Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2] 3   Go Down

Author Topic: Lester's Hohner Hotrod Demos on Hohner Repair and Upgrading  (Read 29994 times)

0 Members and 1 Guest are viewing this topic.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Lester's Hohner Hotrod Demos on Hohner Repair and Upgrading
« Reply #20 on: May 01, 2020, 07:08:10 PM »

Pokerwork/Erica treble spring wire is .50mm for the short levers and 0.55mm for the long levers. The material is steel spring wire Also known as piano wire. 

Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Nigel.H

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 586
Re: Lester's Hohner Hotrod Demos on Hohner Repair and Upgrading
« Reply #21 on: May 01, 2020, 08:13:05 PM »

....which may equate (in either case ) better to 24 gauge than 22.....but even the 'Tina fettler's were in the grey zone +/- 1 or 2 on the scale.
Logged

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Lester's Hohner Hotrod Demos on Hohner Repair and Upgrading
« Reply #22 on: May 01, 2020, 08:39:54 PM »

Or, as Lester puts it, 2.5mm and 2.7mm and it does make a difference (he says). [edit: Something's odd. I suspect he may not have meant mm]

I would expect that it is equally important to get the material right.
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Lester's Hohner Hotrod Demos on Hohner Repair and Upgrading
« Reply #23 on: May 01, 2020, 10:26:15 PM »

Gauge can mean many things.  See the columns at right for music wire size.

Logged

Nigel.H

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 586
Re: Lester's Hohner Hotrod Demos on Hohner Repair and Upgrading
« Reply #24 on: May 02, 2020, 10:06:47 AM »

Re. the "right" material, generic "Piano Wire" can be sourced in plain steel, Phosphor Bronze or Stainless - all have their advocates.  The only one which will rust will be the plain, which was probably all that was generally available when they were originally being built.  Several 'high end' modern makers advertise that they use stainless.  Several budget suppliers still promote 'plain'.  There seem to be various discussions about the comparative merits of each, some dependent on ease of supply and PB seems to have the majority vote, but each to their own.

I think the point is that making springs is (a) doable at home and (b) relatively easy and (c) economically viable.
 
Re Lester's measurements - I fear he may - as in the Bass End bushing video, have his decimals one place out.  I still can't get the hang of all this metric stuff either.
Logged

Reece Johnson

  • Member
  • *
  • Offline Offline
  • Posts: 10
Re: Lester's Hohner Hotrod Demos on Hohner Repair and Upgrading
« Reply #25 on: June 21, 2020, 01:36:41 AM »

these are some great video's. i've binge watched a number of them. one question? you mentioned it's good to destroy a piano accordion. why's that?
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Lester's Hohner Hotrod Demos on Hohner Repair and Upgrading
« Reply #26 on: June 21, 2020, 08:03:07 AM »

these are some great video's. i've binge watched a number of them. one question? you mentioned it's good to destroy a piano accordion. why's that?
Just a joke amongst melodeon players

Stockaryd

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 255
Re: Lester's Hohner Hotrod Demos on Hohner Repair and Upgrading
« Reply #27 on: August 20, 2020, 02:03:22 PM »

If you want restrict treble action on one Erica, which size of piece of wood would be best?   
Logged
Hohner Corso, Hohner Erica, Emmanuel Pariselle, Gessner,   Koch,   Mariotti,    "China  NoName",   4 Toy,     -and now some more

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Lester's Hohner Hotrod Demos on Hohner Repair and Upgrading
« Reply #28 on: August 20, 2020, 03:01:22 PM »

If fitting the wood bar under the inboard end of the levers as shown here then you have to adjust the thickness to fit the space.  Not all Ericas need the same, some even need a bar with a slight taper.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Stockaryd

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 255
Re: Lester's Hohner Hotrod Demos on Hohner Repair and Upgrading
« Reply #29 on: August 20, 2020, 04:02:12 PM »

OK  Theo.  thank you for the tip.

I like my Erica,  . . .  but I love my Liliput which I play most of the time.

But now I found som cracks in the Erica fingerboard  (not made by me)   and I  can see some  put their fingers deeeep down, so I have to restrict it a little.
And I have glued the cracks.   -  With hide glue!    ;) 
Logged
Hohner Corso, Hohner Erica, Emmanuel Pariselle, Gessner,   Koch,   Mariotti,    "China  NoName",   4 Toy,     -and now some more

Nigel.H

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 586
Re: Lester's Hohner Hotrod Demos on Hohner Repair and Upgrading
« Reply #30 on: August 20, 2020, 09:15:25 PM »

I appreciate the permanency of the timber 'fillet' to restrict the action, but, I have found some success using heavy gsm (300 'ish ) card.

Triple layered.....it can be graduated to apply more 'meat' beneath the rear most levers and less for the foremost.  Some lo-tack tape keeps it all together along it's length and it can be overlaid with felt to soften the action even more and fine tune the action further, if required.  It does not need to be 'fixed' per se if cut to be a snug fit.

Being strips of card it can be increased/reduced/broadened/narrowed with no hassle/cost implication until perfected, with a craft knife or roller cutter.
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Lester's Hohner Hotrod Demos on Hohner Repair and Upgrading
« Reply #31 on: October 19, 2021, 04:39:48 PM »

New video, not Hohner but a How To for fixing a sticky key on an open keyboard, Dino Baffetti in this case


https://youtu.be/wGWIpqN1w3U

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Lester's Hohner Hotrod Demos on Hohner Repair and Upgrading
« Reply #32 on: November 13, 2021, 08:43:56 PM »

Ep. 1 of a new series on the refurb of a late 80's Castagnari Sander, making good and adding two stops to the bass end


https://youtu.be/vSztTt1SRAg

Gav Wood

  • Good talker
  • **
  • Offline Offline
  • Posts: 99
Re: Lester's Hohner Hotrod Demos on Hohner Repair and Upgrading
« Reply #33 on: November 14, 2021, 05:10:50 AM »

I like your scientific mixing. The ultrasonic cleaner is on my christmas list, in a recent project i missed cleaning a couple of reeds by accident and they are still causing me problems. Thanks for recording it.
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Lester's Hohner Hotrod Demos on Hohner Repair and Upgrading
« Reply #34 on: November 29, 2021, 09:06:46 AM »

Ep. 2 of the Sander Refurb is now published, covers tuning.

https://youtu.be/BpG7PuJ5q9w

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Lester's Hohner Hotrod Demos on Hohner Repair and Upgrading
« Reply #35 on: December 14, 2021, 09:04:19 PM »

Ep.3 of the Sander Refurb now live, covers bushing the bass buttons

https://youtu.be/Dx5Sn8hf2y8

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Lester's Hohner Hotrod Demos on Hohner Repair and Upgrading
« Reply #36 on: December 28, 2021, 03:16:57 PM »

Parts 4a and 4b of the Sander Refurb - Fitting Bass Stops


Part 4a   -   Part 4b

Gena Crisman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1108
  • 🇬🇧
Re: Lester's Hohner Hotrod Demos on Hohner Repair and Upgrading
« Reply #37 on: December 28, 2021, 07:12:46 PM »

When I saw that plastic sheet in the back I was all 'oh hey, I wonder...' - pretty wild to find I've offered you a tip! I'm glad that it worked out for you here!

I don't recall if I said so in the original thread, but, you know how you got those horrible little like, plastic wormy bits on the edges when you drill it? And if you try to file the edges of the plastic smooth, you really just seem to make... more worms? A little bit of some kinda metal polish, eg Brasso or Autosol, and for eg the holes, something like https://www.amazon.co.uk/Dremel-422-Polishing-Cone/dp/9733342106 - cone shaped polishing bits - tends to clean up the edges quite nicely and sorts out those crumby bits. I bought a huge bag of knock off polishing tips on ebay at some point, and those worked well.

It's important to note that PETG is a thermoplastic so, can be shaped/deformed by heat - other kinds of plastic are available. Although it seemed to work ok for me! I do wonder if it/a similar product could be a) safely be cut with a heated blade or b) smoothed with some kind of heated tip. With the square holes, I do also rather wonder if it could be gingerly chiseled through with your template? I did the majority of my cuts with a pair of scissors, which felt very odd, and I had the luxury of matching up against round holes.

Thank you for continuing your series here with these Sander videos.
Logged

Giles

  • New Starter
  • Offline Offline
  • Posts: 2
Re: Lester's Hohner Hotrod Demos on Hohner Repair and Upgrading
« Reply #38 on: February 28, 2022, 07:22:59 PM »

Hello first posting from me. Following Workgroup Absolute Beginners workshop a few weeks back, I decided  to have a go at limiting the keyboard action, having found Lester’s excellent video.

However inside my Chinese pokerwork, I have discovered that the keyboard screws are buried under two very deliberate blobs of glue.

Any recommendations how I remove this glue so that I can proceed ?

Also any idea where I can source a small quantity of model fixing screws - seems a waste to buy a hundred online ?
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Lester's Hohner Hotrod Demos on Hohner Repair and Upgrading
« Reply #39 on: February 28, 2022, 07:33:38 PM »

Hello first posting from me. Following Workgroup Absolute Beginners workshop a few weeks back, I decided  to have a go at limiting the keyboard action, having found Lester’s excellent video.

However inside my Chinese pokerwork, I have discovered that the keyboard screws are buried under two very deliberate blobs of glue.

Any recommendations how I remove this glue so that I can proceed ?

Also any idea where I can source a small quantity of model fixing screws - seems a waste to buy a hundred online ?
I usually cut away at the glue with a scalpel until the screw head is revealed. Be very careful with the screws they are made of cheese and will snap if cross threaded (Ask me how I know :) ). My source of small screws is Model Fixings, for this job suitable length pan head self tappers is my choice.
Pages: 1 [2] 3   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal