Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Melodica reeds  (Read 4150 times)

0 Members and 1 Guest are viewing this topic.

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Melodica reeds
« on: August 19, 2019, 06:55:37 AM »

I removed the reed plates from a Hohner melodica (to tune them...why Hohner melodicas are so sharp I don’t know..) and noticed how all the reeds have a little upward curl on the end, except the bigger weighted reeds. These are stainless steel and only work in one direction, so no reverse side. You can just see it in the attached picture...but the curl is quite pronounced.

Tiposx

  • Durham in England
  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 259
Re: Melodica reeds
« Reply #1 on: August 19, 2019, 08:44:53 AM »

Could the gaps be there to help drain the inevitable build up of liquid? Dry tuning pun here. ...
I like the idea of a melodica, but they don't sound good to my ears,  perhaps it's just because they are tuned sharp.
Logged

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Melodica reeds
« Reply #2 on: August 19, 2019, 08:50:31 AM »

Yes that might be right. They are easy to tune once you get the plate off and lay it flat on your tuning table. But they have a very pure sound which I quite like. I’m interested really in finding out if the little curl affects the sound. The responsiveness of my Hohner is superb. It has a lot of expression.  I’m going to experiment with some reeds plates, just out of curiousity.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Melodica reeds
« Reply #3 on: August 19, 2019, 09:29:09 AM »

It might also be because if a difference in the air pressure they use.  I’ve seen similar tip features on Harmonium reeds.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Sebastian

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1056
Re: Melodica reeds
« Reply #4 on: August 19, 2019, 12:24:01 PM »

Hohner melodica ... These are stainless steel
Are you sure, they are steel reeds? I thought Hohner would use only brass reeds. What melodica model is it?
Logged

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Melodica reeds
« Reply #5 on: August 19, 2019, 01:00:16 PM »

Well..they are steel, not brass. But I suppose they might not be stainless..although wouldn’t that mean they'd be prone to rust/corrosion?  What do you make of the photo?
It’s a Hohner Student 32
Theo ..on your point. Lower pressure/less air/slower air flowing over the reed= higher pitch? So on my tuning table which doesn't make as much pressure as inside the box, reeds tend to sound (a little bit) sharper. I notice that the melodica reeds pretty much gave me the same pitch in/out of the instrument, so perhaps ones breath doesn’t produce so much pressure.
« Last Edit: August 19, 2019, 01:06:52 PM by RogerT »
Logged

Sebastian

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1056
Re: Melodica reeds
« Reply #6 on: August 19, 2019, 02:32:21 PM »

Well..they are steel, not brass. But I suppose they might not be stainless..although wouldn’t that mean they'd be prone to rust/corrosion?  What do you make of the photo?
It’s a Hohner Student 32
Harmonicas had always had brass reeds because of the humidity in the player’s breath. Only a few years ago one maker of harmonica reeds (not Hohner) has started to make stainless steel reeds. Therefore I can hardly believe your reeds to be made from (stainless) steel. Could they be made from aluminium? Maybe someone at melodicaworld.com knows more details.
Logged

Tiposx

  • Durham in England
  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 259
Re: Melodica reeds
« Reply #7 on: August 19, 2019, 02:51:15 PM »

Looks as if the Hohner might have been hot-rodded. I can only find ss reeds as standard on a Seydel harmonica.
« Last Edit: August 19, 2019, 02:54:54 PM by Tiposx »
Logged

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Melodica reeds
« Reply #8 on: August 19, 2019, 04:35:49 PM »

I don't know in that case what the reeds are made of. They aren't brass coloured - they certainly look like steel to me. I've emailed Hohner in Germany to see if they can tell me.
« Last Edit: August 19, 2019, 04:42:04 PM by RogerT »
Logged

Sebastian

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1056
Re: Melodica reeds
« Reply #9 on: August 19, 2019, 06:19:09 PM »

I don't know in that case what the reeds are made of. They aren't brass coloured - they certainly look like steel to me. I've emailed Hohner in Germany to see if they can tell me.
Yes. The colour puzzled me, too. :o Please let us know when Hohner has sent an answer. (:)
Logged

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: Melodica reeds
« Reply #10 on: August 19, 2019, 07:25:21 PM »

Have you tried a magnet on them Roger ? 'stainless' stainless non magnetic, mostly stainless mildly magnetic compared to steel
A spot of copper sulphate solution will distinguish between steel and non ferrous by turning coppery coloured on steel due to the iron content

'Course if they are steel bronze reeds................
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Melodica reeds
« Reply #11 on: August 20, 2019, 07:16:03 AM »

I have stainless steel reeds in my Organette, the original ones were brass and had more or less decomposed. I think possibly the original player was blowing alcohol fumes into it which can’t be good.
Alcohol fumes? Yep, that’s why I went for Harmonicas ( Czech Republic ) stainless. Why change a habit of a lifetime.  8)
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Melodica reeds
« Reply #12 on: August 20, 2019, 02:48:19 PM »

OK, Hohner got back to me. The reeds are brass! Apologies for suggesting otherwise. Maybe saliva discolours the metal (sorry if you are eating your dinner while reading this).

Sebastian

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1056
Re: Melodica reeds
« Reply #13 on: August 21, 2019, 08:52:28 AM »

Maybe saliva discolours the metal
Hardly any saliva gets into the instrument. It’s only the humidity of the players breath wich condenses. – Still, the colour is strange. Did you buy it used? Maybe the original owner has tinkered with it?

The original reeds and reed plate should look like on this page: http://www.melodicaworld.com/post_reviews/hohner-student-32/
Logged

Tiposx

  • Durham in England
  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 259
Re: Melodica reeds
« Reply #14 on: August 21, 2019, 12:14:30 PM »

The reeds in the original photo look nothing at all like brass.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal