Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Bass / Chord Reed Source for B/C Burke Tuning  (Read 942 times)

0 Members and 1 Guest are viewing this topic.

IanK

  • Good talker
  • **
  • Offline Offline
  • Posts: 54
Bass / Chord Reed Source for B/C Burke Tuning
« on: September 01, 2019, 01:28:54 PM »

Hi All

I have sorted up an old Hohner Double Ray and with guidance here managed to retune the bass reeds to the 'modern' system (except I have Bmin/F rather than C/F).

This system has C/G and G/D pairings. I would like to try the Joe Burke system where these pairs would be G/G and D/D.

Looking for advice on a source for suitable reeds that would sound good along with the other original H reeds in the box and would fit the reed blocks with minimum need to alter the blocks.

thanks Ian
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Bass / Chord Reed Source for B/C Burke Tuning
« Reply #1 on: September 01, 2019, 01:42:45 PM »

If you prefer old reeds then an old Hohner piano box is a good source.  For new reeds ask Charlie Marshall
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

IanK

  • Good talker
  • **
  • Offline Offline
  • Posts: 54
Re: Bass / Chord Reed Source for B/C Burke Tuning
« Reply #2 on: September 01, 2019, 02:51:46 PM »

Thanks Theo,

Would the old Hohner PA reeds be likely to fit the chambers without need to modify?

If not then I will try Charlie and see what he recommends.

Cheers Ian
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Bass / Chord Reed Source for B/C Burke Tuning
« Reply #3 on: September 01, 2019, 03:16:54 PM »

The low bass reeds won't fit without modifying the block.  You should find some that work for the chords.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal