it can be put back into its original state.

You may think this doesn't matter because you will never have any intention of selling it, but that is not the life experience of many players, on this forum or elsewhere. The chances are that you will want to sell it on at some point, and it will much more saleable in its original state.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Schnorbitz

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 199
Re: Bass / left end weight and removing the 'third' reeds
« Reply #10 on: July 25, 2019, 12:24:17 PM »

Steve, yes, that is a very good point. 'Custom' instruments are always perfect until you want to move them on.
Logged

David Colpitts

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 116
Re: Bass / left end weight and removing the 'third' reeds
« Reply #11 on: July 25, 2019, 04:48:28 PM »

It is common practice for Norteno, Tejano and Conjunto players to remove the bass blocks completely. I tried this with a Corona II. The instrument was super responsive and extremely fast, with the added advantage that any of the bass buttons could be used to scoop huge amounts of air. I would certainly recommend it for anyone playing in a band, where bass, drums and guitar make the left hand redundant.

Hello!  The total (reversible, of course) removal of Corona reed blocks struck a nerve, in a good way.  I never use the left, and my soon-to-be-picked-up Corona will be heavy enough, as is my Baldoni D/C#.
Any idea what the Corona bass blocks might weigh?

Thanks, and regards,

David
Logged

Baron Collins-Hill

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 232
  • Maine, USA
Re: Bass / left end weight and removing the 'third' reeds
« Reply #12 on: July 25, 2019, 05:17:10 PM »

I took the entire reed block that housed the thirds on my Castagnari Big 18 out. It weighs almost nothing and it makes almost no difference to the overall weight of the left hand of the box. I'd imagine that it would be even less noticeable on a larger box like a Handry 18 where the cabinet itself is larger and there are more reeds because of the low bass.

That said, I left the 3rds block out because I never want to hear them.

Thanks,
Baron
Logged
D/G/Acc Castagnari Big 18 (full Dutch reversals)
Mandolin & Tenor Guitarist: Velocipede
Free Online Mandolin Lessons: MandoLessons

Schnorbitz

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 199
Re: Bass / left end weight and removing the 'third' reeds
« Reply #13 on: July 25, 2019, 06:15:07 PM »

Quote
I took the entire reed block that housed the thirds on my Castagnari Big 18 out. It weighs almost nothing and it makes almost no difference to the overall weight of the left hand of the box.

Baron, thanks. That is really useful and probably a definitive answer. It seems if you want lighter then you need to go down the line of physically smaller box such as a Benny, Evo etc. So much for my theory!
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal