Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Compression work, Lilliput  (Read 1718 times)

0 Members and 1 Guest are viewing this topic.

Mark Leue

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 175
Compression work, Lilliput
« on: September 07, 2019, 01:24:07 AM »

Having got my reeds sorted out by Lester Bailey recently I am enjoying playing my Hohner Lilliput.
I am realizing that the box is not as tight as I might wish, however. I replaced the bellows gaskets with appropriately sized and carefully installed neoprene gaskets the other day, which may have helped.
It seems to me that the next thing to do is prioritize what to work on next based on what is the biggest air leak.

So the bellows themselves _look_ okay. I guess I could isolate them by perhaps making temporary ends  and testing to see how tight they are without the rest of the accordion attached?
Having just disassembled the keyboard earlier this week to instal a strip of leather so the buttons don't go quite so deep I see that working on a Lilliput is a little fussy. I may not choose to do something like pallet refacing myself, as I can imagine changing the thickness of the pallets facings may make getting that difficult keyboard to work correctly again a minor nightmare.

I guess this brings me to my most important question. How do I determine where the biggest leaks are exactly. There are definitely no big ones, but it could be tighter feeling.
Logged

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Compression work, Lilliput
« Reply #1 on: September 07, 2019, 08:00:03 AM »

Ive found that most Lilliput bellows seem a bit sloppy though not leaking.( those that I’ve tried that is)
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Compression work, Lilliput
« Reply #2 on: September 07, 2019, 08:37:51 AM »

Ive found that most Lilliput bellows seem a bit sloppy though not leaking.( those that I’ve tried that is)
Agreed, Liliputs do feel 'softer' than all the other boxes I play.

Eshed

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 447
Re: Compression work, Lilliput
« Reply #3 on: September 07, 2019, 08:44:48 AM »

Note that leaks are usually in connections between bits i.e, lines, so they grow linearly with dimension grow, but the amount of air needed to move the bellows grows as a square of the dimension grow.
That means that:
An equivalent leak in a Liliput and a bigger box will result in more bellows movement in the Liliput. That includes the case when there's barely any leak - a bigger box will feel more resistant to moving the bellows with no button pressed than a Liliput just because you're moving less air through a similar gap.
Logged
Do you have a Hohner from 1934-1945 with a serial number on?
Send me a private message or comment on the German Accordion Problem spreadsheet to improve the statistics of the project and get an estimate of the production date of the box if it is not known.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Compression work, Lilliput
« Reply #4 on: September 07, 2019, 09:14:22 AM »

I’ve found air leaks in the following places on Liliputs:
Open screw holes
Pallets - including air valve
Bellows gaskets
Holes in bellows gussets
Joints at the corners of bellows frames
Failing glue between bellows and bellows frames
Bellows that have become porous with age
Cracks at the corners of the case
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: Compression work, Lilliput
« Reply #5 on: September 07, 2019, 02:37:35 PM »

Note that leaks are usually in connections between bits i.e, lines, so they grow linearly with dimension grow, but the amount of air needed to move the bellows grows as a square of the dimension grow.
That means that:
An equivalent leak in a Liliput and a bigger box will result in more bellows movement in the Liliput. That includes the case when there's barely any leak - a bigger box will feel more resistant to moving the bellows with no button pressed than a Liliput just because you're moving less air through a similar gap.

I don't think that is quite right.
The same volume leakage in a Liliput will result in a bigger bellows movement because the cross section (Height x Width) of the Liliput bellows is smaller.

(Bellows Volume Change= Height x Width x distance moved at the LH end= volume leaked).

So with smaller bellows size more movement for same volume.

smaller bellows might also feel a bit softer because the cross section area is smaller. Pressure = Force / Area

Pressure drives air through the reeds. Area of end plate of bellows is constant within instruments but different between larger/smaller models. so same force will produce higher pressure. M personal impression though is that the pressure generated by bellows is quite small.

Logged

Mark Leue

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 175
Re: Compression work, Lilliput
« Reply #6 on: September 07, 2019, 02:51:49 PM »

Re pallet refacing,
How difficult is readjusting the fingerboard action if I use a double layer Leather/felt?  Would refacing with same size material but newer (IE single layer leather) make much difference?
I'm going to take a closer look at the bellows and the glue joint to the frames and see if theres much softness there...
In the end, it may just be a matter of getting used to the feel. It's fine when I'm playing slower tunes, but I feel a bit breathless at times when I'm trying to crank something out. Could be experience  will help me adapt.
Logged

Eshed

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 447
Re: Compression work, Lilliput
« Reply #7 on: September 07, 2019, 03:26:07 PM »

I don't think that is quite right.
The same volume leakage in a Liliput will result in a bigger bellows movement because the cross section (Height x Width) of the Liliput bellows is smaller.

(Bellows Volume Change= Height x Width x distance moved at the LH end= volume leaked).

So with smaller bellows size more movement for same volume.

smaller bellows might also feel a bit softer because the cross section area is smaller. Pressure = Force / Area

Pressure drives air through the reeds. Area of end plate of bellows is constant within instruments but different between larger/smaller models. so same force will produce higher pressure. M personal impression though is that the pressure generated by bellows is quite small.

I've meant exactly what you've written, perhaps just not as clear :)
Logged
Do you have a Hohner from 1934-1945 with a serial number on?
Send me a private message or comment on the German Accordion Problem spreadsheet to improve the statistics of the project and get an estimate of the production date of the box if it is not known.

Mark Leue

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 175
Re: Compression work, Lilliput
« Reply #8 on: September 07, 2019, 03:48:37 PM »

I wish there was something like a "smoke test" so I could really see where the air was going. another spot that might be leaking is the reed block seats... so many possibilities. Looking for the ripest low hanging fruit of course.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Compression work, Lilliput
« Reply #9 on: September 07, 2019, 04:01:29 PM »

You can check the base of the reed blocks by fitting one block and placing a slip of paper under the block and near the centre.  If the fit is good you should not be able to pull the paper out.  You will usually see blackening of the gasket under the blocks from dust that has been trapped from leaking air.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Mark Leue

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 175
Re: Compression work, Lilliput
« Reply #10 on: September 07, 2019, 06:27:40 PM »

I was playing around with the box and tried seeing how much air comes out a bellows pin hole if you remove the pin. It's surprising how strong that jet of air feels on your cheek.  Are ill fitting bellows pin holes a common air leak?  I guess you can either fill them in with epoxy putty and re-drill or go to the next largest size pin.
Logged

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Compression work, Lilliput
« Reply #11 on: September 08, 2019, 10:16:53 AM »

Re pallet refacing,
How difficult is readjusting the fingerboard action if I use a double layer Leather/felt?  Would refacing with same size material but newer (IE single layer leather) make much difference?
I'm going to take a closer look at the bellows and the glue joint to the frames and see if theres much softness there...
In the end, it may just be a matter of getting used to the feel. It's fine when I'm playing slower tunes, but I feel a bit breathless at times when I'm trying to crank something out. Could be experience  will help me adapt.
I would advise against this. If you remove the keyboard cover the keys are loose and tricky to thread back into the board. And...my working theory on this is to replace facings with same thickness skin that was put on when it was made. If it was good enough when it was new, it is good enough now, and will save you a lot of hassle. And I personally don’t think an extra layer of felt reduces the sound much more than a fresh covering of new skin does anyway.

folkloristmark

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 582
    • street entertainers
Re: Compression work, Lilliput
« Reply #12 on: September 08, 2019, 11:28:55 AM »

Dont repallet unless really needed and keep original, Liliputs do want more air. There is a smoke test cover the areas with baby talk powder and you will see all leaks use loads and do were the resultant mess dont matter, remove the covers and apply around the pallets. Its a good idea to know what a good box looks like as well. A lot of my lillies are loose but not leaking I do have some tight little used ones, its a hohner feel you ever like or dont.As Theo said it surprising how much air can be lost through screw holes check the bellows pins the bellow strap fixings and any historical holes on the fondos.A lot of air loss is solved with a proper rewax and reed valve set up. I would recomend plastic valves.But I see lester has attended to you reeds. Do check the block are sitting flat.
« Last Edit: September 08, 2019, 11:30:59 AM by folkloristmark »
Logged
Mark Taylor
Folkloristmark

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Compression work, Lilliput
« Reply #13 on: September 08, 2019, 01:44:17 PM »

I've never tried this but rather than testing the bellows by making new ends why not use clingfilm between box and bellows on both ends?
I can't see why it shouldn't work.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

hallelujahal

  • Member
  • *
  • Offline Offline
  • Posts: 46
  • 'Blood & Fire'
Re: Compression work, Lilliput
« Reply #14 on: September 09, 2019, 09:31:52 PM »

Take one end off, switch off lights and pull curtains, plonk bellows over table lamp, use chalk to mark where you see 💡
Logged

Jon Stapleton

  • Member
  • *
  • Offline Offline
  • Posts: 44
Re: Compression work, Lilliput
« Reply #15 on: September 09, 2019, 09:56:44 PM »

I've never tried this but rather than testing the bellows by making new ends why not use clingfilm between box and bellows on both ends?
I can't see why it shouldn't work.

That is an exceptionally good idea!
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal