Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2 3 4   Go Down

Author Topic: Idle thoughs on diatonic button lay out  (Read 6553 times)

0 Members and 1 Guest are viewing this topic.

David Summers

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 159
Idle thoughs on diatonic button lay out
« on: July 27, 2019, 12:44:47 PM »

First off, I'm not having a go on the layout of buttons on a melodeon, but am just wondering if other layouts are possible. If you look at a single daitonic row it goes:

Push: 3513513513
Pull: 6724672467

So has we have 3 notes repeating on the push, but 4 on the pull, the notes on push and pull move possition between octaves. Practically this means learning a new layout for each octave.

Now with 7 notes to each diatonic key, this doesn't split evenly between the push and the pull. But could do something like:

Push: 5713571357
Pull: 4612461246

So the tonic is on both the push and pull - but the other notes lie the same on both octaves. Now this misses a few notes at the top end due to the doubled tonic.

So just wondering why the current diatonic layout of keys was done; do any of the experts have a view?
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Idle thoughs on diatonic button lay out
« Reply #1 on: July 27, 2019, 01:50:06 PM »

Yes, it was done to make it easy to play!
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Sebastian

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1056
Re: Idle thoughs on diatonic button lay out
« Reply #2 on: July 27, 2019, 02:46:23 PM »

Not an expert, but maybe you want to try to play a harmonica. That’s where the layout comes from, and it’s easy to see why it makes sense. Though there exist many different custom layouts on the harmonica, the standard layout is without doubt the universally accepted and used one. You may want to take a look at the so called solo-tuning, where every octave has the same note layout.

Your proposal to have the 7 on the push is maybe not an optimal arrangement, because you need the 7 to go with the pull chord.

There are modifications to the standard layout. One of its shortcomings is, that you don’t have the 5 on the pull in the two melody-octaves. This was remedied by the Club layout (but this came, of course, at a cost).
Logged

David Summers

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 159
Re: Idle thoughs on diatonic button lay out
« Reply #3 on: July 27, 2019, 03:16:33 PM »

Interesting though on chords, lets see what triads works:

Major: 135 461 572 - only 135 can be done on standard layout
Minor: 246 357 613 - only 246 can be done on standard layout
Diminished: 724 - so can be played on standard layout

So actually many chords can't be done. Hmmm wonder if there is a layout that works better?
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Idle thoughs on diatonic button lay out
« Reply #4 on: July 27, 2019, 03:37:15 PM »

On a 1 row bass you have either 2 chords (4 stop) or 3 chords. These match the treble end easily ie (assuming a G 1 row 4 bass)

All push notes will be supported by the push G bass/chord
Half the pull notes (A & F#) are supported by the D bass/chord
Half the pull notes (C & E) are supported by the C bass/chord  (or slightly less well by the D bass/chord if it's a 4 stop)

Your system would possibly need a G pull chord for the pull tonics and a push D chord for the push F#.

richard.fleming

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 556
Re: Idle thoughs on diatonic button lay out
« Reply #5 on: July 27, 2019, 07:45:36 PM »

Invent your own system, install it in a box, and no-one else will be able to play it, you won't be able to sell it, and you won't be able to buy another one without a major retuning job. If the systems used at present are so bad no one would be playing them. The limitations of any instrument can also be its strength. Just get on with playing would be my advice.  (:) :||: :|||: :|glug
Logged
Old Paolo Sopranis in C#/D and D/D#

Dick Rees

  • Neo-Luddite
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1640
Re: Idle thoughs on diatonic button lay out
« Reply #6 on: July 27, 2019, 08:11:03 PM »

If wagon wheels were square or triangular you could do without brakes...
Logged
"You're making the wrong mistakes."
...Thelonius Monk

"I never made one of my discoveries through the process of rational thinking."
...Albert Einstein

"If Art Tatum took up classical music seriously, I'd quit my job the next day."
...Vladimir Horowitz

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Idle thoughs on diatonic button lay out
« Reply #7 on: July 27, 2019, 08:51:30 PM »

The concept is an intriguing idea to explore. Nothing wrong with conjecture. Maybe a Roland or a Streb could help.

In DG terms, your layout is what I've attached, if I have got it right.
There are a few things that strike me:
1. The middle octave, in terms of fingering and bellows direction, is a lower octave reflection of the standard upper octave.
2. You lose the F# reversals.
3. You gain a reverse D
4. You lose the lower octave push B

Point 1: This makes the layout very difficult for me because the standard middle octave fingering works a lot better for me than the standard upper octave. It's where I normally play. I find it more intuitive. GC players may say the opposite. For that reason I don't think I could ever learn to love your layout.

Point 2:The loss of the F# is significant. You lose the pull RH tonic D chord on the G row.

Point 3. Definitely a bonus. Pity you don't get an E reversal, though.

Point 4: I use push B a lot when playing in G.

I'm off to consider a modified version using a similar principle.
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Dick Rees

  • Neo-Luddite
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1640
Re: Idle thoughs on diatonic button lay out
« Reply #8 on: July 27, 2019, 09:32:35 PM »

Yes, it was done to make it easy to play!

Exactly!

As to "...learning a new layout for each octave...", there are functionally two octaves.  Beyond that the difference is the same regarding displacement.

Agree with the Streb/Roland avenue for experimental stuff.
« Last Edit: July 27, 2019, 10:52:47 PM by Dick Rees »
Logged
"You're making the wrong mistakes."
...Thelonius Monk

"I never made one of my discoveries through the process of rational thinking."
...Albert Einstein

"If Art Tatum took up classical music seriously, I'd quit my job the next day."
...Vladimir Horowitz

Sebastian

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1056
Re: Idle thoughs on diatonic button lay out
« Reply #9 on: July 27, 2019, 10:43:00 PM »

Maybe a Roland or a Streb could help.
Yes, if you want to explore new layouts a digital melodeon, where you can easily change layouts, will certainly be very useful! That’s one of the reasons, why I from time to time consider to acquire a Streb. (:) But then I remind myself that it would be easier to just play a little standard chromatic accordion which offers all possible notes right away. (Well, not all the notes. I’d love to tinker with microtones sometimes. So I should get a digital chromatic accordion …)

In the end, I stay with the normal layouts.
Logged

playandteach

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3526
  • Currently a music teacher in a high school.
Re: Idle thoughs on diatonic button lay out
« Reply #10 on: July 28, 2019, 12:08:19 AM »

Firstly, I think it's fine to question why things are the way they are, and also to consider tradition v innovation. However, if I played a 1 row I would leave it standard. As soon as you have 2 rows you can either choose standard or a few tweaks. There is, as suggested a list of reasons to leave it standard - buying and selling, playing other people's boxes etc.
I chose to have the Dutch reversal (D/E plate flipped on inside row)- which is easily switched back to standard. It does mean that the two rows don't mimic each other, so it kind of forces you into cross rowing rather than up and down the rows.
I then took the more outlandish step of replicating the D/E switch in higher and lower octaves, which is much less common, harder to reset and needs either replacement reeds or retuning. It also forces you to commit to learning a strange set up.
For me it is a good compromise - allowing me to play longer phrases on the pull, and playing stuff that normally requires a 3rd half row (to put those reversals on).
I wouldn't advise any one else to do it from the outset, but I like it.
Logged
Serafini R2D2 GC, Serafini GC accs 18 bass

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Idle thoughs on diatonic button lay out
« Reply #11 on: July 28, 2019, 12:17:09 AM »

Nothing wrong with playing around with ideas. Bear with me. I'm fully aware that the standard diatonic scale layout has been proven to be effective for well over 150 years.  It does have limitations, though.

What happens if you place the notes so that the bellows for the standard diatonic middle scale stays in the standard  directions, but the lower and upper octaves mirror the middle octave [edit: mirror is the wrong word, but I hope you get my drift, echo might be better]? The first layout shows the skeleton of what I mean.

What I've done is move the push root in the middle octave up one button. This leaves an undefined push note where the root note was. It means octaves are 5 buttons broad, instead of 4, but it leaves spaces available for other notes. Looking at it, I'm pretty sure I could pick it up and play it, though I might tend to run out of fingers.

It leaves a question and a couple of issues though.
The question is what to do with the undefined notes? I have used them to create reversals.
The issue is I like to have a low G scale, so I have made it 4th button start, because I would rather have a full low G scale than a full upper octave scale. A personal proven choice.
I won't address the lack of accidentals yet, but bear in mind that the standard low notes 21 button DG and CF boxes don't have them, anyway and my third box is a 2.4 row. Problem sorted.

There are other issues and it may turn out to be unplayable, but there are a lot of attractive features and I think the basic diatonic scales would be straightforward to play. It is not that far removed from the standard box and most of the reeds just need moving around a bit.

The second attachment shows the developed layout.

[Edit: I've just noticed that I didn't remove Lester's line from the bottom of the layout sheet I cribbed. Please don't do what he says. Sorry Lester]

« Last Edit: July 28, 2019, 09:03:34 AM by Tone Dumb Greg »
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Idle thoughs on diatonic button lay out
« Reply #12 on: July 28, 2019, 12:26:31 AM »


...I chose to have the Dutch reversal (D/E plate flipped on inside row)- which is easily switched back to standard. It does mean that the two rows don't mimic each other, so it kind of forces you into cross rowing rather than up and down the rows....

One of the weaknesses with my layout is that I have D/E push/pull combinations on the D and G rows. wasted button and no pull Ds available. I thought about the reversal, but it is a move away from a standard pattern, as is the single push C that I have included
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Howard Jones

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1203
Re: Idle thoughs on diatonic button lay out
« Reply #13 on: July 28, 2019, 10:34:42 AM »

The idea that the upper octave requires a different fingering may appear strange to someone used to, say, a piano keyboard, but for wind players it is normal to use different fingerings for notes in different octaves and no one gives it much thought. It is simply a question of learning to play through the 'break' so that a scale becomes a single pattern over two octaves rather than one.

A diatonic keyboard is by definition limited.  It is a compromise.  Modifying it to resolve one issue will usually simply throw up a different issue elsewhere.  Modifications which may suit the music you want to play and the style in which you play it may be impossible for someone else with different musical objectives.

David Summers

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 159
Re: Idle thoughs on diatonic button lay out
« Reply #14 on: July 28, 2019, 11:02:39 AM »

As S&G said, "I've nothing to do today but smile" :)

Yes, of course I'm not planning on changing my melodeon, the standard it what it is - and the inertia it brings means changes should not come on a whim. I guess in my defense, I'm still learning the box; and at the moment keep ending up a third out on the pull on the upper octave (e.g. I forget that one the upper octave, the pull is the note bellow the push; the opposite of the lower octave). My issues is of course just a learning phase, and so of no concern. I think though that TDG made the more apt point though "... the standard middle octave fingering works a lot better for me than the standard upper octave. It's where I normally play. I find it more intuitive. " - so I guess this is saying runs on the push and pull are different on the standard layout between upper and lower octave - and that has definite consequences. Is this a general feeling though, that players find playing on one octave, easier than the other?

Its interesting that PandT Has actually gone to a different layout; and actually the club layout also says layout isn't set in stone.

But to me yes it is just idle thoughts on what else could be done. The crux though I guess has to be how playable the boxes are, and thats where TDG, PandT and Lester have a point - its down to what is played, runs and the relationship with the bass notes and chords.

On the latter, Lester has a point - I hadn't noticed before that the chord buttons are set up on the same push/pull as the melody. I guess this is a consequence of how the bass buttons are configured - e.g. these will always mirror the melody side. My feeling this is a secondary consequence to melody layout.

Probably TDG point that two row boxes are different concept - e.g. as soon as you can get reversals on the second diatonic row, you can only consider the layout of both rows together. So any layout that gives a note twice on the same push/pull on different diatonic rows - I guess we can call a wasted button.

And thats maybe a good point, which notes do you want avaible on both push and pull. As the diatonic scale is a key, many tunes are played around the tonic in that key - so probably that note is used most; with probably the fifth second most common (although after the tonic I'd be hard push to say which is used most). So on a DG box, this would suggest have D, G and A available - and actually those are what a standard layout has.

I guess also thats where the traction comes, are songs written in the UK for melodeon usually written for the DG box as the english standard? If so the layout is driving songs? What if songs drove layout - would we get other layouts? I don't know, maybe not ....
« Last Edit: July 28, 2019, 11:11:08 AM by David Summers »
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Idle thoughs on diatonic button lay out
« Reply #15 on: July 28, 2019, 11:43:32 AM »

Have you considered other traditions? Italian, French, Spanish, Swedish, Columbian Vallenato, Cajun, Tex-Mex, Dutch, Irish, Scots, Quebecois, etc. etc.
They all use the same layout (not specifically D/G) but in different ways, so I don't think the layout drives the songs.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Sebastian

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1056
Re: Idle thoughs on diatonic button lay out
« Reply #16 on: July 28, 2019, 12:10:21 PM »

Have you considered other traditions? Italian, French, Spanish, Swedish, Columbian Vallenato, Cajun, Tex-Mex, Dutch, Irish, Scots, Quebecois, etc. etc.
They all use the same layout (not specifically D/G) but in different ways, so I don't think the layout drives the songs.
Many of them use small adjustments or modifications. The Italian organetto is often a one-row with a half row of reversals. The French accordéon diatonique comes often with an extende bass side and plenty of helper buttons. The Basque boxes have more and unisonoric basses, the Tex-Mex often remove the basses entirely, the Dutch boxes have indeed often the s. c. dutch reversal, the Schwyzerörgeli has likewise unisonoric basses, all Alpine boxes have the Gleichton etc.
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Idle thoughs on diatonic button lay out
« Reply #17 on: July 28, 2019, 02:00:23 PM »

I was not talking about the basses!
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

george garside

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5401
Re: Idle thoughs on diatonic button lay out
« Reply #18 on: July 28, 2019, 02:13:59 PM »

no doubt many of us have from time to time contemplated our navels  with a view to 'inventing' a ?better layout with most  experienced players  keeping this in the 'idle thoughts' department'

at the risk of getting shot in the bellows or should I say belows  it seems to me that it is relative newcomers  that want to change  the tried and tested since 1829 diatonic set up rather than simply learning to play it and perhaps most importantly  learning the noble art of faking that which isn't there ? smoke and mirrors!

george ;D :||:
Logged
author of DG tutor book "DG Melodeon a Crash Course for Beginners".

David Summers

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 159
Re: Idle thoughs on diatonic button lay out
« Reply #19 on: July 28, 2019, 02:34:41 PM »

I was not talking about the basses!
:) But you also didn't give the background to your insight. I guess you are keeping this to yourself ;) Thats OK ...
Logged
Pages: [1] 2 3 4   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal