Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: That explains why a reed was silent  (Read 1068 times)

0 Members and 1 Guest are viewing this topic.

Gareth Sprack

  • Member
  • *
  • Offline Offline
  • Posts: 22
That explains why a reed was silent
« on: July 26, 2019, 02:19:38 PM »

I had just repaired a spoon bass (split and safety pins) on my 114C and was feeling on bit of a roll, so I thought I would try and discover why I had two silent reeds.
Girding up all my loins, I started pulling out the pins
Taking the box apart wasn't as difficult as I had imagined and I was soon gazing for the first time on the inner workings.
I didn't take very long to notice there was an entire reed block missing, which explained the silence, what I couldn't explain was where the block had gone to, the rest of the instrument was empty.
Eventually I found it, well hidden between the bellows folds, but that is as far as I am going to take it, time to start saving for a professional fettle.
Sadly my local man Alan has been far from well and I wish him a speedy recovery, regardless.
The other silent reed seems to have responded to tickling with a paint brush, so thats a bonus.
A photo of the vacant space, which I thought I would share.

Gareth
« Last Edit: July 26, 2019, 02:44:49 PM by Gareth Sprack »
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: That explains why a reed was silent
« Reply #1 on: July 26, 2019, 02:31:27 PM »

<pedant> It was a reed PLATE that had come off, the reed BLOCK is the part to which the plates are waxed.</pedant>



Gareth Sprack

  • Member
  • *
  • Offline Offline
  • Posts: 22
Re: That explains why a reed was silent
« Reply #2 on: July 26, 2019, 02:42:27 PM »

Thank you Lester, pedantry is acceptable when informing the ignorant.
It also makes more sense!
I have just noticed one side of the plate is stamped with a T, but as the German for Top is oben, it can't mean that.

Gareth
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: That explains why a reed was silent
« Reply #3 on: July 26, 2019, 03:13:11 PM »

Don't know what the T stands for but when the reed is fitted you should be able to read it, stops the reed being fitted the wrong way round.


You can probably refit yourself if you are brave, carefully refit the reed in the existing wax and then heat a pointy thing up to reflow the wax where you can reach it. Be careful not to get near the valves with the hot pointy thing as they tend to melt and shrivel.

Gareth Sprack

  • Member
  • *
  • Offline Offline
  • Posts: 22
Re: That explains why a reed was silent
« Reply #4 on: July 26, 2019, 04:35:04 PM »

I am not sure, but compared to the other reed plates there didn't seem to be as much wax on that one as the others, so perhaps they were a bit mean and thats why it fell off.
Job for the autumn I think.
Logged

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: That explains why a reed was silent
« Reply #5 on: July 26, 2019, 09:32:52 PM »


...Eventually I found it, well hidden between the bellows folds, but that is as far as I am going to take it, time to start saving for a professional fettle...
Gareth

I agree with what Lester said. Get a pointy hot thing (aka soldeing iron) and have a go at doing it yourself.
Place the reed in position. Apply the iron for very short periods and it will work.
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: That explains why a reed was silent
« Reply #6 on: July 26, 2019, 09:36:14 PM »

On the other hand if a reed has dropped out it’s a sign that the wax is nearing the end of its useful life, and in the long term you will need to find someone to remove all the old wax and fix the reeds with some nice fresh wax.  You’ll then have a box you can rely on for many years.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal